PS-DINAC-24DC-OK Power supply
Universal Power Supply for Simple Commissioning
Specifications
Input/Output
Input
85 - 264Vac, 50 - 60Hz
Output
24Vdc, 2.5Adc
DC OK Signal Relay
30V/1A
Compliance
Safety
UL 508, UL 60950-1, NEC Class 2
EMC
EN55022, EN61204-3 Class B, EN61000-3-2/3
Immunity
EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61000-6-2, EN61204-3
General
Temperature
-20 to +70°C (-4 to +158°F)
Description
Humidity
20 - 90% non-condensing
The PS-DINAC-24DC-OK Power Supply is a DIN rail mounted power supply,
compatible worldwide with universal 85 - 264Vac input and compliance.
Vibration
IEC 60068-2-6
Mounting
T-section DIN rail 35/7.5 or 15mm (0.59’)
Weight
0.33kg (0.72lbs)
Dimensions
40mm x 90mm x 100mm (1.57’ x 3.54’ x 3.93’)
Note: When using this product with 5W licensed units a battery connection to
the wireless unit is required (providing transmitter in-rush current). Connect
the power supply to the +24 supply terminals on the unit.
Note: Specifications subject to change.
Ordering
To order, select product code from the table and specify country of application.
Product Code
Description
PS-DINAC-24DC-OK
DIN Rail Power Supply - 85 - 264Vac, 24Vdc/2.5A
Product Compatibility
The following products are compatible with this accessory. Please refer to
product datasheets for compatibility details to suit your application.
Product Code
Description
Data Sheet #
MA15D1SI
Power Supply Surge Diverter - 110Vac/15A
7936
MA15D2SI Power Supply Surge Diverter - 240Vac/15A
7936
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product
data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper
Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
©2013 Cooper Bussmann
www.cooperbussmann.com/wireless
0313
BU-SB13106
Page 1 of 1
Datasheet: 7958