DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable
for downlighting and accent applications. Utilizes PAR30 Metal Halide
lamps.
Catalog #
Type
Project
Comments
For new construction applications. Insulation must be kept 3” from all
sides and at least 1” above the housing.
Date
Prepared by
SPECIFICATION FEATURES
Housing
All steel construction. Housing includes
perforated mesh bottom surface for trimless
installation in drywall/plaster ceilings by
allowing the ceiling’s mudding compound
to be applied right up to the edge of the
fixture opening. Includes beveled “knifeedge” lip to ensure a clean edge. Housings
can accommodate 0.50” or 0.625” ceiling
thickness.
System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
Junction Box
Junction box is UL listed for through branch
wiring, (access above ceiling not required)
for 8 #12, 90°C supply conductors. J-Box
integrated with housing and is accessible
through the ceiling opening.
Electrical
Integral electronic metal halide ballasts.
Ballasts and electrical are accessible
through removable doors on the housing
sidewall.
Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Lamps
One, two, three, four, five, or six PAR30
Metal Halide lamps mounted in adjustable
bezels. Each lamp can accept up to two
optical accessories. Special LV style
lampholder with 380º x 45º locking lamp
adjustment. Locking horizontal positional
adjustment can be achieved for added
versatility and aiming. Medium base sockets
pre-wired in housing.
COMBOLIGHT®
LV SERIES
Recessed Multi-Lamp
Fixture
Ceiling Cut-Outs
CV1 = 10.00” x 10.00”
CV2 = 10.00” x 17.00”
CV3 = 10.00” x 24.00”
CV4 = 10.00” x 31.00”
CV5 = 10.00” x 38.00”
CV6 = 10.00” x 45.00”
CVX = 17.00” x 17.00”
1, 2, 3, 4, 5, or 6 Light
PAR30 Metal Halide
New Construction
Trimless Housing
Mounting
Butterfly Brackets accept 1/2” EMT, C
Channel, Tbar fasteners, and bar hangers.
Four tabs on housing for securing to
structure.
E
A
8.78”
223mm
F
Dimensions in inches / mm
Config.
CV1
B
C
A
B
C
D
E
F
15.86” 12.77” 7.00” 7.00” 14.61” 12.81”
403
324
178
178
371
325
CV2
22.86” 19.81” 14.00” 7.00” 14.61” 12.81”
581
503
356
178
371
325
CV3
29.82” 26.82” 21.00” 7.00” 14.61” 12.81”
757
681
533
178
371
325
CV4
36.86” 33.82” 28.00” 7.00” 14.61” 12.81”
936
859
711
178
371
325
CV5
43.86” 40.82” 35.00” 7.00” 14.61” 12.81”
1114 1037 889
178
371
325
CV6
50.86” 47.82” 42.00” 7.00” 14.61” 12.81”
1291 1215 1066 178
371
325
CVX
22.86” 19.81” 14.00” 14.00” 23.40” 19.81”
581
503
356
356
594
503
7.00”
178mm
Trimless Installation
D
380º x 45º Adjust +
Horizontal Travel
Thermal
Protector
Integral Metal Halide Ballasts
ORDERING INFORMATION
N
Configuration
CV1 = One (1) Light
CV2 = Two (2) Light
CV3 = Three (3) Light
CV4 = Four (4) Light
CV5 = Five (5) Light
CV6 = Six (6) Light
CVX = Four (4) Light Sq.
www.cooperlighting.com
E
Housing
N = New Construction
Lamp Type / Wattage Label
039M30 = 39 Watt PAR30MH
070M30 = 70 Watt PAR30MH
Power Supply
E = Electronic Metal Halide
Ballasts
N
Power Supply Voltage
1 = 120V
2 = 277V
4 = 240V
Housing Interior Finish
W = White
B = Black
S = Industrial Silver
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Trim Style
N = Trimless
rev 021012