Avoid long outages with an efficient maintenance concept Service Solutions Instrumentation, Controls & Electrical Preventive Maintenance Overhaul Support Outage times during turbine inspection and over-hauls can be put to good use for maintenance work on the electrical and I&C systems. Siemens specialists coordinate all of the work to reduce maintenance costs to a minimum and to quickly bring the power plant back on line. Your Benefits ■ Cost savings with perfect coordination of all maintenance groups ■ Power plant is quickly back on-line after the inspection and overhaul ■ Direct access to highly qualified and experienced personnel directly from the OEM The Task Plant management and the protection of both plant components and personnel are key aspects of the operation of a power plant. Regular over-hauls of the turbines as well as of the electrical and I&C systems are planned to prevent unscheduled outages and the associated high costs. Our Solution Siemens offers comprehensive inspection and maintenance services for its I&C systems, including field engineering for both our own and third-party electrical components, tailored to the typical outage times for major and minor turbine inspection and overhauls. Siemens plans and performs all of the work during the turbine inspection and overhaul, making optimum use of outage time and reducing the costs for maintenance measures to a minimum. Our specialists perform all work on the mechanical, electrical and I&C system components personally – with optimum coordination of scheduling and logistics with the turbine inspection and overhaul. They supervise all activities through to their conclusion and ensure that gas and steam turbines can return to reliable service at the planned deadline. Siemens is the sole supplier worldwide that has all-round experience in the fields of both electrical and I&C systems as well as the requisite process engineering expertise. We support you in all inspection services to keep all of your I&C, field devices and electrical system components at peak performance, integrating your own resources in the optimum inspection sequence. Optimum use of outage times: Scheduling and logistics of electrical and I&C service are harmonized with the turbine inspection. Answers for energy. Published by and copyright © 2012: Siemens AG, Energy Sector Freyeslebenstrasse 1 91058 Erlangen, Germany For more information contact service4plants.energy@siemens.com www.siemens.com/energy/service4plants Siemens Energy, Inc. Instrumentation, Controls, & Electrical 1345 Ridgeland Parkway, Suite 116 Alpharetta, GA 30004, USA SVPM14_FS_Overhaul_e_V5-0 Order No. E50001-G230-A154-X-4A00 Printed in Germany Dispo 05401, c4bs-Nr. 7820 Printed on elementary chlorine-free bleached paper. All rights reserved. Trademarks mentioned in this document are the property of Siemens AG, its affiliates, or their respective owners. Subject to change without prior notice. The information in this document contains general descriptions of the technical options available, which may not apply in all cases. The required technical options should therefore be specified in the contract.