Dimensions :- +0.0 -0.05 Optional Antirotation pin Ø1.5X1.5 Height Mounting Collar Ø10.32 +0.0 -0.00196 (Ø0.4062 ±0.5 ) 12.80 (Ø0.0590 X 0.0590) ±0.02 Ø1.5 (0.5093 (Ø0.06) 3/8"X32 TPI,UNEF-2A ) 8.00 ±0.008 (0.3149 ) ( 0.0472 X 0.0590) (Ø0.8748 ±0.2 ) Slot 1.2 W X 1.5 DEEP Ø22.22 Metric(Inch) +0 -0.05 Shaft Ø6.35 10 Ø3 (Ø0.1181) +0 -0.002 (0.3937) (Ø0.25 ±0.5 9.5 22 ±0.02 (0.3740 ) ±0.5 ±0.02 ) (0.8661 ) (Shaft Length) Features:- 1. Conductive plastic long life resistance element. 2. Anodized Aluminium precision machined body 3. Precious metal high technology wiper gives noise free output. 4. Special smaller electrical angles........ available option. ELECTRICAL CHARACTERISTICS Resistance Element......................... Resistance Range.............. Resistance Tolerance.................. Best Possible Resi.Tolerance...... Standard Independent Linearity Tolerance...(IEC 393).. Best possible Independent Linearity Tolerance...(IEC 393).. Electrical angle..........(Smaller angles optional) Resistance taps(Current / voltage type - optional ) Resolution................ Temperature Coefficient of Resistance(TCR)....... Power Rating @ 70°C................ Insulation Resistance @ 500 Vdc...... Dielectric Strength @ 50 Hz........... Maximum Wiper current.............. short time wiper current 10 sec. End voltage as a % of applied voltage UNITS VALUE -Ohms ±% ±% Conductive Plastic 1k,2k,5k,10k(other value up to 100k) 20 10 ±% 2.0 ±% Degrees --- 0.5 340° ±5° Min.4° wide for Current tap Essentially infinite ppm/deg C Watts M Ohms V ac mAmps mAmps ±400 1.0 1000 % Less than 0.5 Degrees -Nmm Oz inch Nmm Oz inch m.m N.m. m.m.(Inch) m.m.(Inch) 360° Sleeve 5 (0.708) 4 (0.566) 14.00 m.m. 500 1 10 MECHANICAL CHARACTERISTICS :-5 4 (Optional) Rotation (Mechanical Angle) Continuous Bearing Type.......... Torque... Starting............. (0.1968) 2.75 0.86 3 1 (0.1082) (0.0338) 3 CCW 1 CW 2 3.00 4 Spanner size of nut Nut tightning Torque..... Axial play Radial play (0.1181) 2.93 2 Electrical Shematic Diagram Torque... Running............. (0.1153) 0.8 N.m. 0.2 (0.00787) max 0.2 (0.00787) max ENVIRONMENTAL CHARACTERISTICS :-- Rear side view Operating Temperature............. ROHS compliance Degrees C -- -40 to +105 Yes Nos. 5,000,000 ----- Aluminium with black Anodized Stainless Steel Brass, gold plated PERFORMANCE :-Rotational Life (shaft Revolutions)..... Uni-Automation (I) Pvt Ltd Tel/Fax:+91-20-24440890 www.uniautomation.com FIRST ISSUE : 07/05/2015 TOLERENCES SCALE:- 1:1 UAPL PART NO DIN-ISO 2768-1 (1991-06) (TOLERANCE CLASS-MEDIUM) 129325 CONDUCTIVE PLASTIC POTENTIOMETER NP22 CUSTOMER DRAWING REF NO NA CUSTOMER : UAPL STANDARD REV - 00 SHEET 1of1 MATERIALS OF CONSTRUCTION:-Housing....... Shaft........ Terminals........... Mounting Hardware .... Lock Washer-steel + Nut-Brass, A/F 14 X 3 mm,both Nickel plated Soldering Recommendation :- Use soldering Iron at 350° C for 3 second maximum. Clean the soldered pads with Isopropyl alcohol after soldering. Continuous improvements are being made for enhancing performance for customer benefit in product design & process.The product supplied may be slightly different than described by above specifications