Instrument Status • On/Off Cycle: 26 • Hours On: ~52000 hours

advertisement

Instrument Status

• On/Off Cycle: 26

• Hours On: ~52000 hours

– Continuous operations since 1/15/2005 (probe relay)

• HDAC Filament Modulation:

– Filament 1: 97.28 hours

– Filament 2: 12.22 hours

– No change since last meeting (next: 2006/255)

UVIS TEAM MEETING 7/2006

1

FSW Status

• No Changes since last meeting

• ISA Z70771

– Fixed by FSW patch in C24

– Fixed by FSW V1.3 starting C31

• ISA Z86939 (bad EUV data in S11 icylon)

– Probably FSW problem

– Workaround by updating the instrument setup

UVIS TEAM MEETING 7/2006

2

GSW Issues

• No new ground software problem

UVIS TEAM MEETING 7/2006

3

Operational Issues

• 3 known planning errors since last meeting:

– UVIS_020IC_IMPACT001_RIDER,

UVIS_020IC_IMPACT002_RIDER,

UVIS_020IC_IMPACT003_RIDER and

UVIS_021IC_IMPACT002_RIDER: Overflow of the internal buffer - HSP is OK, FUV was not ingested.

• Checklist updated

– UVIS_025IC_FOMALHAUT_PRIME: Star outside the

HSP field of view.

• Checklist updated

– All IPHSURVEYs in S20 assumed a non-rotating S/C.

4

UVIS TEAM MEETING 7/2006

Planning/Sequencing Issues

• New trajectory/deletion of IMPACT requests

– Example S25

• 14 prime requests - 11 to be re-done (partially or completely)

• Shorter sequence (30 days vs 45 days)

• S23/S24/S25 DSN allocation issues

• As much as possible before the start of a sequence development go thru all the requests and check the instrument setup - S23 has been really bad.

• And when defining an instrument setup use the instrument set up language that was defined in

2001.

5

UVIS TEAM MEETING 7/2006

S25 SOPU

• Started this morning

• 2006-295T18:26 to 2006-328T16:30 (10/22 to 11/24)

6

UVIS TEAM MEETING 7/2006

Notes on DAPS IDL routines

• The accuracy of the SCLK to SCET conversion depends on which version of convert_sclk.pro is used.

• Currently you should be running version 1.12

(which follows the latest version of the spacecraft clock conversion file - SCLKSCET.00098)

• The convert_sclk.pro version number is at the top of the file

;

;$Header: /cassini2/uvis_fm/daps_tools/RCS/convert_sclk.pro, v 1.13 2006/07/06 22:59:33 uvis_fm Exp $

;

7

UVIS TEAM MEETING 7/2006

Download