NanoScanTechnology reasoned innovations Ratis Applications: ► Scanning Probe Microscopy ► Scanning Confocal Raman Microscopy ► Near-filed Probe Microscopy ► Tip-Enhanced Raman Spectroscopy (TERS) ► Tip-Enhanced Fluorescent Spectroscopy (TEFS) ► Positioning / scanning Where to use: Scanning Stage ► Biology ► Chemistry ► Physics ► Interdisciplinary researches: ▼Nanotechnology ▼Material Science ▼Pharmaceutics ▼Microelectronics ► Instrumentation Compatibility: ► Our R&D team has 10-years experience in the field of scanning probe microscopy ► The Ratis flexible configuration for diverse applications ► Unique combination of drive electronics system and the NSpec software will enable you to carry out your experiments in an extremely short time ► Centaur ► Certus Optic ► Ratis web: www.nanoscantech.com e-mail: info@nanoscantech.ru Contacts: Russia 141700, Dolgoprudny, Zavodscaya St, 7 Phone: +7 (495) 642-40-68 +7 (495) 642-40-67 Nano Scan Technology Ltd. i 31.5 0.5 30 31.5 Parameter X10Y10 X15Y15 X10Y10Z25 X15Y15Z25 XY range, μm 100x100 150x150 100x100 150x150 Z range, μm Minimum scan step, nm Angle tilting over the full range, nm 0,1 < 0.01 ° 0,1 < 0.01 ° 25 0,1 < 0.01 ° 25 0,1 < 0.01 ° 1 - 1 - 1 3 1 3 10 100 10 100 10 100 10 100 Resonant frequency XY, kHz Resonant frequency Z, kHz Maximum scanning speed, Hz (line/sec) Мaximum sample weight, g web: www.nanoscantech.com e-mail: info@nanoscantech.ru i 46.5 41 48 50.5 100 The Ratis: Ratis models: The Ratis features: 15 ► Ratis – plane-parallel device for positioning / scanning. The device is a monolithic metal body (usually made of high quality aluminum alloy), in which EDM wire-eroding and other methods of precision machining formed channels for 154° piezoceramic actuators, mobile elements of stage, etc. This design provides excellent linearity and flatness of the 45 movement, in contrast to the classical scanners based on 6 BALLS 4 piezoelectric tubes, the surface scan which is in the sphere. In addition, the plane-parallel scanners have high mechanical 50.5 strength, compared with fragile piezoelectric tubes. 48 ► All axes Ratis scanners are equipped with capacitive displacement sensors included in the chain of digital 42 feedback. It provides high accuracy and linearity of 8x 3 movement, eliminates the effects of drift (creep) piezoceramics. The measuring part is based on TDC (time-to-digital converters) that are physically located as close to the sensors, and immediately issue a digital signal proportional to the measured capacitance. This minimizes the influence of external electromagnetic noise, and use long cables to connect the scanner to the controller. 41 ►Control Ratis scanning stage by means of a universal controller EG-3000 46.5 and software NSpec. ► Actually, plane stage Ratis + fully functional SPM controller EG-3000 universal software NSpec are complete scanning, data acquisition and visualization system, which is a “heart” of any scanning microscope, and perfectly fits for any “home made” systems. Customer, which task is using own home made nanosensor of some physical signal to obtain it’s distribution at nanometer scale, purchasing such a product , saves his scientific project time and resources. ► Electronic controller EG-3000 is designed to control SPM or confocal microscope performance. Controller provides data acquisition from system sensors and external devices, applies control voltage to scanners piezoelectric actuators, all obtained information is transferring to PC work station for visualization and processing. Control signal is transferring from PC to controller for adjust all system parameters. One of the most important parts of the EG-3000 controller is closed loop feedback system. Based on a high quality 20-bit TDC (Time to Digital Converter) to measure displacement capacitance sensors. Any available system signal can be used for SPM feedback. Controller is capable to operate 6 channels with feed back simultaneously, which allows to scan by tip and by sample both. ► EG-3000 SPM controller contains 2-channel lock-in amplifier to provide resonant SPM techniques, for example non contact SPM mode. Lock in amplifier includes high stable voltage generator based on digital frequency synthesizer. High speed data processing implemented, using programmable logic (PLIS), allows to perform high quality lock in performance up to 1.5 MHz band. ► EG-3000 has malty channel (up to 12) stepping motor control with micro step option for rough adjustments of scanning head (stage). ► Controller has external analog inputs and outputs for external equipment connections, sync inputs and outputs. Connection with PC work station is provided via USB interface. Universal software Nspec, designed for using with EG-3000 has wide range of possibilities for data processing, which allows to implement set of modern SPM techniques. NSpec is capable of running under different operation systems.