Fiberglass - Cable Tray Numbering System To order a Fiberglass straight section of cable tray, select the appropriate size and material from the charts below and place those symbols in the sequence shown to form the complete catalog number. Procedure: 1. Select the correct B-Line series Fiberglass tray using the Load Data for straight sections shown on page FCT-21 for 3", page FCT-22 for 4", page FCT-23 – FCT-25 for 6" and page FCT-26 for 8" fittings. 2. Select the resin required. Polyester, Vinyl Ester, or Zero Halogen/Dis-Stat. Refer to Corrosion Guide on pages FCT-3 and FCT-4, for the effect of environmental conditions on the desired material and the effective temperature range on page FCT-5. 3. The tray prefix is completed by inserting the rung spacing. 4. Select the desired width in inches. Refer to How To Size Cable Tray Section if width has to be computed based on number and size of cables. See pages FCT-10 thru FCT-12. 5. Finally select the straight section length in inches. Fiberglass 120 [10'] (3m) or 240 [20'] (6m) Straight Section Part Numbering Example: 24 Prefix F 09 - 24 Material Rung Spacing 13 24 36 46 H46 48 F - Fiberglass (Gray) Polyester Resin FV - Fiberglass (Beige) Vinyl Ester Resin FA - Zero Halogen/ Dis-Stat (Black) 6" 9" 12" (152) (228) (305) Width 6" 9" 12" 18" 24" 30" 36" *See page 355 for Marine Rung option. Length (152) (228) (305) (457) (609) (762) (914) 120 [10 ft] 240 [20 ft] Fiberglass Series - 120 (3m) (6m) Note: One pair of splice plates with SS6 hardware included. Fitting Section Part Selector Prefix Example: 4 Height 3" 4" 6" 8" (76) (101) (152) (203) F - 24 Material F - Fiberglass (Gray) Polyester Resin FV - Fiberglass (Beige) Vinyl Ester Resin FA - Zero Halogen/ Dis-Stat (Black) - 90 HB Width 6" 9" 12" 18" 24" 30" 36" (152) (228) (305) (457) (609) (762) (914) 24 Angle 45˚ 90˚ Notes: Standard rung spacing on fittings is 9" (225). Splice plates with SS6 hardware included. Cable Tray Systems FCT-20 Type HB HT HX VI VO VT VTU RR LR SR - Horizontal Bend Horizontal Tee Horizontal Cross Vertical Inside Bend Vertical Outside Bend Vertical Tee Vertical Tee, Up Right Reducer Left Reducer Straight Reducer Radius 12" 24" 36" (305) (609) (914)