VTUNE
NC
NC
NC
NC
31
30
29
28
27
26
25
NC
1
24
NC
NC
2
23
NC
NC
3
22
NC
NC
4
21
VCC
GND
5
20
NC
NC
6
19
RFOUT
NC
7
18
NC
NC
8
17
NC
15
16
PACKAGE
BASE
GND
13153-001
14
NC
13
NC
12
NC
11
NC
10
RFOUT/2
NC
9
NC
Point to point and multipoint radios
Test equipment and industrial controls
Very small aperture terminals (VSATs)
32
GND
APPLICATIONS
NC
FUNCTIONAL BLOCK DIAGRAM
Dual output frequency range
fOUT = 10.38 GHz to 11.30 GHz
fOUT/2 = 5.19 GHz to 5.65 GHz
Power output (POUT): 8 dBm
Single-side band (SSB) phase noise
−86 dBc/Hz typical at 10 kHz
−114 dBc/Hz typical at 100 kHz
No external resonator needed
32-lead, RoHS compliant, 5 mm × 5 mm LFCSP (25 mm²)
NC
FEATURES
NC
Data Sheet
10.38 GHz to 11.30 GHz MMIC VCO with
Half Frequency Output
HMC1164
Figure 1.
GENERAL DESCRIPTION
The HMC1164 is a monolithic microwave integrated circuit
(MMIC), voltage controlled oscillator that integrates a
resonator, a negative resistance device, and a varactor diode,
and features a half frequency output.
Rev. 0
Because of the monolithic construction of the oscillator, the
output power and phase noise performance are excellent over
temperature.
The power output is 8 dBm typical from a 5 V supply voltage.
The voltage controlled oscillator is housed in a RoHS-compliant
LFCSP package and requires no external matching components.
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
HMC1164
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Pin Configuration and Function Descriptions..............................5
Applications ....................................................................................... 1
Interface Schematics .....................................................................6
Functional Block Diagram .............................................................. 1
Typical Performance Characteristics ..............................................7
General Description ......................................................................... 1
Evaluation Printed Circuit Board (PCB) ........................................9
Revision History ............................................................................... 2
Bill of Materials ..............................................................................9
Specifications..................................................................................... 3
Packaging and Ordering Information ......................................... 10
Absolute Maximum Ratings ....................................................... 4
Outline Dimensions ................................................................... 10
ESD Caution .................................................................................. 4
Ordering Guide .......................................................................... 10
REVISION HISTORY
5/15—Revision 0: Initial Version
Rev. 0 | Page 2 of 10
Data Sheet
HMC1164
SPECIFICATIONS
TA = −40°C to +85°C, VCC = 5 V, unless otherwise noted.
Table 1.
Parameter
FREQUENCY
Range
fOUT
fOUT/2
Drift Rate
Pulling
Pushing
POWER OUTPUT
RFOUT
RFOUT/2
Supply Current (ICC)
Min
Max
Unit
11.30
5.65
1.0
0.3
GHz
GHz
MHz/°C
MHz p-p
8.0
MHz/V
10.38
5.19
4
4
160
HARMONICS, SUBHARMONICS
Half
Second
Third
TUNING
Voltage (VTUNE)
Sensitivity
Tune Port Leakage Current
OUTPUT RETURN LOSS (RFOUT)
SSB PHASE NOISE
10 kHz Offset
100 kHz Offset
Typ
8
8
175
200
218
12
12
290
39
20
30
2
80
Pulling into a 2.0:1 voltage standing
wave ratio (VSWR)
At VTUNE = 5 V
VCC = 4.75 V
VCC = 5.00 V
VCC = 5.25 V
RFOUT
dBc
dBc
dBc
13
300
10
V
MHz/V
µA
dB
−82
−110
dBc/Hz
dBc/Hz
3.5
−86
−114
dBm
dBm
mA
mA
mA
Test Conditions/Comments
Rev. 0 | Page 3 of 10
VTUNE = 13 V
HMC1164
Data Sheet
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
VCC
VTUNE
Temperature
Operating
Storage
Nominal Junction (to Maintain
1 Million Hours MTTF)
Nominal Junction (TA = 85°C)
Maximum Reflow Temperature
(MSL3 Rating)
Thermal Resistance (Junction to
Ground Paddle)
ESD Sensitivity (Human Body Model)
Rating
5.5 V dc
0 V to 15 V
−40°C to +85°C
−65°C to +150°C
135°C
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
ESD CAUTION
111°C
260°C
26°C/W
Class 1A
Rev. 0 | Page 4 of 10
Data Sheet
HMC1164
NC
NC
VTUNE
NC
NC
NC
NC
32
31
30
29
28
27
26
25
NC
1
24
NC
NC
2
23
NC
NC
3
22
NC
NC
4
GND
5
NC
7
18
NC
NC
8
17
NC
9
10
11
12
13
14
15
16
NC
NC
NC
RFOUT
NC
19
NC
6
RFOUT/2
NC
GND
20
NC
VCC
TOP VIEW
(Not to Scale)
NC
HMC1164
21
NOTES
1. NC = NO CONNECT. HOWEVER, THESE PINS MAY BE
CONNECTED TO RF/DC GROUND WITHOUT AFFECTING
THE PERFORMANCE OF THE DEVICE.
2. THE EXPOSED PAD MUST BE CONNECTED TO RF/DC GROUND.
13153-002
NC
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
1 to 4, 6 to 10, 13 to 18,
20, 22 to 28, 30 to 32
5, 11
12
19
21
29
Mnemonic
NC
GND
RFOUT/2
RFOUT
VCC
VTUNE
EP
Description
No Connect. However, these pins can be connected to RF/dc ground without affecting the
performance of the device.
Ground. Connect these pins to RF/dc ground.
Half Frequency Output. This pin is ac-coupled.
RF Output. This pin is ac-coupled.
Supply Voltage (5 V).
Control Voltage and Modulation Input. The modulation bandwidth is dependent on the drive
source impedance.
Exposed Pad. The exposed metal pad must be connected to RF/dc ground.
Rev. 0 | Page 5 of 10
HMC1164
Data Sheet
INTERFACE SCHEMATICS
13153-003
RFOUT/2
130pF
4pF
Figure 3. RFOUT/2 Interface
Figure 6. VTUNE Interface
GND
Figure 4. RFOUT Interface
13153-007
13153-004
RFOUT
Figure 7. GND Interface
VCC
13153-005
30pF
Figure 5. VCC Interface
Rev. 0 | Page 6 of 10
13153-006
3nH
VTUNE
Data Sheet
HMC1164
TYPICAL PERFORMANCE CHARACTERISTICS
260
12.0
+85°C
+25°C
–40°C
250
240
11.0
230
ICC (mA)
10.5
10.0
220
210
200
190
9.5
180
+85°C
+25°C
–40°C
170
8.5
0
1
2
3
4
5
6
7
8
9
TUNING VOLTAGE (V dc)
10
11
12
13
160
0
Figure 8. Output Frequency vs. Tuning Voltage (VTUNE)
1
2
3
4
5
6
7
8
9
TUNING VOLTAGE (V dc)
10
11
12
13
13153-011
9.0
13153-008
OUTPUT FREQUENCY (GHz)
11.5
Figure 11. Supply Current (ICC) vs. Tuning Voltage (VTUNE)
6.00
12
11
5.80
8
7
6
5
4
3
+85°C
+25°C
–40°C
2
1
1
2
3
4
5
6
7
8
9
TUNING VOLTAGE (V dc)
10
11
12
13
5.20
5.00
4.80
4.60
+85°C
+25°C
–40°C
4.20
0
Figure 9. Output Power vs. Tuning Voltage (VTUNE)
1
2
3
9
4
5
6
7
8
TUNING VOLTAGE (V dc)
10
11
12
13
Figure 12. RFOUT/2 Output Frequency vs. Tuning Voltage (VTUNE)
900
12
+85°C
+25°C
–40°C
11
10
OUTPUT POWER (dBm)
700
600
500
400
300
200
9
8
7
6
5
4
3
+85°C
+25°C
–40°C
2
100
0
1
2
3
4
5
6
7
8
9
TUNING VOLTAGE (V dc)
10
11
12
13
13153-010
1
0
0
0
Figure 10. Sensitivity vs. Tuning Voltage (VTUNE)
1
2
3
4
5
6
7
8
9
TUNING VOLTAGE (V dc)
10
11
12
13
Figure 13. RFOUT/2 Output Power vs. Tuning Voltage (VTUNE)
Rev. 0 | Page 7 of 10
13153-013
800
SENSITIVITY (MHz/V)
5.40
4.40
0
0
5.60
13153-012
OUTPUT FREQUENCY (GHz)
9
13153-009
OUTPUT POWER (dBm)
10
HMC1164
Data Sheet
–10
–75
+85°C
+25°C
–40°C
–20
–30
SSB PHASE NOISE (dBc/Hz)
–85
–90
–40°C, 10 kHz
+25°C, 10 kHz
+85°C, 10 kHz
–40°C, 100 kHz
+25°C, 100 kHz
+85°C, 100 kHz
–95
–100
–105
–110
–40
–50
–60
–70
–80
–90
–100
–110
–120
–130
–140
–115
0
1
2
3
9
8
6
7
4
5
TUNING VOLTAGE (V dc)
10
11
12
13
–160
100
1k
10k
100k
OFFSET FREQUENCY (Hz)
1M
10M
Figure 15. SSB Phase Noise vs. Offset Frequency at VTUNE = 5 V
Figure 14. SSB Phase Noise vs. Tuning Voltage (VTUNE)
Rev. 0 | Page 8 of 10
13153-015
–150
–120
13153-014
SSB PHASE NOISE (dBc/Hz)
–80
Data Sheet
HMC1164
EVALUATION PRINTED CIRCUIT BOARD (PCB)
J1
J5
VCC
U1
J2
13153-016
J4
J3
Figure 16. 110225-3 Evaluation PCB
The circuit board used in this application uses RF circuit design
techniques. Ensure that signal lines have 50 Ω impedance and
connect the package ground leads and backside ground paddle
directly to the ground plane.
Use a sufficient number of via holes to connect the top and
bottom ground planes. The evaluation circuit board shown in
Figure 16 is available from Analog Devices, Inc., upon request.
BILL OF MATERIALS
Table 4. Bill of Materials for the EV1HMC1164LP5
Item
J1 to J4
J5, J6
C1 to C3
C4
C5 to C7
C8
U1
PCB 1
1
2
Description
PCB mount SMA RF connectors
2 mm dc header
100 pF capacitors, 0402 package
1000 pF capacitor, 0402 package
2.2 μF tantalum capacitors
0.01 μF capacitor, 0603 package
HMC1164LP5E VCO
110225-3 evaluation board 2
Circuit board material is Rogers 4350.
Reference this number when ordering the complete evaluation PCB.
Rev. 0 | Page 9 of 10
HMC1164
Data Sheet
PACKAGING AND ORDERING INFORMATION
OUTLINE DIMENSIONS
0.30
0.25
0.18
1
24
0.50
BSC
3.80
3.65 SQ
3.50
EXPOSED
PAD
17
TOP VIEW
1.00
0.90
0.80
8
16
9
BOTTOM VIEW
3.50 REF
0.05 MAX
0.02 NOM
COPLANARITY
0.08
0.20 REF
SEATING
PLANE
PKG-000000
0.45
0.40
0.35
PIN 1
INDICATOR
32
25
0.20 MIN
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
03-04-2015-A
PIN 1
INDICATOR
5.10
5.00 SQ
4.90
COMPLIANT TO JEDEC STANDARDS MO-220-VHHD-4.
Figure 17. 32-Lead Lead Frame Chip Scale Package [LFCSP_VQ]
5 mm × 5 mm Body, Very Thin Quad
(HCP-32-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
HMC1164LP5E
Temperature Range
−40°C to +85°C
MSL Rating2
MSL3
Package Description
32-Lead LFCSP_VQ
Package Option
HCP-32-1
Qty.
HMC1164LP5ETR
−40°C to +85°C
MSL3
32-Lead LFCSP_VQ, 7” Tape and Reel
HCP-32-1
500
EV1HMC1164LP5
Evaluation Board
1
The HMC1164LP5E and HMC1164LP5ETR are RoHS-compliant parts.
See the Absolute Maximum Ratings section, Table 2.
3
XXXX is a placeholder for the 4-digit lot number.
2
©2015 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D13153-0-5/15(0)
www.analog.com/HMC1164
Rev. 0 | Page 10 of 10
Branding3
H1164
XXXX
H1164
XXXX