Launch and retrieve boats by gridding and by using winch... methods

advertisement
9920 version 4
Page 1 of 3
Launch and retrieve boats by gridding and by using winch and pump
methods
Level
4
Credits
10
Purpose
People credited with this unit standard are able to prepare boats and
associated equipment and facilities, and cradle and uncradle boats.
This unit standard is applicable to all sectors of the boating industry.
Subfield
Boating Industries
Domain
Marine Sales and Services
Status
Registered
Status date
7 May 1997
Date version published
20 March 2009
Planned review date
31 December 2012
Entry information
Open.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
Boating Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0136
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
Company procedures – the documented procedures for the equipment and/or
worksite.
2
This unit standard does not cover the operation of winching and pumping equipment
itself.
3
Evidence of the elements of this unit standard must be presented across the
following contexts:
a winch methods – slipways, synchronised lift (synchrolift).
b pump methods – dry docks, floating docks.
Evidence is required for slipways, plus one other method of the learner’s own
choice.
 New Zealand Qualifications Authority 2016
9920 version 4
Page 2 of 3
4
The following apply to the performance of all elements of this unit standard:
a All required equipment must be set up, started up, operated, and shut down in
accordance with company procedures.
b All work practices must meet recognised codes of practice and documented
worksite health and safety procedures (where these exceed code) for personal,
product, and worksite health and safety, and must meet the obligations required
under the Health and Safety in Employment Act 1992, and subsequent and
delegated legislation.
c All work practices must meet recognised codes of practice and documented
worksite environmental procedures (where these exceed code) for personal,
product, and worksite environmental matters, and must meet the obligations
required under the Resource Management Act 1991, and subsequent and
delegated legislation.
d All work practices must meet documented worksite quality management
requirements. These include documentation of activities, events, and decisions.
e All communications made in relation to this unit standard must be made in
accordance with company procedures for content, recipient, timing, and method.
5
This unit standard can be assessed on job.
Elements and performance criteria
Element 1
Prepare boats and associated equipment and facilities.
Performance criteria
1.1
Selection of containment system matches boat characteristics and task
requirements.
Range
containment system – ground support, keel blocks, props;
boat characteristics – hull shape, hull type, appendages, and
protrusions;
task requirements include but are not limited to – rudder removal,
access to keel.
1.2
Boat is prepared for launching and retrieving without damage, and in a manner
that prevents damage during subsequent launching and retrieving.
1.3
Boat is trimmed to match the requirements of the containment system.
1.4
Boat and associated equipment and facilities are checked as operational and as
meeting any regulatory requirements before launching and retrieving begins.
 New Zealand Qualifications Authority 2016
9920 version 4
Page 3 of 3
Element 2
Cradle and uncradle boats.
Performance criteria
2.1
Containment system is positioned so that there is sufficient draught of water to
land the boat on the containment system.
2.2
The floating boat is secured to, and positioned over, the containment system so
that there will be no damage on landing and/or subsequent re-launching.
2.3
Landing and re-launching are monitored visually and aurally so that contingency
action can be taken before damage or injury can occur.
Range
contingency actions – re-land, re-launch, provide additional or
alternative containment system.
2.4
Boat is secured to containment system so that it remains upright while the boat
is out of the water.
2.5
Actions taken ensure the security of people, equipment, boat, and working area
while the boat is out of the water.
Range
actions include but are not limited to – securing of trolleys,
positioning of pump outlets, restriction of public access.
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Boating Industry Training Organisation training@bia.org.nz if you wish
to suggest changes to the content of this unit standard.
 New Zealand Qualifications Authority 2016
Download