VTUNE
NC
NC
NC
NC
30
29
28
27
26
25
NC
1
24
NC
NC
2
23
NC
NC
3
22
NC
NC
4
21
VCC
GND
5
20
NC
NC
6
19
RFOUT
NC
7
18
NC
NC
8
17
NC
14
15
16
PACKAGE
BASE
GND
13051-001
13
NC
12
NC
11
NC
10
NC
NC
9
GND
Point to point and multipoint radio
Test equipment and industrial controls
VSAT
31
RFOUT/2
APPLICATIONS
32
NC
Dual output: fO = 8.45 GHz to 9.3 GHz
fO/2 = 4.225 GHz to 4.65 GHz
POUT: 12 dBm
Phase noise: −116 dBc/Hz at 100 kHz
No external resonator needed
RoHS compliant, 5 mm × 5 mm SMT package: 25 mm²
NC
FUNCTIONAL BLOCK DIAGRAM
NC
FEATURES
NC
Data Sheet
MMIC VCO with Half Frequency Output,
8.45 GHz to 9.30 GHz
HMC1160
Figure 1.
GENERAL DESCRIPTION
The HMC1160 is a MMIC voltage controlled oscillator that
integrates a resonator, a negative resistance device, and a
varactor diode, and features a half frequency output.
Power output is 12 dBm typical from a 5 V supply voltage. The
voltage controlled oscillator is housed in a RoHS compliant
SMT package and requires no external matching components.
Because of the monolithic construction of the oscillator, output
power and phase noise performance are excellent over
temperature.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice.
No license is granted by implication or otherwise under any patent or patent rights of Analog
Devices.Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2014–2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
HMC1160
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Interface Schematics .....................................................................6
Applications ....................................................................................... 1
Typical Performance Characteristics ..............................................7
Functional Block Diagram .............................................................. 1
Evaluation Printed Circuit Board (PCB) ........................................9
General Description ......................................................................... 1
Bill of Materials ..............................................................................9
Revision History ............................................................................... 2
Packaging and Ordering Information ......................................... 10
Specifications..................................................................................... 3
Outline Dimensions ................................................................... 10
Absolute Maximum Ratings ....................................................... 4
Ordering Guide .......................................................................... 10
ESD Caution .................................................................................. 4
Pin Configuration and Function Descriptions ............................. 5
REVISION HISTORY
5/15—v00.0814 to Rev. A
This Hittite Microwave Products data sheet has been reformatted
to meet the styles and standards of Analog Devices, Inc.
Updated Format .................................................................. Universal
Added Interface Schematics Section, Renumbered Figures
Sequentially ....................................................................................... 6
Reordered Figure Sequence, Typical Performance
Characteristics Section..................................................................... 7
Deleted Figure: Frequency vs. Tuning Voltage, T = 25°C,
Renumbered Figures Sequentially .................................................. 7
Deleted Typical Applications Circuit ............................................. 9
Changes to Ordering Guide .......................................................... 11
Rev. A | Page 2 of 10
Data Sheet
HMC1160
SPECIFICATIONS
TA = −40°C to +85°C, VCC = 5 V, unless otherwise noted.
Table 1.
Parameter
FREQUENCY
Range
fO
fO/2
Drift Rate
Pulling
Pushing
POWER OUTPUT
RFOUT
RFOUT/2
Supply Current (ICC)
Min
8.45
4.225
Max
Unit
Test Conditions/Comments
9.3
4.65
GHz
GHz
MHz/°C
MHz p-p
MHz/V
Pulling into a 2.0:1 VSWR
At VTUNE = 5 V
dBm
dBm
mA
mA
mA
VCC = 4.75 V
VCC = 5.00 V
VCC = 5.25 V
0.74
4.5
5.5
9
0
195
HARMONICS, SUBHARMONICS
1/2
Second
Third
TUNING
Voltage (VTUNE)
Sensitivity
Tune Port Leakage Current
OUTPUT RETURN LOSS
SSB PHASE NOISE
10 kHz Offset
100 kHz Offset
Typ
17
8
240
260
275
325
37
18
30
2
40
dBc
dBc
dBc
13
250
10
V
MHz/V
μA
dB
−85
−110
dBc/Hz
dBc/Hz
2
−90
−116
Rev. A | Page 3 of 10
VTUNE = 13 V
HMC1160
Data Sheet
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
VCC
VTUNE
Temperature
Operating
Storage
Nominal Junction (To Maintain
1 million hours MTTF)
Nominal Junction (T = 85°C)
Maximum Reflow Temperature
(MSL3 Rating)
Thermal Resistance (Junction to
Ground Paddle)
ESD Sensitivity (Human Body
Model)
Rating
5.5 V dc
0 V to 15 V
−40°C to +85°C
−65°C to +150°C
135°C
125°C
260°C
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
ESD CAUTION
31°C/W
Class 1A
Rev. A | Page 4 of 10
Data Sheet
HMC1160
NC
NC
VTUNE
NC
NC
NC
NC
32
31
30
29
28
27
26
25
NC
3
22
NC
NC
4
HMC1160
21
VCC
GND
5
TOP VIEW
(Not to Scale)
20
NC
NC
6
19
RFOUT
NC
7
18
NC
NC
8
17
NC
9
10
11
12
13
14
15
16
NC
NC
NC
23
NC
2
NC
NC
RFOUT/2
NC
GND
24
NC
1
NC
NC
NOTES
1. NC = NO CONNECT. HOWEVER, THESE PINS MAY BE
CONNECTED TO RF/DC GROUND WITHOUT AFFECTING
THE PERFORMANCE OF THE DEVICE.
2. THE EXPOSED PAD MUST BE CONNECTED TO RF/DC GROUND.
13051-002
NC
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
1 to 4, 6 to 10, 13 to 18, 20, 22 to
28, 30 to 32
12
19
21
29
Mnemonic
NC
5, 11
GND
EP
RFOUT/2
RFOUT
VCC
VTUNE
Description
No Connect. However, these pins can be connected to RF/dc ground without affecting
the performance of the device.
Half Frequency Output. This pin is ac-coupled.
RF Output. This pin is ac-coupled.
Supply Voltage (5 V).
Control Voltage and Modulation Input. The modulation bandwidth is dependent on
the drive source impedance.
Ground. These pins must be connected to RF/dc ground.
Exposed Paddle. The package bottom has an exposed metal paddle that must be
connected to RF/dc ground.
Rev. A | Page 5 of 10
HMC1160
Data Sheet
INTERFACE SCHEMATICS
VTUNE
RFOUT/2
2Ω
3.5nH
72pF
13051-014
13051-011
4pF
Figure 3. RFOUT/2 Interface
Figure 6. VTUNE Interface
RFOUT
13051-015
13051-012
GND
Figure 7. GND Interface
Figure 4. RFOUT Interface
VCC
13051-013
26pF
Figure 5. VCC Interface
Rev. A | Page 6 of 10
Data Sheet
HMC1160
TYPICAL PERFORMANCE CHARACTERISTICS
300
10.0
–40°C
+25°C
+85°C
9.5
280
270
9.0
ICC (mA)
OUTPUT FREQUENCY (GHz)
–40°C
+25°C
+85°C
290
8.5
260
250
240
8.0
230
220
7.5
1
2
3
4
5
6
7
8
9
TUNING VOLTAGE (VDC)
10
11
12
13
200
13051-003
0
0
2
3
4
5
6
7
8
9
10
11
12
13
12
13
TUNING VOLTAGE (VDC)
Figure 8. Frequency vs. Tuning Voltage
Figure 11. Supply Current (ICC) vs. Tuning Voltage
5.00
16
–40°C
+25°C
+85°C
–40°C
+25°C
+85°C
4.75
OUTPUT FREQUENCY (GHz)
14
OUTPUT POWER (dBm)
1
13051-006
210
7.0
12
10
8
6
4
4.50
4.25
4.00
3.75
0
1
2
3
4
5
6
7
8
9
10
11
12
13
TUNING VOLTAGE (VDC)
13051-004
3.50
0
0
2
3
4
5
6
7
8
9
10
11
TUNING VOLTAGE (VDC)
Figure 9. Output Power vs. Tuning Voltage
Figure 12. RFOUT/2 Output Frequency vs. Tuning Voltage
8
600
1
13051-007
2
–40°C
+25°C
+85°C
–40°C
+25°C
+85°C
7
OUTPUT POWER (dBm)
400
300
200
6
5
4
3
2
100
0
0
1
2
3
4
5
6
7
8
9
10
TUNING VOLTAGE (VDC)
11
12
13
Figure 10. Sensitivity vs. Tuning Voltage
0
0
1
2
3
4
5
6
7
8
9
10
11
12
TUNING VOLTAGE (VDC)
Figure 13. RFOUT/2 Output Power vs. Tuning Voltage
Rev. A | Page 7 of 10
13
13051-008
1
13051-005
SENSITIVITY (MHz/V)
500
Data Sheet
–50
–80
–60
–85
–70
–90
–95
–40°C, 10kHz
+25°C, 10kHz
+85°C, 10kHz
–40°C, 100kHz
+25°C, 100kHz
+85°C, 100kHz
–100
–105
–110
–80
–90
–100
–110
–120
–115
–130
–120
–140
–125
0
1
2
3
4
5
6
7
8
9
10
11
TUNING VOLTAGE (VDC)
12
13
Figure 14. SSB Phase Noise vs. Tuning Voltage
–40°C
+25°C
+85°C
–150
1k
10k
100k
OFFSET FREQUENCY (Hz)
Figure 15. SSB Phase Noise at VTUNE = 5 V
Rev. A | Page 8 of 10
1M
13051-010
SSB PHASE NOISE (dBc/Hz)
–75
13051-009
SSB PHASE NOISE (dBc/Hz)
HMC1160
Data Sheet
HMC1160
13051-017
EVALUATION PRINTED CIRCUIT BOARD (PCB)
Figure 16. Evaluation Board
The circuit board used in an application uses RF circuit design
techniques. Ensure that signal lines have 50 Ω impedance and
that the package ground leads and backside ground paddle are
connected directly to the ground plane.
BILL OF MATERIALS
Table 4. Bill of Materials EV1HMC1160LP5
Item
J1 to J4
J5, J6
C1 to C3
C4
C5 to C7
C8
U1
PCB1
Use a sufficient number of via holes to connect the top and
bottom ground planes. The evaluation circuit board shown in
16 is available from Analog Devices, Inc., upon request.
1
2
Description
PCB mount SMA RF connector
2 mm dc header
100 pF capacitor, 0402 package
1000 pF capacitor, 0402 package
2.2 μF tantalum capacitor
0.01 μF capacitor, 0603 package
HMC1160 VCO
110225 evaluation board2
Circuit board material is Rogers 4350.
Reference this number when ordering the complete evaluation PCB.
Rev. A | Page 9 of 10
HMC1160
Data Sheet
PACKAGING AND ORDERING INFORMATION
OUTLINE DIMENSIONS
0.30
0.25
0.18
1
24
0.50
BSC
3.80
3.65 SQ
3.50
EXPOSED
PAD
17
TOP VIEW
1.00
0.90
0.80
PKG-000000
0.45
0.40
0.35
8
16
9
BOTTOM VIEW
3.50 REF
0.05 MAX
0.02 NOM
COPLANARITY
0.08
0.20 REF
SEATING
PLANE
PIN 1
INDICATOR
32
25
0.20 MIN
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
03-04-2015-A
PIN 1
INDICATOR
5.10
5.00 SQ
4.90
COMPLIANT TO JEDEC STANDARDS MO-220-VHHD-4.
Figure 17. 32-Lead Lead Frame Chip Scale Package [LFCSP_VQ]
5 mm × 5 mm Body, Very Thin Quad
(HCP-32-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
HMC1160LP5E
Temperature Range
−40°C to +85°C
MSL Rating2
MSL3
Package Description
32-Lead LFCSP_VQ
Package Option
HCP-32-1
Qty.
HMC1160LP5ETR
−40°C to +85°C
MSL3
32-Lead LFCSP_VQ, 7” Tape and Reel
HCP-32-1
500
EV1HMC1160LP5
Evaluation Board
1
The HMC1160LP5E and HMC1160LP5ETR are RoHS compliant parts.
2
See the Absolute Maximum Ratings section, Table 2.
3
XXXX is a placeholder for the 4-digit lot number.
©2014–2015 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D13051-0-5/15(A)
Rev. A | Page 10 of 10
Brand3
H1160
XXXX
H1160
XXXX