Edco ACP-340LED
120 VAC Single Phase 2W + G, 15 A
The ACP-340LED is an upgrade to the popular ACP- 340, adding an LED for failure
indication and much better lightning protection than the standard ACP-340.
The ACP-340LED utilizes Thermally-Protected Metal Oxide Varistors (TMOV’s)
with an integrated thermally activated element designed to open in the event of
overheating due to the abnormal overvoltage, limited current conditions.
The ACP-340LED filtering surge protector absorbs power line noise and switching
transients that other suppressors and RFI filters pass through. The ACP-340LED can
replace the RFI filter when high attenuation of noise above 25 Mhz is not required.
Features
General Technical Specifications
Operating Voltage
120 VAC
Clamping Voltage (@ 1mA)
395 VAC
Clamping Voltage (@ 20kA)
Greater than 250 VAC
Operating Current
Peak Surge Current
15 A
50 kA/Mode, 100 kA/Phase
Operating Frequency
47-63 Hz
EMI Attenuation
60 dB typ
SPD Technology
Thermally-Protected Metal Oxide Varistors (TMOV)
w/ L-C Filter
Modes of Protection
L-N, L-G, N-G
Status Indication
Power On & TMOV’s functional
Connection Type
1/4-20 Stainless Steel Stud
Operating Temperature
Dimensions (in/mm)
Weight (lb/kg)
-40 C to +85 C
1.875” H x 3.25” W x 5.75” L
[47.6 x 82.6 x 146.1 mm]
1.125 lbs [ 0.51 kg]
■■ 50 kA/Mode & 100 kA/phase Surge Current Protection
■■ Thermally-Protected Metal Oxide Varistors (TMOVs)
■■ Power On and Failure LED
■■ 5 Year Warranty
Installation
CABINET POWER AC
HOT BUS
120/AC
INPUT
MAIN LINE
MAIN
NEUTRAL
ACP-340LED
GND
*EARTH
Site variable
(option)
LINE OUT
NEUTRAL OUT
PROTECTED POWER SOURCE
(to controller and other
sensitive electronics)
EARTH
Mounting Diagram
Hole (4 places)
3/16” dia.
PLATE
2.25”
3.25
5.25
5.75
Caution
This product could become excessively hot and rupture in the rare event of power line conditions or surge that exceed its rated
operating specification. Appropriate precautions should be exercised.
High voltages are present on electrical termination. Unit should be serviced by qualified personnel only.
Emerson Network Power Contact information
www.EmersonNetworkPower.com/Surge
Surge Protection
14550 58th St. North
Clearwater, FL 33760
T: (607) 721-8840
T: (800) 288-6169
F: (607) 722-8713
E: SurgeTech@Emerson.com
IO-50193 11/15 Rev. 0 Printed in USA
Emerson Network Power, the Emerson Network Power logo and Edco are trademarks
and service marks of Emerson Electric Co. ©2014 Emerson Electric Co.
While every precaution has been taken to ensure accuracy and completeness herein, Emerson Network Power Surge Protection assumes no responsibility, and disclaims all liability, for damages
resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.