EN 12163/12420 CW308G | CuAl11Ni5Fe5 | Nickel Aluminium Bronze 1 di 2 https://www.copperalloys.net/alloys/en-12163-cw308g.php#! Tel +44 (0) 1782-816888 Email sales@copperalloys.net Equivalent Specifications DIN 17665 1983 2.0978 DIN 17678 1983 2.0978 DIN 17672 1983 2.0978 CuAl11Fe6Ni6 CuAl11NI6Fe5 BS EN 12165 CW 308G CuAl11Ni NFL 14-706 NFA 51-116 AMS 4590 C63020 NCT 10-641-01MD CuAl11Ni5Fe5 Description Nickel Aluminium Bronze Nominal Composition CuAl11Ni5Fe5 Alloy Type Wrought Typical Mechanical Properties Tensile Strength (N/mm²) 800 Proof/Yield Strength (N/mm²) 570 Elongation (%) 4 Hardness Brinell 215 Key Features A high strength nickel aluminium bronze that can be heat treated by quench hardening and tempering Typical Uses One of the highest strength aluminium bronzes. Aerospace: Bushings and bearings. General engineering: Wear plates, dies. Impact Izod J20°C Marine: Valves, hydraulic blocks, fixtures and fittings. Typical Physical Properties Density g/cm³ 7.6 Melting Temperature Range °C 1060-1075 Thermal Conductivity W/mK 54 Electrical Resistivity μΩ.m15°C 22 Coefficient of Thermal Expansion 0-250°C 17 Relative Magnetic Permeability Coefficient of Friction Copper Alloys Ltd has the ability to modify existing alloys for improved performance. Many customers have benefited from this in the past. 06/01/2018, 09:36 EN 12163/12420 CW308G | CuAl11Ni5Fe5 | Nickel Aluminium Bronze 2 di 2 https://www.copperalloys.net/alloys/en-12163-cw308g.php#! To discuss your requirements, call a member of Copper Alloys Ltd's technical team on +44 (0) 1782-816888, or email sales@copperalloys.net. This Data is indicative only and must not be seen as a substitute for the full specification from which it is drawn. In particular, the mechanical property requirements vary widely with tempeter, product and product dimensions. The information is based on our present knowledge and is given in good faith. However, no liability will be acepted by the Company in respect of any action taken by any third party in reliance thereon. As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose. Any advice given by the Company to any third party is given for that party's assistance only and without liability on the part of the Company. Any contract between the Company and a customer will be subject to the Company's Conditions of Sale. The extent of the Company's liabilities to any customer is clearly set out in those Conditions, a copy of which is available on request. 06/01/2018, 09:36