LORAIN -190VDC Converter System -48VDC to -190VDC Bulk Power DISCONTINUED

advertisement
DISCONTINUED
PRODUCT
LORAIN® -190VDC Converter System
-48VDC to -190VDC Bulk Power
Key Features
n
n
n
n
n
n
n
High Power Density – Bulk Power
design offers the highest power
density in the industry
Reliability – Redundant (n+1) DC
backup power ensures 99.9999%
or better network reliability
Quality of Design – Converter
Modules operate at up to 90%
efficiency, reducing thermal
loads in central office and remote
terminal cabinet applications
Modular Design – plug in
modules enable easy expansion
and rapid field replacement
Maintenance Backup Feature –
allows for field replacement
without power interruption
Cost Effective – Bulk Power design
offers the most cost effective DC
power method in the industry.
Fully connectorized outputs
reduce installation time and cost
RS-232 Interface
DC Power for
Business-Critical Continuity
Description
The LORAIN® -190V Converter
System is a modular DC to DC bulk
power converter system optimized
to provide reliable, efficient and
cost effective power for the “last
mile” broadband network. The
power system provides a total of up
to 112 output channels. The converter system consists of a single
7RU, 23" Power System Cabinet,
up to 4 DC to DC Converter
Modules, up to 14 8-Channel Line
Card Modules, and a Control and Maintenance Module. Each Converter Module provides
7A at -190VDC output. Each Line Card Module provides eight output channels current
limited to 100 VA and ground fault protected at 5 mA. The discrete Converter and Line
Card Module design allows the user to “pay as you go.” The Maintenance Backup feature
eliminates maintenance issues and service interruptions encountered with other “multi
output” converter solutions. The RS-232 feature allows the user to download current
setup and inventory information as well as system alarms.
Application
The -190V DC to DC Converter Power System is ideal for either new or overlay FTTx
deployments. It can be used in either central office or remote terminal applications.
Ordering Information
Catalog
Number
Part
Number
Description
56670090001
HSB80JBCAB Power System Cabinet, Class B EMI/RFI
56670090002
HSB80JBCAB
Power System Cabinet, Class A EMI/RFI
56670090010
HSB7JBM
Converter Module, -48VDC in, -190VDC out
56670090020
Control and Maintenance Module
56670090030
8-Channel Line Card Module
56670090040
Replacement Maintenance Cable
1
PDS-CONV-070 / February 2007
LORAIN® -190VDC Converter System
-48VDC to -190VDC Bulk Power
Converter Shelf
Height 12.218" (310 mm)
Width 23.00" (584 mm)
Depth 12.00" (305 mm)
Weight 30.0 lbs. (13.6 Kg)
Mounting
23" rack or cabinet
Capacity 14 8-channel Line Card Modules (112 output channels)
4 Converter Modules
1 Control and Maintenance Module
Airflow
Converter Module – forced air, front to back
Rest of the system – natural convection, bottom to top
Temperature Range Storage -40°C to +85°C
Operating -40°C to +65°C
Input Voltage
-48VDC (-42VDC to -58VDC)
Input Connections
4 individual Converter Module feeds, rear mounted
(4)(1 per Converter Module) -48V IN = 2 hole lug –
1/4" studs on 0.625" centers
(4)(1 per Converter Module) -48V RET = 2 hole lug –
1/4" studs on 0.625" centers
(1) GRD = 2 hole lug – 1/4" studs on 1.0" centers
2
Input Current
136.72 total amps
34.18 amps, maximum per Converter Module
Branch Circuit Protection
40 amps, 1 fuse/breaker per Converter Module
Output Voltage
-190VDC (-189.5VDC to –190.5VDC)
Output Connections
(3) 16-pin 2-row male connector (3) 50-pin 2-row male connector
Output Power
112 x 100 VA limit per output channel, 0.526 mA
5 mA ground fault protection per module
Alarm Connections (1) 9 circuit mini mate-n-lock connector, (2) form “C” contacts
- Minor Alarm
- Major Alarm
Regulatory UL/cUL 60950-1
NEBS Level 3 compliant
Telcordia GR-63 CORE compliant
Telcordia GR-1089-CORE compliant
FCC Part 15, SubpartB, Class A
FCC Part 15, SubpartB, Class B
IEC60950-21
EN55022 Class A
EN55022 Class B
DISCONTINUED
PRODUCT
PDS-CONV-070 / February 2007
LORAIN® -190VDC Converter System
-48VDC to -190VDC Bulk Power
Line Card Module
Converter Module
Height 6.05" (154 mm)
Width 4.95" (126 mm)
Depth 10.90" (277 mm)
Weight 11.00 lbs. (5 Kg)
Capacity
4 Converter Modules per shelf,
hot swappable
Airflow
Forced air, front to back
Temperature Range Storage -40°C to +85°C
Operating -40°C to +65°C
Input Voltage
-48VDC (-42VDC to -58VDC)
Input Current
34.18 amps, maximum per module
Output Voltage
-190VDC (-189.5VDC to -190.5VDC)
Output Power
1300W per Converter Module, 7A
Protection
Over temperature protection
Output overload protection
Input over-current protection
Low input voltage inhibit
Input reversal protection
Regulation
±0.5VDC from -42VDC to -58VDC
±0.5VDC from no load to full load
Thermal Load
170 watts per Converter Module
(worst case)
Efficiency
90% typical
Indicators
LED on front of each converter module
Output okay = green LED
Converter fail = red LED
DISCONTINUED
PRODUCT
PDS-CONV-070 / February 2007
Height 5.65" (144 mm)
Width
0.85" (22 mm)
Depth
8.90" (226 mm)
Weight
6.8 oz. (193 g)
Capacity
14 Line Card Modules per shelf,
hot swappable
Airflow
Natural convection, bottom to top
Temperature Range Storage -40°C to +85°C
Operating -40°C to +65°C
Output Voltage
-190VDC (-189.5VDC to -190.5VDC)
Output Power
100 VA limit per module, 0.526 mA
5 mA ground fault protection
per module
Protection
Over temperature protection
Output over-current protection
Output ground fault protection
Regulation
±0.5VDC from -42VDC to -58VDC
±0.5VDC from no load to full load
Indicators
8 LED on front of each Line Card Module
Output okay = green LED
Ground fault = flashing red LED
Over-current fault = flashing green LED
Converter fail = red LED
Controls
Controls located on the front of each
Line Card Module
Ground Fault Reset switch
Output ON/OFF switch
3
LORAIN® -190VDC Converter System
-48VDC to -190VDC Bulk Power
Control and Maintenance Module
Height
9.75" (248 mm)
Width
1.20" (30.5 mm)
Depth
8.90" (226 mm)
Weight
13.6 oz. (386 g)
Capacity
1 per shelf
Airflow
Natural convection, bottom to top
Temperature Range Storage -40°C to +85°C
Operating -40°C to +65°C
Connections
(1) 9 pin sub-d connector for RS-232
Indicators
Indicators are located on the front of Control and Maintenance Module
Converter minor alarm = red LED
Converter major alarm = red LED
Controls
Controls are located on the front of Control and Maintenance Module
LED Test switch
Maintenance Function
Output Voltage
-190VDC (-189.5VDC to -190.5VDC)
Output Power
100 VA limit per module, 0.526 mA
5 mA ground fault protection per module
Protection
Over temperature protection
Output over-current protection
Output ground fault protection
Regulation
±0.5VDC from -42VDC to -58VDC
±0.5VDC from no load to full load
Indicators
8 LED on front of Control and Maintenance Module
Output okay = green LED
Ground fault = flashing red LED
Over-current fault = flashing green LED
Converter fail = red LED
Controls
Controls located on the front of Control and Maintenance Module
Ground Fault Reset switch
Output ON/OFF switch
Emerson Network Power.
The global leader in enabling
business-critical continuity.
© 2007 Emerson Network Power Energy Systems,
North America, Inc. All rights reserved.
Emerson Network Power Energy Systems
1122 F St. Lorain, OH 44052
Toll Free: 800-800-1280 (USA and Canada)
Telephone: 440-246-6999 Fax: 440-246-4876
Web: EmersonNetworkPower.com/EnergySystems
4
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
This publication is issued to provide outline information only which (unless agreed by Emerson Network Power Energy Systems, North
America, Inc. in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a
representation relating to the products or services concerned.
Emerson Network Power Energy Systems, North America, Inc. reserves the right to alter without notice the specification, design or
conditions of supply of any product or service.
The Emerson logo is a trademark and a service mark of Emerson
Electric Co. Emerson Network Power is a division of Emerson
Electric Co. Vortex®, Candeo™ and LORAIN® are trademarks of
Emerson Network Power Energy Systems, North America, Inc.
Printed in USA
DISCONTINUED
PRODUCT
PDS-CONV-070 / February 2007
Download