Technical Data TD450019EN Effective December 2015 Supersedes May 2015 IPC IPC-8000 IPC-8001 HPSA-IPC-KIT IP Communicator Description The WAVES over IP (WoIP) Mass Notification System (MNS), part of the ALERiTY integrated platform, is comprised of a collection of secure, robust and reliable Ethernet communication devices, IP Communicators (IPC). Wired directly to a LAN or through its own private network, the IPC sends audible, visual and data messages via an RTP multicast stream. It provides wired connections between IPCs and/or Ethernet wireless devices (RADIO-900M). The IPC complies with relevant IEEE 802.11 standards. IPC Each IPC unit receives and transmits signals from the LAN to and from the IPC located at the WoIP Integrated Base Station (IBS) and other IPC units within the network. Each IPC unit has a unique address in the WAVES over IP network, and is individually software controlled from the IBS. Up to 500 IPC units can be individually addressed. The IPC includes three digital input circuits and three commandable relays (Normally Opened, Normally Closed). There are built-in drivers for Power Out (aux power)/Line-level Audio In/Out/2 x 15 Watt Amplifier Out. The IPC also offers 15 VDC isolated output. The IPC provides supervision and monitoring at end nodes. Each IPC unit conducts supervisory built-in self-tests (BIT) that are reported periodically or on-demand to the WoIP IBS where they are displayed and logged. Changes in supervised variables trigger active conditions at the IBS and can be further programmed to initiate messaging events throughout the system. The IPC is housed in an extruded aluminum enclosure. It mounts easily to an included back plate. The IPC unit is powered from either AC or DC power sources. An optional battery backup unit (UPS-901) can provide up to five hours of operation. The IPC supports the highest network security standards with encryption 256-bit AES and features dynamic role-based password protection. Technical Data TD450019EN Effective December 2015 Features & benefits IPC connector panels • End-to-end IP communications network for site-wide communications • LAN-based device that can reside on either an organization’s current network infrastructure or on its own private network • RS-232 • RTP and RTCP for audio and transmission • Each IPC unit has a unique address and is individually software-controlled from the IBS • Three digital inputs and three commandable relays • Built in: Power Out/Line-level Audio In/Out/2 x 15 Watt Amplifier Out; 15 VDC isolated output • Supervision and monitoring with auto-diagnostics; online network diagnostics and configuration • Supervised system heart beat—system devices continuously send status • Remotely upload upgrades from main server to IPCs • Highest security level—encryption 256-bit AES • Built-in 4-port Ethernet switch for connecting accessories (i.e., RADIO-900M) • Dynamic role-based password protected environment • Protocols Supported: RTP runs on UDP; TCP/IP for file downloads, set up only • Universal WAVES interface built in to integrate with other systems, including Fire Alarm Control Panels, paging systems and other notification systems Top View Advanced Protocol Interface available for bidirectional interoperability with other life safety and communication systems • Wireless communications available with the addition of the RADIO-900M PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS. • 2 The IPC, IPC-8000 and IPC-8001 all have TÜV certification: UL/CSA/EN 60950-1 EATON www.eaton.com IPC IPC-8000 (Wall-mount) . WARNING Approvals Bottom View IPC models • NNote: All CAUTIONS and WARNINGS are identified by the symbol All warnings are printed in bold capital letters. IPC IPC-8000 IPC-8001 HPSA-IPC-KIT IPC-8001 (Desktop or rack-mount for IBS-0331 hybrid systems) Technical Data TD450019EN IPC IPC-8000 IPC-8001 HPSA-IPC-KIT Effective December 2015 Table 1. Product features Ethernet Specifications Switch Connector Network Requirements Infrastructure Standards Cable Length Connectors RS-232 Interface Line-level Audio/Digital Inputs Speaker-level Audio AC Input Connector DC Input Connector Ethernet Port Standard Relays Connection Contact Voltage Current (resistive only) Controls (internal to the unit, adjusted remotely from IBS) Audio Gain Audio Mute RS-232 Serial Data Format Data Rate (configurable) Max Cable Length Discrete Input Three TTL level logic (hi/lo), programmable as input Diagnostics Power/Sync Reported Diagnostics Ethernet Port Indication General Size Housing Operating Temperature a Storage Temperature a Humidity, Non-condensing a Weight Electrical AC Input Power Consumption DC Input Backup Power (optional) Audio Output Output Levels Output Impedance Frequency Response THD Amplifier Protection 3 EATON www.eaton.com 4-port 10/100 Base-T RJ-45, quantity 4 identical ports available, power limited, non-supervised Flat network or infrastructure to transmit RTP or support multi-cast streams to get over hierarchy network Must meet IEEE standards 330 ft max/100 M between nodes DSub - 9 Pin, Male 3.5 mm, 11 pin socket 3.81 mm, 5-pin socket. Standard 3-pin (fused) 5-pin DIN connects to UPS-901 or other DC Source 10/ 100 Base-T; 4 x RJ45 - IEEE 802.3 3.5 mm 10 pin socket NO or NC configurable 30 VDC max 1 Amp max Tone and Voice Channels Tone and Voice Channels Full duplex RS-232 8 data bits, 1 stop bit, no parity Up to 57.6 kbps 20 ft/6.1 m LED Indicators: White - Powering up; Green - Online; Red - Offline Connectivity information/statistics. System Log file. Link/Speed - Green = 100 mbps; Yellow blink = Activity IPC: 8.5 x 8.6 x 3.25 in/21.6 x 21.9 x 8.26 cm IPC-8000: 17 H x 15 W x 5.5 D in/ 43.8 x 38.1 x 13.97cm IPC-8001: 7 H x 17 W x 22 D in/20.3 x 43 x 62.4 cm IPC: Silver; Anodized extruded aluminum IPC-8000/IPC/8001: 32 to 120°F (0 to 49°C); IPC located in HPSA: -40 to +140°F (-40 to +60°C) IPC-8000/IPC/8001: -14 to 140°F (-10 to 60°C); IPC located in HPSA: -40 to +158°F (-40 to +70°C) 10 to 93% RH @ 90°F (32°C) IPC: 6.4 lbs/2.9 kg IPC-8000: 12 lbs/44 kg IPC-8001: 40 lbs/22 kg IPC: 110 - 240 VAC, 50 - 60 Hz; IPC-8000/IPC/8001: 100-240 VAC, 50-60 Hz, 120W 3W (Standby) 12-16 VDC, 70W UPS rechargeable battery backup (UPS-901) optional for IPC-8000; UPS-914 (110 VAC) or UPS-914 (220 VAC) battery backup optional for IPC-8001 Amps A&B: 15 WRMS each into 4 ohms with 52dB overall gain report, 1 dB resolution Line A&B: +dBv with 55dB overall gain control, 1dB resolution Amps: 4-16 ohms per channel; Line-level: 600 ohms per channel 100 Hz– 7.2 KHz < 1.0% Short, thermal and overload Technical Data TD450019EN IPC IPC-8000 IPC-8001 HPSA-IPC-KIT Effective December 2015 Isolated Output Voltage Current Isolation Ordering Information IPC IPC-8000 IPC-8001 HPSA-IPC-KIT Supporting Equipment & Accessories b RADIO-900M UPS-901 HPSA-8100-R Series ACU-8411 15 VDC 1 Amp 2250 VDC Line replacement unit only for IBS-8431, IPC-8000, IPC-8001, HPSA-8100 Series, ACU-8411 Includes 1 IPC in a wall-mount enclosure Includes 2 IPCs in a desktop enclosure that can be rack-mounted with IBS-RM-KIT. Only available for use with the IBS-0331-HD only. Includes 1 IPC, 1 RADIO-900M and mounting bracket kit. Upgrades the HPSA-3100 series with an IPC to operate with the WAVES over IP system (IBS-0331-HD Series). Wireless Ethernet 900 MHz for adding wireless nodes Uninterruptible Power Supply for the IPC WoIP High Power Speaker Array (HPSA) Series, Wide-Area MNS, includes an IPC in the electronics cabinet WoIP Autonomous Control Unit (ACU), In-building MNS, includes an IPC-8000 as part of its system components a Operating temperature and humidity are dependent on the equipment the IPC is installed. b See separate specification sheets for the above equipment and accessories. Architects and engineers specifications The WAVES over IP Ethernet communications device shall be model IPC, IPC-8000, IPC-8001 or equivalent that drives audible, visual and data devices within the WAVES over IP Mass Notification System. IPC shall comply with relevant IEEE 802.11 standards. It shall utilize Real-time Transport Protocol (RTP) and RTP Control Protocol (RTCP) for audio transmission and be capable of sending a single stream of data to multiple recipients/nodes simultaneously. The IPC shall be a LAN-based device that can either reside on an organization’s current network infrastructure or on its own private network. It shall be RS-232 and allow for individual and zone addressing with synchronized audible and visual message output. Each IPC unit shall receive and transmit signals from the LAN to and from the IPC located at the WoIP Integrated Base Station (IBS) and other IPC units within the network. Each IPC unit shall have a unique address in the WAVES over IP network, and is individually software controlled from the IBS. The IPC shall provide supervision and monitoring with auto-diagnostics. Each IPC unit shall be able to conduct supervisory built-in self-tests (BIT) that are reported periodically or on-demand to the WoIP IBS where they are displayed and logged. Changes in supervised variables shall trigger active conditions at the IBS and can be further programmed to initiate messaging events throughout the system. The communications device shall include three (3) digital inputs and three (3) commandable relays. Power out, Line-level Audio In/Out and 2 x 15 Watt Amplifier Out and 15 VDC isolated output shall be built in. A 4-port Ethernet switch for connecting accessories shall also be built in. Protocols supported shall be RTP running on UDP and TCP/IP for file downloads, set up only. The IPC shall support the highest network security standards with encryption—256-bit AES. It shall feature dynamic role-based password protection. NNote: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Eaton’s business standard terms and conditions. WE ENCOURAGE AND SUPPORT NICET CERTIFICATION 18 MONTH WARRANTY Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Eaton Life safety & mass notification solutions 273 Branchport Ave. Long Branch, NJ 07740 eaton.com/massnotification © 2015 Eaton All Rights Reserved Printed in USA Publication No. TD450019EN December 2015 4 EATON www.eaton.com Eaton is a registered trademark. All other trademarks are property of their respective owners.