PORTFOLIO TM
D ES C R IPTION
Low brightness 6-inch aperture reflector for use with 26W or 32W Triple
Twin Tube 4-pin lamps for below ceiling installation. The precisely
formed non-imaging reflector ensures 55° cutoff to lamp and lamp image
and the one piece design eliminates light leaks at the ceiling. Standard
features include low iridescent finish on all reflector colors to eliminate
"rainbowing". One electronic ballast operates 26W and 32W triple lamps.
Venting ensures maximum lamp life and lumen output. Adjustable socket
locks lamp into optimal position and cannot be disturbed by normal
maintenance. Medium beam, wide beam, lensed, and open wall wash
reflectors are interchangeable within the same housing.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Re f l e c t o r
Hous i ng Cons t ru ction
Electron ic B allast
.050 thick aluminum, in a one
piece spun macrofocal parabolic
contour. Available in a variety of
Alzak® finishes. Positive reflector
mounting pulls trim tight to ceiling.
Galvanized steel plaster ring
accommodates up to 1" ceiling
thickness.
Electronic ballast provides full
light output and rated lamp life.
Provides flicker free and noise free
operation and starting. End of lamp
life protection is standard.
Condui t F i tti ngs
Die cast screw tight connectors.
Trim Ring Options
Labels
Self flanged or molded white trim
ring. Rimless trim ring accessories
available.
Soc ke t
cULus listed, standard damp label.
4 pin GX24q-3 base with fatigue
free stainless steel lamp spring
ensures positive lamp retention.
So c k e t C o n n e c t or
One piece vented and finned die
cast aluminum cap for maximum
thermal performance.
C6RV042
C6IV042
6050/6051
26W or 32W
TTT or PLT
Compact Fluorescent
STEPREPEAT>
8-3/16"
[224mm]
6-Inch Remodel/International
Vertical Open Downlight
8-3/16"
[224mm]
Adjustable
ENERGY DATA
26W TTT 4-pin
Ballast: Electronic
5-11/16 " [145mm]
5-11/16 " [145mm]
6-3/8" [162mm]
6-3/8" [162mm]
REMODEL
Line Amps: 0.25
277V Input Watts: 26
Line Amps: 0.09
Power Factor: >0.99
THD: <90%
Min. Starting Temperature: -10°C (15°F)
IN T E R N A T I O N AL
7" [178mm]
7" [178mm]
120V Input Watts: 29
Sound Rating: Class A Standards
32W TTT 4-pin
Ballast: Electronic
11-1/4"
[287mm]
11-1/4"
[287mm]
120V Input Watts: 36
Line Amps: 0.32
277V Input Watts: 36
Line Amps: 0.16
Power Factor: >0.99
THD: <10%
Min. Starting Temperature: -10°C (10°F)
Sound Rating: Class A Standards
NOTES: Accessories should be ordered separately. For additional
options, please consult your Cooper Lighting Representative.
Alzak is a registered trademark of Aluminum Company of
America.
12-3/8 [316mm]
Adjustable
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADP110876
2014-08-18 09:14:31
ORDER ING INFOR M A TION
C6RV042 C6IV042 6050/6051
EXAMPLE: C6RV042ECP 6051LI WF=6" CFL Vertical Wide Beam Remodel Downlight, (1) 26/32 Watt TTT lamp with 120/277 Volt, Chicago Plenum, Self Flanged with Specular Clear Finish
Housing
Ballast
Options
EM=Emergency Module
E=120/277V 50/60 Hz Electronic
with RemoteTest Switch
3E=347V 50/60 Hz Electronic
D5LT26=26W 120-277V Fifth Light
(DALI Dimming)
D5LT32=32W 120-277V Fifth Light
(DALI Dimming)
3D5LT26/32=26W 347V Fifth Light
(DALI Dimming)
D26/32=26 or 32W 120-277V Dimming Lutron
EcoSystem/3-Wire Control (Factory Wired for 3-Wire)
EDR26=DeRated Wattage Label, 26W
EDR32=DeRated Wattage Label, 32W
D26MARKVII=26W 120-277V Advance MARK7
D32MARKVII=32W 120-277V Advance MARK7
1D26MARKX=26W 120V Advance MARK 10
1D32MARKX=32W 120V Advance MARK 10
2D26MARKX=26W 277V Advance MARK 10
2D32MARKX=32W 277V Advance MARK 10
C6RV042=6" CFL
Vertical
Remodel,
(1) 26W TTT
(1) 32W TTT or PLT
C6IV042=6"
CFL Vertical
International,
(1) 26W TTT
(1) 32W TTT or PLT
R e fl e c to r
6051=Wide Beam
Downlight Reflector,
Self Flanged
6050=Wide Beam
Downlight Reflector,
Polymer Trim Ring
Options
Finish
LI=Specular Clear
H=Semi-Specular
Clear
WMH=Warm Haze
G=Specular Gold
WH=Wheat
W=Gloss White
GP=Graphite
GPH=Graphite Haze
B=Specular Black
W=Gloss White
WF=White
painted
Flange (Self
Flanged only)
A c c e s s o ri e s
TRM6=Metal Trim
Ring, Specify Finish 1
TRR6=Rimless Trim
Ring, White 1
FK5= 5 Amp Field
Installable Fuse Kit
300V Max
DT6=Deco trim 1
ABR6P=Remodel
Adaptor Ring for 7˝ OD
ABR7P=Remodel
Adaptor Ring for 8˝ OD
ABR8P=Remodel
Adaptor Ring for 9˝ OD
Notes: 1 Order trim with polymer trim ring
(Consult specification sheet for ordering information and options).
PH OTOM ETR IC S
Candlepower Distribution Curve
Downlight
80°
150
70°
300
60°
450
50°
600
40°
750
900
10°
20°
Zonal Lumen Summary
Test No. H22186
C6RV042 6050LI
Lamp = 32W TTT
Lumens = 2400
Spacing Criterion = 1.2
Efficiency = 54.0%
Cone of Light
Distance
Fixture to
Lighted Plane
Initial
Footcandles
at Nadir
Beam
Diameter
5'6"
6'6"
8'0"
10'0"
12'0"
14'0"
26
19
12
8
5
4
6'6"
7'6"
9'6"
12'0"
14'0"
16'6"
30°
80°
100
70°
200
60°
300
50°
400
40°
500
600
10°
20°
30°
Lumens
598
940
1291
1296
0
1296
%Fixture
46.2
72.6
99.6
100.0
0.0
100.0
Test No. H22195
C6RV042 6050LI
Lamp = 32W PLT
Lumens = 2400
Spacing Criterion = 1.3
Efficiency = 47.0%
Cone of Light
Distance
Fixture to
Lighted Plane
Initial
Footcandles
at Nadir
Beam
Diameter
5'6"
6'6"
8'0"
10'0"
12'0"
14'0"
18
13
9
5
4
3
7'6"
9'0"
11'0"
13'6"
16'6"
19'0"
Degrees
Vertical
45
55
65
75
85
CD/SQ M
29109
11070
562
0
0
Beam diameter is to 50% of maximum footcandles,
rounded to the nearest half-foot.
Footcandle values are initial, apply appropriate
light loss factors where necessary.
26W PLT = .82
Zone
0-30
0-40
0-60
0-90
90-180
0-180
Lumens
482
777
1124
1129
0
1129
CD
783
796
741
676
550
338
104
0
0
0
0
Candela Distribution
Luminance
%Fixture
42.7
68.9
99.6
100.0
0.0
100.0
Degrees
Vertical
45
55
65
75
85
CD/SQ M
28429
11378
548
0
0
Beam diameter is to 50% of maximum footcandles,
rounded to the nearest half-foot.
Footcandle values are initial, apply appropriate
light loss factors where necessary.
26W PLT = .94
Degrees
Vertical
0
5
15
25
35
45
55
65
75
85
90
EM Multiplier:
(in emergency mode):
EM = .28
Zonal Lumen Summary
Candlepower Distribution Curve
Downlight
Zone
0-30
0-40
0-60
0-90
90-180
0-180
Candela Distribution
Luminance
Degrees
Vertical
0
5
15
25
35
45
55
65
75
85
90
CD
546
561
588
568
475
330
107
4
0
0
0
EM Multiplier:
(in emergency mode):
EM = .28
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADP110876
2014-08-18 09:14:31