Working with the Carousel Gallery
Adding images to the carousel
1. From within the Workbench go to Create Content
a. Click Gallery Carousel
b. Fill in or select the:
i. Title
ii. Groups audience (your Group)
iii. Body copy
c. Under the heading GALLERYIMG (this is the same procedure as with
images)
i. Click “Select Media”
ii. Click “Choose File”
iii. Select photo from computer, click “Open”
iv. Click “Upload”, wait until photo loads
v. Click “Submit”
vi. Fill in “HTML Alt” and “HTML Title” info
vii. Type in Group Audience name (your Group)
viii. Click “Save”
ix. Continue to “Add another item” and repeat until done
x. Click “Save”
Place a carousel on a page using “Existing Node”
1. Locate the carousel in My Workbench  Site Content and
2. Click “edit”
3. In the URL, find the *NID (i.e. node/11111) and copy the just the numeric
portion.
4. Go to the panelizer of the page where you would like to put the carousel.
5. Click “content”
6. Click the gear located in the upper left corner of the main content panel and
click “Add Content.” This opens the “add content” window.
7. Scroll down to the bottom of the “add content” window and select “existing
node.”
8. Enter the NID in the “Enter Title or NID of a node” field
9. Select “Full Content” under Build mode.
10. Click “Finish”
The carousel can be edited by selecting the gear icon on the right side of the area
where the carousel is placed.
*Node I.D.
1
2
3