Edco SHA-1230FS
Edco SHA-1230FS
AC Power Protection for Traffic Cabinets
FingerSafe 120 VAC Single-Phase 2W+G, 30A
The Edco SHA-1230FS is a FingerSafe 120VAC single-phase 2W+G, 30A surge suppressor/filter designed to shunt electrical type transients affecting the electrical distribution inside a traffic cabinet.
The Edco SHA-1230FS offers 50kA per Mode and 100kA per phase of surge current protection.
The Edco SHA-1230FS utilizes Thermally-protected Metal Oxide Varistors (TMOVs) with an integrated thermally activated element designed to open in the event of overheating due to the abnormal over-voltage, limited current conditions.
General Technical Specifications
Operating Voltage
Operating Current
SVR
In
Peak Surge Current
Operating frequency
EMI Attenuation
SPD Technology
Input/Output Terminal
Fuse/Breaker
Relay Contact
Relay Terminal
Modes of Protection
Connection Type
Operation Temperature
Dimensions (Inches)
Weight
Agency Approvals
120VAC
30A
500V
20kA
50 kA/Mode, 100 kA/Phase, 150 kA/Total
47-63Hz
40 dB typ
MOVs w/L-C Filter
Finger Safe (20-6AWG)
30A (recommended)
Form C Dry Contact (250V, 1A Max.)
3 Position (22-16 AWG)
L-N, L-G, N-G
Recessessed Terminal Screws
-40°C to +85°C
1.875H x 3.25W x 5.75L
12 oz
Design incoporates UL recognized TMOVs (Type 4)
Features
120 VAC, 30A service
FingerSafe connection
Power on and failure indication
Thermally-protected metal oxide varistors (TMOVs)
50kA/mode and 100kA/phase surge current protection
Status/Relay Contacts
5 Year Warranty
Installation Instructions
Wiring Connections
Mounting Diagram
Emerson Network Power Contact information www.EmersonNetworkPower.com/Surge
Surge Protection
100 Emerson Parkway
Binghamton, NY 13905
T: (607) 721-8840
T: (800) 288-6169
F: (607) 722-8713
E: SurgeTech@Emerson.com
IO-50151 5/14 Rev. 2 Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2014 Emerson Electric Co.
While every precaution has been taken to ensure accuracy and completeness herein, Emerson Network Power Surge Protection assumes no responsibility and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. specifications are subject to change without notice.
