Note:
The door access controller must be connected to the RDU-A and be managed by RDU-M
Appearance:
Keypad instructions:
Number keypad: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 for inputting the numbers;
Function keypad: F1, F2, F3, F4, F5, ESC, ENT for functions operation.
F1: entry functions setting, change password;
F2: parameter setting of the entry controller;
F3: entry user management;
F4: invasion sensor protection by keypad;
F5: input user ID and password to open the door;
ESC: exit setting;
ENT: confirm input or setting;
 Press “F1” when the controller display the “system time”
 When controller displays “ ”, please input the password (default password 000000), then press “ENT” to confirm the password.
 If password input is correct, controller displays “ configuration starts.
” and the
 Keep on pressing “F2” until controller displays “ ” , it means the current ID address of the door controller is “1”, by pressing the “ent” to modify the ID address if there are multiple door controllers connected in daisy chain.
 Other Parameters ： C1: working method of the controller control the first byte

 Boud Rate:
Range: “0-3”; “0” refers to “4800bps”; “1” refers to “9600bps”; “2” refers to “19200bps”; “3” refers to “2400bps”
Remind: the name of the driver of the door access management controller is
“ES5010[com]”.
Device Type: Please select “:ENP_ACC_ES5010[COM]”
PORT: Please select the one port from COM2-COM8 of RDU-A. In this guide of setting,
COM2 is selected.
Device Address: 1; Please input the ID address.
MODULE_ID: Not used, please input “0”.
Click “ADD”, then add “Save configuration”. RDU-A will restart.
Please use the standard network cable to connect the “RS-485 port” to the “COM2” port of
RDU-A.
1 ） Find and Add “RDU-A” into “RDU-M”

2 ） If RDU-A is configured with door access management controller, then the icon of “door access management will be displayed on the menu list of RDU-A
3 ） Click “card manage” a. Add invalid card: to add those “unauthorized cards” which recorded in the system history but not ever be authorized before.
Select the site and set the time period, then search the card in the system history. b.
Add access card:

Card ID: Please input the 10 digits code of the card. If the code is less than 10 digits, please input “0”.
Two cards as options:
ID card: with 10 digits code printed on the card
IC card: no code printing. The code is available from the “access log” after the card is read by the card reader. After getting the “code” of the card, then input the code.
For instance:
Add the card “0012418666”. Click the icon highlighted with red below
Pop-out Window:
The card is authorized the access to the door managed by “ACC” (RDU-A-10.163.236.68), but not authorized to the “5010” (RDU-A-10.163.236.86)
“Authority” can set the authority for “groups” and set the scheduled access management with
“timing setting”