CODE ISSUES FROM PREVIOUS MEETING

advertisement
CODE ISSUES FROM PREVIOUS MEETING
• Single non GFCI receptacle for condensate pumps in crawl at furnace:
If receptacle is existing and a like for like unit is being changed out, receptacle will be
permitted to remain as is, otherwise new code change must be met.
• 2008 Code Change Amendments:
210.8(A)(3), 210.12, 250.50, 334.15(C), 406.8, 406.11, 338.10(B)(4)(a). These
amendments can be found on meckpermit.com
AGENDA
• No ruling from the General Assembly on the amendments waiting for
Legislative review.
• Does the addition of 6-8 electrical outlets on an existing circuit require a
permit?
Per the NC General Statutes Chapter 153A---Part 4
153A-357. Permits.
(a)
No person may commence or proceed with:
(1)
The construction, reconstruction, alteration, repair, movement to another
site, removal, or demolition of any building;
(2)
The installation, extension, or general repair of any plumbing system;
(3)
The installation, extension, alteration, or general repair of any heating or
cooling equipment system; or
(4)
The installation, extension, alteration, or general repair of any electrical
wiring, devices, appliances, or equipment
without first securing from the inspection department with jurisdiction over the site of
the work each permit required by the State Building Code and any other State or local
law or local ordinance or regulation applicable to the work
• Code Clarification Policies
• Other
Next Meeting: August 6, 2008
Download