PS-DINAC-12DC-OK Power Supply Universal Power Supply for Industrial Applications Specifications Input/Output Input 85 - 264Vac, 47 - 63Hz/120 - 370Vdc Output 12Vdc, 5Adc DC OK Signal Relay 30V/1A Compliance Safety UL 508, UL 60950-1, NEC Class 2 EMC EN55022, EN61204-3 Class B, EN61000-3-2/3 Immunity EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61000-6-2, EN61204-3 General Temperature -20 to +70°C (-4 to +158°F) Description Humidity 20 - 90% Non-condensing The PS-DINAC-12DC-OK is a DIN rail mounted 12Vdc power supply, compatible worldwide with universal 85 - 264Vac input and compliance. Vibration IEC 60068-2-6 Mounting T-section DIN Rail 35/7.5 or 15mm (0.59’) Weight 0.33kg (0.72lbs) Dimensions 40mm x 90mm x 100mm (1.57’ x 3.54’ x 3.93’) DC OK signal is provided which can be used to indicate AC or power supply failure. Note: Can be used on 5W licensed units without a battery. Note: Specifications subject to change. Ordering To order, select product code from the table and specify country of application. Product Code Description PS-DINAC-12DC-OK DIN Rail Power Supply - 85 - 264Vac, 12Vdc/5A Product Compatibility The following products are compatible with this accessory. Please refer to product datasheets for compatibility details to suit your application. Product Code Description Data Sheet # MA15D1SI Power Supply Surge Diverter - 110Vac/15A 7936 MA15D2SI Power Supply Surge Diverter - 240Vac/15A 7936 The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. ©2013 Cooper Bussmann www.cooperbussmann.com/wireless 0313 BU-SB13105 Page 1 of 1 Datasheet: 7935