NZQA registered unit standard
27280 version 1
Page 1 of 4
Title
Analyse lighting and technology requirements and apply to
developed kitchen or bathroom designs
Level
5
Purpose
Credits
8
This unit standard is for experienced people working in the area
of kitchen or bathroom design and planning.
People credited with this unit standard are able to: analyse
lighting and technology requirements to develop kitchen or
bathroom designs; and apply lighting and technology
requirements to developed kitchen or bathroom designs.
Classification
Design > Kitchen and Bathroom Design
Available grade
Achieved
Explanatory notes
1
References
AS/NZS 1680.2.4:1997 Interior lighting – Industrial tasks and processes; available at
http://www.standards.co.nz.
Compliance document for New Zealand Building Code, Clause G1, Personal
Hygiene, available at http://www.dbh.govt.nz.
2
Legislation that applies to this unit standard includes – Health and Safety in
Employment Act 1992.
3
Definitions
Worksite requirements – refer to instructions to staff on policy and procedures which
are documented in memo or manual format and are available in the workplace.
These requirements include but are not limited to – company specifications and
procedures, work instructions, manufacturer’s specifications, product quality
specifications, legislative requirements.
Client – refers to the person who has commissioned the design brief.
Kitchen or bathroom design brief – refers to the design parameters agreed between
the kitchen or bathroom designer and the client.
4
Evidence is required of a minimum of two different kitchen or bathroom designs.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
27280 version 1
Page 2 of 4
Outcomes and evidence requirements
Outcome 1
Analyse lighting requirements to develop kitchen or bathroom designs.
Evidence requirements
1.1
Types of lighting used in a kitchen or bathroom are analysed in terms of their
function, client requirements, legislative requirements and the references.
Range
1.2
Lighting options are identified and analysed to determine their suitability to meet
the kitchen or bathroom design brief.
Range
1.3
types of lighting include but are not limited to – incandescent,
fluorescent, halogen, low-voltage, light emitting diode (LED).
suitability includes but is not limited to – aesthetics, function, cost,
availability.
Lighting options are communicated to the client in accordance with worksite
requirements.
Outcome 2
Analyse technology requirements to develop kitchen or bathroom designs.
Evidence requirements
2.1
Types of technology used in a kitchen or bathroom are analysed in terms of
their function, client requirements, legislative requirements and the references.
Range
2.2
Technology options are identified and analysed to determine their suitability to
meet the kitchen or bathroom design brief.
Range
2.3
types of technology may include but are not limited to – integrated
systems, sound systems, smart appliances;
evidence relating to a minimum of two types of technology is
required.
suitability includes but is not limited to – aesthetics, function, cost,
availability.
Technology options are communicated to the client in accordance with worksite
requirements.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
27280 version 1
Page 3 of 4
Outcome 3
Apply lighting and technology requirements to developed kitchen or bathroom designs.
Evidence requirements
3.1
Lighting and technology requirements are incorporated into the developed
kitchen or bathroom design in accordance with worksite requirements and the
kitchen or bathroom design brief.
3.2
Client approval for the lighting and technology requirements and the developed
design is sought in accordance with worksite requirements.
Replacement information
Planned review date
This unit standard replaced unit standard 24686.
31 December 2016
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
20 May 2011
N/A
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMRs). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
27280 version 1
Page 4 of 4
Comments on this unit standard
Please contact the Building and Construction Industry Training Organisation
info@bcito.org.nz if you wish to suggest changes to the content of this unit standard.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016