Catalog # Type

advertisement
CORELITE
DESCRIPTION
The Corelite Class R2R Retrofit is designed to replace the core "lighting
engine" of dated and inefficient recessed luminaires, while leaving the
existing metal luminaire body intact. The total watts per luminaire can be
reduced between 30 and 40 percent while improving the overall lighting
quality and visual character of the interior space. The Class R2R is extremely
low in profile with a 3" overall height, allowing for retrofit of shallow 3"
lensed troffers. In addition to the energy cost reduction and improved
lighting conditions, the Class R2R's 80%+ luminaire efficiency meets the
requirements of many major rebate programs across the US.
Type
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
Construction
Three-piece retrofit assembly
consists of a ballast/bracket
assembly, reflector and lens.
Ballast/bracket assembly and
reflector each have captive
zinc-plated self-drilling hardware.
Mounting brackets are pre-paint
white 20-gauge die-formed steel.
Reflector is one piece die-formed
aluminum with a matte white
powder coat painted finish. Ballast
is pre-wired to factory installed
sockets on each mounting bracket
with the ballast/bracket assembly.
3" low-profile assembly will retrofit
into both parabolics and troffers.
Finish
Reflector is matte white powder
coat painted finish. Ballast brackets
are pre-paint white with white
semi-gloss finish.
Electrical
Ballast is fully tested and pre-wired
to factory installed sockets within
the ballast/bracket assembly, and
comes with captive self-drilling
hardware and integral quick
disconnects. T5/T5HO fixtures use
UL listed Class P, T5/T5HO
program rapid start universal
voltage electronic ballasts, with
pre-installed quick disconnect.
Standard Ballast Factor of 1.0 and
Power Factor of 98%.
Mounting
First, existing lamps, reflectors,
lenses, ballast covers, ballast and
socket trays must be removed
from existing luminaire. Next, the
ballast/bracket assembly is
installed by first mounting the
ballast to the top of the existing
luminaire, then by attaching the
mounting brackets. The reflector
then mounts to the ballast/bracket
assembly, and finally lamps and
lenses are installed.
Shielding
Luminaire lens is UV resistant
acrylic with an optically designed
prism structure, which diffuses
lamp image and provides high
light transmission and luminaire
efficiency (80%+).
NOTE: Fit Compatibility
Retrofit kit fits most troffers. The
end-user is responsible for
verifying fit. Therefore, a sample
kit is highly recommended.
CLASS R2R
Retrofit
Lensed
3T5
3T5HO
2'x2' Recessed Retrofit
Existing Recessed Luminiare*
3-1/8”
[79mm]
min
3”
[76mm]
24”
[610mm]
ORDERING INFORMATION
Sample Number: R2R-WL-3T5-1C-UNV-22-T1
Series
R2R=Class R2R
Retrofit
Reflector
W=White
Shielding
L=Linear Prismatic Lens
Number of Lamps
3=3 Lamps
Lamp Type
N5=T5 Normal Output
T5=T5 High Output
Number of
Circuits
1=1 Circuit
1
2=2 Circuits
Wiring 1
C=Standard Circuit
Voltage 1
120=120V
D=Dimming / Step
Dimming
277=277V
347=347V
E=Emergency
T=Nightlight
Size
22=2' x 2'
Ceiling Type
T1=1" Grid2
UNV=Universal
(120V-277V)
Y=Daylight
Notes: 1
2
Not all options available. Please consult your Cooper Lighting Representative for
availability.
Ceiling Type T1 is for flush ceilings only. Consult factory for all other ceiling types.
Specifications and Dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADE100074
09/26/2012 1:55:54 PM
Corelite
PHOTOMETRICS
Coeffici ents o f U tili zatio n
rc
rw
Effective floor cavity reflectance
80%
70%
70 50 30 10
70 50 30
RCR
0
R2R-WL-1N5 2x2
(1) F14/835
1350 Lumens
Cand ela
20%
10
50%
50 30 10
30%
50 30 10
10%
50 30 10
0%
0
109 109 109 109
106 106 106 106
102 102 102
97
97
97
93
93
93
91
1
2
98
88
93
80
89
73
84
67
95
86
91
78
87
72
83
67
87
75
84
70
80
65
83
72
81
67
78
63
80
69
78
65
76
62
74
60
3
4
5
6
80
73
67
62
70
61
55
49
62
53
46
41
55
46
40
34
78
71
65
60
68
60
54
48
61
52
45
40
55
46
39
34
65
58
52
46
59
51
44
39
54
45
39
34
63
56
50
45
57
50
34
38
53
45
38
34
60
54
48
43
56
48
42
338
52
44
38
33
50
42
36
31
7
8
9
10
57
53
50
47
44
40
37
34
36
32
29
27
30
27
24
22
56
52
48
45
44
40
37
34
36
32
29
27
30
27
24
22
42
39
35
33
35
32
29
26
30
27
24
22
41
37
34
32
34
31
28
26
30
26
24
22
40
36
34
31
34
31
28
25
29
26
24
21
27
24
22
20
Angle
0
Along II
379
o
45
379
Across I
379
5
10
380
374
379
375
378
376
15
20
365
352
368
359
371
366
25
30
35
40
335
314
289
261
346
329
310
288
356
345
331
316
45
50
55
60
233
203
174
145
265
240
216
190
300
282
263
245
65
70
75
80
116
88
63
39
165
142
117
87
226
205
178
141
85
90
18
0
45
0
75
0
Efficiency 91.4%
Test Report
#P30236
Zona l Lume n S umma r y
Lu mi nance D ata
Zone
0-30
Lumens
299
%Lamp
22.2
%Fixture
24.3
Angle
in Deg
0-Deg
cd/sm
45-Deg
cd/sm
90-Deg
cd/sm
0-40
0-60
0-90
493
893
1234
36.6
66.1
91.4
40.0
72.4
100.0
45
55
65
886
816
738
1008
1012
1050
1141
1233
1438
40-90
60-90
90-180
0-180
741
341
0
1234
54.8
25.3
0
91.4
60.0
27.6
0
100.0
75
85
654
555
1215
1388
1849
2313
FIT COMPATIBILITY GUIDELINES
The Class R2R is an extremely low profile retrofit design and will fit the majority of existing lensed troffers and louvered parabolics. However, Corelite cannot guarantee
fit with every existing luminaire – fit confirmation is therefore the responsibility of the end-user. For best results, contact your local representative for a sample or trial
installation prior to ordering.
CROSS SECTION
END SECTION
24”
[610mm]
Typical Existing
Recessed Housing
Various Housing
Mounting
Bracket
3”
[76mm]
3”
[76mm]
2-1/4”
[57mm]
22-1/4”
[565mm]
23-7/8”
[606mm]
1”
[26mm]
Existing Luminaire
Ballast-Bracket
Assembly
Lamps
(Optional)
Lens
Specifications and Dimensions subject to change without notice.
Corelite • 18001 E. Colfax Ave. • Aurora, CO 80011 • 303.393.1522 • FAX 303.393.1477
ADE100074
09/26/2012 1:55:54 PM
Download