15073
15-Apr-20
1 of 3 level: credit: planned review date: sub-field: purpose:
MARITIME ENGINEERING
Prepare a restricted limits vessel for slipping and unslipping
2
3
July 2000
Maritime
People credited with this unit standard are able to prepare a restricted limits vessel for slipping and unslipping. entry information: accreditation option: moderation option:
Open.
Evaluation of documentation by NZQA and industry.
A centrally established and directed moderation system has been established by Maritime Qualifications New Zealand
(Inc). special notes: 1 This unit standard is a general maintenance engineerin g standard designed for owner operator’s restricted limits vessel’s, owner operator’s in-shore vessel’s that do not carry a marine engineer as part of the crew.
2 Safety equipment requirements for restricted limits vessel size and classification are detailed by the
Maritime Safety Authority (MSA) in the New Zealand
Gazette; 190; (1989).
New Zealand Qualifications Authority 2020
15073
15-Apr-20
2 of 3
MARITIME ENGINEERING
Prepare a restricted limits vessel for slipping and unslipping
3 Vessel operating procedures as specified in the vessel’s safe ship management policies. This includes compliance with legislation relevant to this standard which includes, but is not limited to the Maritime
Transport Act 1994, the Health and Safety in
Employment Act 1992, Resource Management Act
1991, Harbours Act 1950, and their subsequent amendments.
Elements and Performance Criteria element 1
Prepare a restricted limits vessel for slipping and unslipping. performance criteria
1.1 Safety requirements in slipping and unslipping the vessel are identified and explained in accordance with local harbour regulations, by-laws, MSA statutory requirements and the vess el operator’s safe ship management policy and procedures.
1.2 Underwater fittings to be overhauled or repaired are identified in accordance with survey requirements for the vessel size and classification detailed by the
Maritime Safety Authority.
Range: may included but is not limited to - shipside valves and grids, tank drain plugs, tailshafts, rudders.
New Zealand Qualifications Authority 2020
15073
15-Apr-20
3 of 3
MARITIME ENGINEERING
Prepare a restricted limits vessel for slipping and unslipping
1.3 Repairs and overhauls to underwater machinery and fittings are completed and confirmed. The watertight integrity of the hull is confirmed as restored in accordance with survey requirements for the vessel size and classification detailed by the Maritime Safety Authority.
Range: machinery and fittings may include but are not limited to - shipside valves and grids, tank drain plugs, tailshafts, rudders.
Comments to:
Maritime Qualifications New Zealand (Inc)
Unit Standard Revision
PO Box 160
WELLINGTON by July 2000.
Please Note: Providers must be accredited by the Qualifications Authority before they can offer programmes of education and training assessed against unit standards.
Accredited providers assessing against unit standards must engage with the moderation system that applies to those unit standards. [Please refer to relevant Plan ref: 0054]
New Zealand Qualifications Authority 2020