Identify the characteristics of aluminium alloys relevant to boatbuilding

advertisement
9944 version 4
Page 1 of 3
Identify the characteristics of aluminium alloys relevant to boatbuilding
Level
2
Credits
2
Purpose
People credited with this unit standard are able to identify the chemical
composition of aluminium alloys, and identify the engineering characteristics
of aluminium alloys.
Subfield
Boating Industries
Domain
Boatbuilding
Status
Registered
Status date
7 May 1997
Date version published
20 March 2009
Planned review date
31 December 2012
Entry information
Open.
Accreditation
Evaluation of documentation by NZQA and industry.
Standard setting body (SSB)
Boating Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0136
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
This unit standard covers the following aluminium alloys, as specified in AS 2848.1:1998
Aluminium and aluminium alloys – Compositions and designations – Wrought products.
 New Zealand Qualifications Authority 2016
9944 version 4
Page 2 of 3
Elements and performance criteria
Element 1
Identify the chemical composition of aluminium alloys.
Performance criteria
1.1
Characteristics of aluminium alloy compositions are identified in terms of their
physical properties.
Range
1.2
yield stress, proof stress, ultimate tensile stress, percent
elongation, impact strength, toughness, fatigue strength, wear
resistance, hardness.
The chemical compatibility of different aluminium alloys is explained in terms of
their compositions.
Element 2
Identify the engineering characteristics of aluminium alloys.
Performance criteria
2.1
Characteristics of aluminium alloys are identified and explained in terms of their
applications.
Range
2.2
mechanical properties, machinability, castability, weldability,
formability, corrosion resistance.
Manufacturing processing effects are identified and related to the characteristics
of aluminium alloys.
Range
processes – cold working, hot working, thermal;
effects – changes in strength, hardness, ductility, toughness.
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
 New Zealand Qualifications Authority 2016
9944 version 4
Page 3 of 3
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Boating Industry Training Organisation training@bia.org.nz if you wish
to suggest changes to the content of this unit standard.
 New Zealand Qualifications Authority 2016
Download