Respond to emergencies which threaten electricity generation

advertisement
15570 version 4
Page 1 of 5
Respond to emergencies which threaten electricity generation
Level
5
Credits
15
Purpose
People credited with this unit standard are able to: identify emergencies and
their impact on the power system; identify and communicate current power
system status; select, apply, and coordinate emergency response plan; and
report emergency response.
Subfield
Electricity Supply
Domain
Electricity Supply - Power System Management
Status
Registered
Status date
11 December 2009
Date version published
11 December 2009
Planned review date
31 December 2014
Entry information
Open.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
Electricity Supply Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0120
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
This unit standard can be assessed in a workplace environment, or in a training or
educational environment if simulated equipment response and examples are able to
be provided, or in a combination of both environments. The range statements across
the unit standard can be applied according to industry specific equipment,
procedures, and processes.
2
Safety of personnel and plant must be a priority throughout the assessment. If the
safety requirements are not met the assessment must stop.
 New Zealand Qualifications Authority 2016
15570 version 4
Page 2 of 5
3
Performance and work practices in relation to the elements and performance criteria
must comply with all current legislation, especially the Electricity Act 1992, and any
regulations and codes of practice recognised under that statute; the Health and
Safety in Employment Act 1992; the Electricity Governance Regulations and Rules
(EGRs); and the Resource Management Act 1991. Electricity supply industry codes
of practice and documented industry procedures include the Safety Manual –
Electricity Industry (SM-EI) (2004) Wellington: Electricity Engineers’ Association. A
full list of current legislation and industry codes is available from the Electricity Supply
Industry Training Organisation, PO Box 1245, Waikato Mail Centre, Hamilton 3240.
4
The phrase in accordance with industry requirements is implicit in all elements and
performance criteria in this unit standard.
5
Industry requirements include all asset owner requirements; manufacturers’
specifications; and enterprise requirements which cover the documented workplace
policies, procedures, specifications, and business and quality management
requirements relevant to the workplace in which assessment is carried out.
6
For this unit standard emergencies may include but are not limited to – eruption,
flood, landslide, dam break, earthquake, storms, unusual observations, bomb threat,
environmental issues, fire, serious accidents, armed threat, equipment failure or
distress.
Elements and performance criteria
Element 1
Identify emergencies and their impact on the power system.
Performance criteria
1.1
The emergency and the cause of the emergency are identified using all
available resources.
Range
may include but is not limited to – reports from external agencies
and public, System Control and Data Acquisition (SCADA),
weather forecasting, monitoring systems, alarms.
1.2
The impact of the emergency on the power system is identified and analysed.
1.3
The impact of the emergency is promptly communicated to required individuals
and groups.
 New Zealand Qualifications Authority 2016
15570 version 4
Page 3 of 5
Element 2
Identify and communicate current power system status.
Range
may include but is not limited to – unavailable plant, system open point
configuration, plant loadings, system and substation voltages, temporary
constraints, indications and alarms, hydraulic storage, inflows, outflows,
dispatch, plant status, generation flows, spillways, monitoring equipment
problems and faults, hydrological structures, boilers, fuel supply systems, black
start.
Performance criteria
2.1
Power system status is determined.
Range
2.2
Planned outages and/or constraints that impact on equipment status are
identified and their impact determined and recorded in the required format.
Range
2.3
may include but is not limited to – SCADA and panel
instrumentation, received communication and reports.
may include but is not limited to – prepared outages and switching
plans.
Current power system status is communicated to appropriate individuals and
groups.
Element 3
Select, apply, and coordinate emergency response plan.
Performance criteria
3.1
Emergency response plans are selected.
Range
3.2
The power system is stabilised.
Range
3.3
may include but is not limited to – existing plans, new plans.
may include but is not limited to – system frequency and/or voltage
excursions, system stability, levels, flows, flow divisions, flood
control measures, spilling, sluicing, maximum generation, bypass
operation, indications, alarms and protective relay operation
acknowledged and reset, active and reactive power outputs
stabilised.
Emergency response is coordinated and applied in accordance with established
emergency response plan.
 New Zealand Qualifications Authority 2016
15570 version 4
Page 4 of 5
3.4
Plant and equipment operation is maintained.
Range
may include but is not limited to – local control, contingency plans,
emergency operating procedures.
3.5
Emergency coordination ensures staff and public safety is maintained at all
times.
3.6
External emergency agencies are identified and notified in accordance with
emergency plan and local operating procedures.
Range
may include but is not limited to – Police, Fire Service, Ambulance,
Civil Defence, local authorities, Occupational Safety and Health.
3.7
Handover of emergency response authority is made.
3.8
Emergencies are notified to the system operator.
3.9
The emergency is continually analysed to identify options to remedy or mitigate
undesired conditions and identify future actions using established analysis tools
and procedures.
Range
may include but is not limited to – enterprise restoration plans and
procedures, notification of defect to initiate repair, contingency
analysis tools.
Element 4
Report emergency response.
Range
may include but is not limited to – Electricity Governance Regulations and Rules
(EGRs); logging, reports, log book, database systems, statistics, test reports
and results, plant status changes, plant history, access permit, work authority,
service report, permits, entry approval, event lists, generator availability data
system, generation management system, maintenance management system,
electronic log, operating orders, switching sheets, plant outage requests, data,
check sheets, statistical log sheets.
Performance criteria
4.1
Recorded information is accurate, complete, concise, and legible.
4.2
Power system control information is recorded and filed.
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
 New Zealand Qualifications Authority 2016
15570 version 4
Page 5 of 5
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Electricity Supply Industry Training Organisation info@esito.org.nz if
you wish to suggest changes to the content of this unit standard.
 New Zealand Qualifications Authority 2016
Download