Instrument Status • On/Off Cycle: 26 • Hours On: ~56,000 hours – Continuous operations since 1/15/2005 (probe relay) • HDAC Filament Modulation: – Filament 1: 100.28 hours – Filament 2: 12.22 hours – Last: 2006/255 UVIS TEAM MEETING 1/2007 1 FSW Status • No Changes since last meeting • Old ISA – ISA Z70771 • Fixed by FSW patch in C24 • Fixed by FSW V1.3 starting C31 – ISA Z86939 (bad EUV data in S11 icylon) • Probably FSW problem • Workaround by updating the instrument setup – That is if we don’t forget to use the updated setup (UVIS_026RH_STARE001_PRIME) UVIS TEAM MEETING 1/2007 2 GSW Issues • Problem with HSP data set – Duplication of the first record when the data set was created due to data loss – Data has been re-ingested • Time error in DAPS metadata (start time) – Caused by the correct clock kernel not being ingested – Time information has been re-written UVIS TEAM MEETING 1/2007 3 Operational Issues • UVIS_026ST_ALPVIR002_PRIME (T16) – Incorrect pointing dead band requested • (2.0, 2.0, 2.0) vs (0.5, 0.5, 0.5) – Check has been added to our checklist – ISA Z89032 UVIS TEAM MEETING 1/2007 4 Planning/Sequencing Issues • No DSN allocation until late in the sequence development – No sponge bit – It is difficult for us to participate to the R/T sponge bit • S27 may be the first time we will be able to do some of it • RBOT analysis – JPL is trying to minimize the time the RW are under 300 rpm – Late pointing design modification • S27: UVIS_037ST_UREPSLUP001_PRIME - Added +20 degree rotation around Y axis • S28: UVIS_040ST_URTHEARA001_PRIME - Added a +70 degree rotation around Y axis UVIS TEAM MEETING 1/2007 5 Data Corruption (ISA Z89728) • First reported on 2006/336 • Probably caused by 1 to 4 faulty sub modules on SSR-A • Consequences: – Corrupted packet header (JPL and instruments can filter that via ground processing) => data gap – Corrupted science header => data gap • Has caused the L0 processing software to crash • May be able to filter that via ground processing. – Corrupted science data • Impossible to filter during L0 processing • Trying to query JPL database around time of data corruption – Not always successful. UVIS TEAM MEETING 1/2007 6 Example of corrupted data • UVIS_034RI_0PHASE001_VIMS: record #3 QuickTime™ and a TIFF (LZW) decompressor are needed to see this picture. UVIS TEAM MEETING 1/2007 7 Example of corrupted data • UVIS_034RI_0PHASE001_VIMS: record #4 QuickTime™ and a TIFF (LZW) decompressor are needed to see this picture. UVIS TEAM MEETING 1/2007 8 Data Corruption • Working around the corrupted data – Time consuming – Trial and error – Example: UVIS_036RF_FMOVIE001_VIMS • Data from 2007-005T23:31:41 to 2007005T23:56:41 was not ingested. UVIS TEAM MEETING 1/2007 9 Notes on DAPS IDL routines • You should use the ICY version of convert_sclk.pro – Make sure that you use the last clock kernel (cas00102.tsc) • If you need to use the old version of convert_sclk.pro it is up to date on the UVIS team site under the name of old_convert_sclk.pro (“version 1.2” appears on the header of the file) UVIS TEAM MEETING 1/2007 10