Outside Plant for
Business-Critical Continuity™
Hybrid Energy System Enclosure
ECH48200
Key Features
nMultiple energy sources:
mains, diesel generator, solar
panels, wind turbine, battery
nDiesel generator start/stop
functionality based on battery
SoC or daily fixed time
schedule
nUp to 10.5 kW rectifier
capacity at 97% efficiency
(R48-3500e)
nUp to 12 kW solar converter
(MPPT) capacity at 98%
efficiency (S48-3000)
nUp to 6 kW wind turbine
support
Provides reliable -48V power supply to
unreliable or off-grid telecom sites through
various energy sources.
Description
The Hybrid Energy System Enclosure from Emerson Network Power is an
outdoor control system that provides reliable -48V power supply to unreliable or off-grid telecom sites in the access network. The system is designed
to work with any combination of energy sources (mains, diesel generator,
solar panel, wind turbine) to keep the battery within optimal operating conditions. The use of renewable energy sources is dependent on site location,
which is especially important when considering the use of wind turbines.
Application
Significant OpEx savings can be attained by adding hybrid functionality to a
traditional dual diesel generator set-up that operates 24/7. Adding hybrid
energy will reduce maintenance and fuel costs due to reduced diesel
generator run times.
nSurge/lightning protection on
all inputs (AC and DC)
nTwo level load disconnect to
prolong back-up for
prioritized loads, e.g.
transmission
nIP55 rated outdoor enclosure
nHeat exchanger for climate
control
EN608DRA-HES / 1012
1
Hybrid Energy System Enclosure
Technical Specifications
Input Connections
AC Input
Solar Input
Wind Input
Battery Input
3-phase, 400/230 VAC, 50/60 Hz
4 x 3kW solar arrays via 4 x 63A MCBs
2 x 3kW wind turbines via 2 x 63A MCBs
2 x 160A battery fuses
Output Connections
High Priority Distribution
Low Priority Distribution
1 x 10A, 2 x 32A MCBs
1 x 10A, 2 x 16A, 1 x 63A MCBs
Environmental
Temperature
Climate Control
Protection Class
-20˚C to +45˚C
Heat exchanger
IP55
Safety
Safety Compliance
EN62109-1:2010 and EN50178:1997
Physical Characteristics
Dimensions (H x W x D)
Weight
1025 x 600 x 600 mm (40.35 x 23.62 x 23.62 in.)
82 kg (180.7 lb.), excluding rectifier and solar converter modules
Options
Refer to separate data sheet for standard rectifier R48-3200
Refer to separate data sheet for high-efficiency rectifier R48-3500e
Refer to separate data sheet for high-efficiency solar converter S48-3000
Ordering Information
Catalog Number
EHC48200
Part Number
BFK 904 03/1
Description
Outdoor hybrid energy system enclosure
EmersonNetworkPower.com/EnergySystems (North America)
EmersonNetworkPower.eu/EnergySystems (EMEA)
© Emerson Network Power Energy Systems North America 2012.
Business-Critical Continuity™, Emerson Network Power™, the Emerson Network Power logo, Emerson® and Consider it Solved are service marks and trademarks of Emerson Electric Co.
EnergyMaster™, eSure™, NetPerform™, NetReach™, NetSpan™, NetSure® and NetXtend™ are trademarks of Emerson Network Power Energy Systems North America.
2
EN608DRA-HES / 1012