IOP32D SURGE DIVERTER
Digital I/O and Analog Power Surge Protection
Specifications
Parameters
Wires/Loops Protected
4 Wires/2 Loops
Nominal Voltage
32V
Rated Voltage (MCOV)
36V
Nominal Working Current
675mA
Nom/Max Discharge Current
3kA/20kA (8/20uS)
Lightning Impulse Current
2.5kA (10/350uS)
Residual V @ Nom Discharge
45V
Voltage Protection @ 1kV/us
<38V
Response Time
<1ns
Description
Bandwidth
<-0.3dB: <1MHz; -3dB: 6.5MHz
The IOP32D Surge Diverter is designed to protect both digital and analog
input and outputs from the impact of surge in-rush currents.
Series Resistance
2 Ohms (4 Ohms per Loop)
Leakage Current
<1uA @ Working Voltage
This surge diverter is ATEX certified for use in potentially explosive
atmospheres having removable terminals for ease of commissioning.
Note: Surge Protection Devices rely on good earth grounding practices to be
effective. This product assumes both a metallic enclosure and good ground
connection to the enclosure. If in doubt, apply another earth ground under the
locknut to create a sufficient earth ground.
Warning: Do not stand near or touch operating equipment during an electrical
storm as the IOP32D will not protect personnel.
General
Size
13mm x 105mm x 85mm (0.5” x 4.1” x 3.3”)
Housing
IP20
Mounting
T-section DIN Rail 35mm x 15mm (1.4” x 0.6”)
Terminal Blocks
2.5mm2 (12 AWG)
Safety
EN 60950
Hazardous Area
ATEX EEx ia IIC T4
Temperature
-40 to 70°C (-40 to 158°F)
Humidity
5 to 95% Non-condensing
Weight
140g (5oz)
Note: Specifications subject to change.
Ordering
To order, select product code from the table and specify country of application.
Product Code
Description
IOP32D
Signal Surge Diverter
Product Compatibility
Please refer to product datasheets for compatibility details to suit your application.
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product
data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper
Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
©2013 Cooper Bussmann
www.cooperbussmann.com/wireless
0913
BU-SB13110
Page 1 of 1
Datasheet: 7961