ME 360 – H10 Name _________________________ 1) Norton text problem 10-3. HOWEVER – only provide side view and end view SKETCHES of your shaft and bearing mounts including locations for sprocket and pedal attachment. No computations are required. 2) Norton text problem 10-6a. Use l=20 inch, a=16 inch, b=18 inch, P=1000 lbf, Tmin=0, Tmax=2000 in.lbf . Use standard ANSI key width and determine key length for infinite life in direct shear with 90% reliability. 3) What is the maximum force F that this shaft can support on its hydrodynamic bearings? What is the minimum film thickness? F Speed: 1800 RPM Bearing DIA.: 3 inches Bearing length: 1 inch Viscosity: 10 reyns Clearance ratio: 0.001 8” 2” ON: 25 Extra credit – Use MATLAB to develop a linear equation that approximates absolute viscosity of SAE engine oil grades 10 through 70 as a function of bulk temperature over the range of 100° F through 220° F. Provide a 3D plot of your data and your approximations with SAE grade on the X axis, temperature on the Y axis and log(visosity) on the Z axis. .