PORTFOLIO TM
D ES C R IPTION
Low brightness 4-1/2-inch aperture reflector for use with 18W and 26W
compact fluorescent lamps for below ceiling installation. The precisely
formed non-imaging reflector ensures 55° cutoff to lamp and lamp image
and the one piece design eliminates light leaks at the ceiling. Standard
features include low iridescent finish on all reflector colors to eliminate
"rainbowing" and venting to ensure maximum lamp life and lumen
output. The fixture optics offer unparalleled performance in glare free
lighting providing a smooth beam devoid of hot spots. Open downlight,
lens, and open wall wash trims are interchangeable within the same
housing.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Re f l e c t o r
Hous i ng Cons t ru ction
.050 thick aluminum in a one
piece spun macrofocal parabolic
contour. Available in a variety of
Alzak® finishes. Positive reflector
mounting pulls trim tight to ceiling.
Galvanized steel plaster ring
accommodates up to 1" ceiling
thickness.
Provides flicker free and noise free
operation and starting. End of lamp
life protection is standard.
Labels
cULus listed, standard damp label.
Condui t F i tti ngs
Die cast screw tight connectors.
Trim Ring Options
Self flanged or molded white trim
ring. Rimless or metal trim ring
accessories available.
So c k e t C o n n e c t or
One piece vented and finned die
cast aluminum cap for maximum
thermal performance.
Soc ke t
4-pin 18W GX24q2 or 26W GX24q3
base with fatigue free stainless
steel lamp spring ensures positive
lamp retention.
C4RV or C4IV
4050/4051
El e c troni c Ba l last
Electronic ballast provides full
light output and rated lamp life.
18W, 26W TTT
Compact Fluorescent
STEPREPEAT>
4-Inch Remodel/International
Vertical Open Downlight
7-3/4"
[196mm]
7-3/4"
[196mm]
ENERGY DATA
(2) 18W TTT 4-pin
Ballast: Electronic
Adjustable
4-1/2" [116mm]
5-1/8" [130mm]
5-3/4" [146mm]
4-1/2" [116mm]
5-1/8" [130mm]
5-3/4" [146mm]
REMODEL
120V Input Watts: 29
Line Amps: 0.25
277V Input Watts: 26
Line Amps: 0.09
Power Factor: >0.99
THD: <90%
Min. Starting Temperature: -10°C (15°F)
Sound Rating: Class A Standards
INTERNATIONAL
26W TTT 4-pin
Ballast: Electronic
120V Input Watts: 29
Line Amps: 0.25
277V Input Watts: 26
Line Amps: 0.09
Power Factor: >0.99
THD: <90%
Min. Starting Temperature: -10°C (15°F)
Sound Rating: Class A Standards
10"
[254mm]
11-3/8" [290mm]
10"
[254mm]
NOTES: Accessories should be ordered separately. For additional
options, please consult your Cooper Lighting Representative.
Alzak is a registered trademark of Aluminum Company of
America.
Adjustable
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADP110868
2014-07-24 11:28:00
ORDER IN G INFOR M A TION
C4RV or C4IV 4050/4051
EXAMPLE: C4RV018ECP 4051LI WF=4" CFL Vertical Remodel Downlight, 18 Watt Triple Tube 120/277 Volt, Chicago Plenum, Self Flanged with Specular Clear Finish
Housing
Wa tt a ge
Ballast
Options
EM=Emergency
E=120/277V 50/60
Module with
Hz Electronic
Remote
3E=347V 50/60 Hz
Test Switch
Electronic
D5LT=120-277V Fifth
Light (DALI Dimming)
3D5LT=347V Fifth Light
(DALI Dimming) (26W only)
D=120-277V Dimming
Lutron EcoSystem/
3-Wire Control (Factory
Wired for 3-Wire)
DMARKVII=18W or 26W
120-277V Advance MARK 7
1DMARKX=18W or 26W
120V Advance MARK 10
2DMARKX=18W or 26W
277V Advance MARK 10
C4RV0=4" CFL
Vertical Remodel
C4RIV0=4" CFL
Vertical International
18=18W TTT
26=26W TTT
R e fl e c t o r
4051=Downlight
Reflector, Self Flanged
4050=Downlight
Reflector,
Polymer Trim Ring
Finish
LI=Specular Clear
H=Semi-Specular
Clear
WMH=Warm Haze
G=Specular Gold
WH=Wheat
WHH=Wheat Haze
GP=Graphite
GPH=Graphite Haze
B=Specular Black
W=Gloss White
Options
WF=White painted
flange (self flanged
only)
A c c e s s o ri e s
TRM4=Metal Trim
Ring, Specify Finish 1
TRR4=Rimless Trim
Ring
FK5=5 Amp Field
Installable Fuse Kit
300V Max
Notes: 1 Order trim with polymer trim ring
(Consult specification sheet for ordering information and options).
PH OTOM ETR IC S
Cone of Light
Candlepower Distribution Curve
Downlight
80°
70°
140
60°
50°
280
420
Test No. H21333
C4026 4050LI
Lamp = 26W TTT
Spacing Criterion = 1.4
Efficiency = 50.6%
Distance
Fixture to
Lighted Plane
Initial
Footcandles
at Nadir
Beam
Diameter
4'0"
6'0"
7'6"
8'0"
10'0"
25
11
7
6
4
5'6"
8'0"
10'0"
11'0"
13'6"
40°
10°
20°
30°
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADP110868
2014-07-24 11:28:00