An Application Guide From the Experts in Business-Critical Continuity™ Full Facility Surge Protection – Point of Use Applications Application Guide Dangerous power disturbances can exist anywhere in a facility. In fact, a large portion of transients are generated by equipment from within a facility. Installing surge protection at the electrical service entrance and distribution panels are prudent choices and highly recommended by Emerson Network Power, however, in most cases these choices don’t go far enough in securing overall power quality protection for individual pieces of equipment operating within a building. In order to be fully protected, we strongly recommend surge protection be installed at specific sensitive loads and in areas exposed to external transients. AC Power – Point of Use A low exposure environment can include both business and residential office settings, anywhere where computers, faxes, TVs, satellite dishes, etc are plugged into an AC outlet and susceptible to power quality issues such as extreme power surges from a lightning strike. The PSS PRF1080 professional series provides protection for eight standard receptacles, with the PSS NET1080T Network Series providing protection for eight standard receptacles along with phone line protection. The angled plug allows connection of the surge protector without covering the other wall outlet. PSS Series The Islatrol™ SP-6TVN provides protection for six standard receptacles accommodating tight spaces due to rotating, repositionable outlets and small, flexible design. It has an operational status indicator light, which alerts for improper wiring/grounding, along with cables for telephone, video, and data line protection. Type of Device Part Number Corded – Power protection only PRF-1080 Corded – Power and phone NET-1080T Plug in outlet – Power/Cable/Phone/Data SP-6TVN Islatrol™ SP-6TVN Rackmount Protection Rack mounted surge suppressors offer a high-density method of terminating multiple inputs and outputs of sensitive electronics in equipment rooms. This reduces cost, space and time involved with the installation. In addition, rack mounting also provides a convenient single-point ground. The Islatrol™ RM-120-10RM rackmount surge protector provides 10 protected receptacles on the back and two protected convenience receptacles on the front of the unit. The devices supply 40 kA of surge protection and up to 60 dB of high-frequency noise filtering. The frontmounted digital meter monitors the voltage, current and power of the protected equipment. Type of Device Part Number 120V Power (12 sockets) with metering Camera’s – Head end (up to 16 Coaxial Cables) Power over Ethernet (16 channel) – RJ-45 Power over Ethernet (48 channel) – RJ-45 RM-120-10RM RM-CX06-16R RM-CAT6-16POE RM-CAT6-48POE Islatrol™ RM-120-10RM Rackmount Protection The Edco™ RM-CX06-16R 16-channel rack mount coax protector implements three-stage hybrid technology. It addresses overvoltage transients with a primary Gas Discharge Tube (GDT), and secondary Silicon Avalanche Diode (SAD) components. Sneak and fault currents are mitigated with solid-state resettable fuses— PTCs. Designed in accordance with NFPA 780 requirements, with up to 20kA of surge current capability. The Edco™ RM-CAT6-POE Series is a multi-channel high-speed data line protector that utilizes a three-stage hybrid design technology. This unit addresses high-energy voltage transients that can damage expensive computer equipment. Ideal for network switches and hubs, the Edco RMCAT6-POE Series is easily mounted in close proximity to the protected equipment. Edco™ RM-CX06-16R Edco™ CAT6-48POE Parking Lot / Street Lighting Protection Parking lot lighting, because of their high exposure to weather conditions, should have protection installed. The Edco™ SHAS Series easily installs directly inside a light pole, it’s manufactured in a weather-tight enclosure and provides line and neutral to ground protection. Parking Lot / Street Light Pole Part Number Mount inside pole – 120V Mount inside pole – 240V Mount inside pole – 277V Mount inside pole – 480V SHAS-120 SHAS-240 SHAS-277 SHAS-480 Edco™ SHAS Series IEEE Standard IEEE Standard 1100 Section 8.6.4 “… it is recommended that additional surge protective devices of listed Category “B” or Category “A,” as specified in IEEE Std C62.41-1991, be applied to downstream electrical switchboards and panelboards, and panelboards on the secondary side of separately derived systems if they support communications, ITE, signaling, television, or other form of electronic load equipment.” 100 Emerson Parkway Binghamton, NY 13905 P (607) 721 8840 P (800) 288 6169 F (607) 722 8713 E contactsurge@emerson.com AG-22016 Rev. 1 1/13 EMERSON NETWORK POWER SURGE PROTECTION INC MAY UPDATE OR REVISE PRICING AND PRODUCT INFORMATION AT ANY TIME PRIOR TO RECEIPT AND ACCEPTANCE OF A CUSTOMER ORDER. SUCH UPDATES OR REVISIONS SHALL BE COMMUNICATED ELECTRONICALLY TO CURRENT REPRESENTATIVES. DAYS TO SHIP MAY VARY DUE TO SIZE OF ORDER. ADDITIONAL PRODUCT DESIGNS ARE AVAILABLE, PLEASE CONTACT THE FACTORY FOR ASSISTANCE.