Havis-Shields Equipment Corp.
Table of Contents
CONSOLES
Angled Series Consoles (AS Series)
C3 - C12
Angled Series Console Housings
C4 - C5
Angled Series Crown Vic Packages
C6
Angled Series Impala Packages
C7
Angled Series Intrepid Packages
C8
Angled Series (AS Specific) Options & Accessories
C9-12
Combo Boxes (Combination Armrest/Storage/Power Outlets)C9
Cup Holders
C10
Monitor & Keyboard Mounts
C11-C12
Wire Cover Panels
C11-C12
Enclosed Consoles (C Series)
C13 - C19
C-800 - C-3011 Enclosed Consoles
C14 - C17
C-Series Full Size Light & Medium Truck Consoles
C17
C-Series Consoles W/Trak-Mount Extension
C18 - C19
Vehicle Specific Consoles (VS Series)
C20 - C23
Ford Crown Vic, Dodge Durango
C21
Dodge Durango (continued), Ford Explorer
C21
Ford F-150, Ford Expedition, and GM (Silverado, Yukon, Tahoe, Suburban)
C23
Equipment Brackets & Filler Plates
C24 - C33
AS, C & VS Series Console Options & Accessories
Armrests, cup holders. lighter outlets, map lights
Accessory Pockets and Mic Clips
Switch Boxes
Storage Boxes
Console Mounting Kits & Brackets
C34 - C44
C34 - C38
C39
C42 - C43
C43 - C44
C55 - C59
COMPUTER MOUNTS
Trak-Mount Mounting Bases (TM Series)
12” - 32” TM-Series Bases
TM-Series Vehicle Specific Kits
TM-Series Accessories & Universal Computer Mounts
Console Mounting Kits & Brackets
Gas Shock Computer Mounts (GS Series)
Telescoping Computer Bases (TCB Series)
TCB-Series Bases
TCB-Series Laptop Mounts, Tilt & Swivel Brackets
Computer Specific Mounting Systems
Motorola, Panasonic
Data 911
Printer, Modem,Scanner (Peripherals) & Mounts
Computer Mounting Accessories
Air Bag Switches
C45 - C54
C46 - C47
C48
C49 - C54
C55 - C59
C60
C61 - C84
C62 - C67
C68 - C70
C71 - C84
C71 - C77
C78
C80
C81 - C84
C84
RADIO TRAYS
Trunk Mounted Radio Trays
Consolidator Replacement Parts & Accessories
Motorcycle Communication Boxes
C85 - C87
C88
C89
Glossary of Consolidator Terms
®
•
•
•
•
•
•
•
•
•
•
•
•
Bail Bracket – “U” shaped bracket (Trunion)
Equipment Bracket – Mounts control head into console
External Mount – Mounts to outside of console
Extrusion – Heavy duty rail with special slots
Filler Plate – Blank panel fills empty space in console
Hat Bracket – Hat shaped adaptor bracket
Hump Bracket – Floor mount bracket
Internal Mount – Mounts inside console
MTF – Mount to floor
N/A – Not available
Swivel – Turns or adjust side to side
Tilt – Adjusts angle
How to build your mobile office
Determine what equipment you have.
• Make & model
• Computer
• Radio
• Siren
• Etc.
Consolidator® Order Form
Vehicle Application Guide
Vehicle Application
Guide Question
Does Havis-Shields offer a mount kit for a 2004 Ford
Escape?
Vehicle Application
Guide Question
Does Havis-Shields offer a mount kit for a 2004 Ford
Escape?
Stout Mount Console
Stout Mount Console
Stout Mount Console
Stout Mount Console
Stout Mount Options
Stout Mount Options
Stout Mount Options
Angled Consoles
C-CB-1-3610-ARM
Combination box with removable hinged arm
rest, printer mount, and (3) three lighter plug outlets
• 6” wide x 9” deep
• Lighter outlets include 15 amp in-line fuse
and wire harness
• 16 gauge formed steel housing with
extruded aluminum top frame
• Designed to mount behind AS console to
Trak-Mount base or any flat surface
• No vehicle mounting kit required
• Recommended for Trak-Mount mounting
See HS-Supplement
Angled Series Consoles Installation Instructions
Models C-AS-1060, 1025, 1325, 1525 & 1725
TOOLS REQUIRED:
Standard and Metric socket set with 6”extension.
Standard and Metric wrench set
#20 and #15 Torx driver
Trak Mounted
HARDWARE:
•
8 GSM 33001
•
8 GSM 31005
•
6 GSM 31026
•
8 GSM 30005
Hex head cap screw ¼-20 x ¾”
Flat washer ¼”
Lock Washer ¼”
Hex nut ¼-20
INSTALLATION:
1.
Remove front seat mounting bolts near transmission hump. Loosen outboard bolts.
2.
Place Hex head cap screws ¼ - 20 x ¾” into under side tracks of trak mount and
3.
Position trak mount in desired location before tightening down hump mount.
4.
Mount rear hump brackets to under side of trak.
5.
Place trak with positioned hump mount brackets over transmission hump and onto
front and rear seat mount studs. Place seat bracket on top of hump mount brackets
and replace seat mount bolts.
6.
Slide console up to dash and secure to trak mount with 1/4” hardware.
7.
Unit is ready to accept equipment heads.
2/3
4
5
6
2/3
4
Hump Bracket Mounted
HARDWARE:
•
4 GSM 32009
•
4 GSM 31320
•
4 GSM 31006
•
4 GSM 30017
Carriage bolt 5/16-18 x ¾”
Retaining nylon washer
Flat Washer 5/16”
Nylock nut 5/16-18
INSTALLATION:
1.
Remove front seat mounting bolts near transmission hump
2.
Place Carriage bolts into slots from underneath to top of hump mount bracket
and place nylon retaining washer on bolt on top side to hold in place.
3.
Place hump mount bracket over transmission hump and onto seat mount studs,
place seat bracket on top of hump mount bracket and replace seat mount bolts.
4.
Place console on hump bracket and secure with 5/16” flat washer and nylock nut.
5.
Unit is ready to accept Equipment heads
NOTE: Models C-AS-1025 & 1060 must be mounted on trak-mount in the Impala.
Angled Series Question
What is the #1 selling feature of an Angled Series
Console?
Enclosed Consoles
C Series (Enclosed) Consoles
•
•
•
•
•
Many sizes available
Original extrusion design
Wide variety of accessories
Very adaptable
Attractive & effective
C Series Question
What is the unique design feature of the C-Series console?
C/TM Series
Assembly and installation instructions
for C Series and C/TM Series console
This model requires drilling holes in floor. It is designed so that it will not interfere with air ducts, wire harnesses, hoses, etc. However, we
recommend that you CHECK UNDER CARPET AND FLOOR for proper clearance before drilling holes.
Step 1. Remove the front seat-mount bolts closest to the transmission hump.
Place the hump-mount bracket over the hump and align the holes.
Place the factory seat bracket over top of the newly added hump-mount bracket
base. Replace all seat-mount hardware and tighten.
WE RECOMMEND attaching the bail bracket or Trak-Mount base to the humpmount bracket prior to hump installation.
Step 2. Bolt the bail bracket to the hump-mount bracket using 1/4” hardware
supplied. Adjust to center of seats and tighten.
Step 3. Bolt rear L bracket to rear of console with 1/4” x 3/4” screws and serrated
nuts. (Do not tighten). Slide console in between bail brackets. With four (4) 1/4” x
1/2” screws and flat/ split washers, bolt console to bail bracket using 1/4” nuts
already in lower track. Adjust console into desired position and tighten all screws.
Using 1/4” x 3/4” self-tapping screws, fasten rear L bracket to transmission hump.
IMPORTANT! USE ONLY FACTORY SUPPLIED HARDWARE.
Step 4. After selecting correct filler plates and equipment mounting brackets, bolt
equipment heads to brackets.
A. Spacers may be needed for some heads to achieve
8-5/8” equipment bracket flange width. (See equipment
bracket illustration at bottom).
B. Most bracket sets have pre-determined equipment
head mounting holes. Installer can drill new holes if a
different location is desired.
Step 5. Complete all wiring making sure enough wire is used
so components can be removed from console for servicing.
Step 6. Insert equipment heads with equipment brackets into
console. Use # 8 x 3/8” T-2 Torx screws.
Step 7. Secure mount screws and all hardware.
C/TM Series (Enclosed with
Trak-Mount) Consoles
•
•
•
•
Provides safest laptop computer mounting
Combines enclosed and Trak designs
Excellent adjustability
Heavy duty extrusion
C-TM Question
What is the most important feature of the C/TM Series?
Vehicle Specific Consoles
C-VS-1600-EXPL
Vehicle Specific Consoles
C-VS-2400-CHGR
Vehicle Specific Consoles
C-VS-1000-TAH
Vehicle Specific Consoles
C-VS-1000-IMP-1
Vehicle Specific Consoles
C-VS-700-EXPL
C-VS-1100-F150
C-VS-1200-EXPL
C-VS-1200-EXPD
Vehicle Specific Consoles
C-VS-3011-DUR
C-VS-1200-GM
C-VS-1200-DUR
VS Series (Vehicle Specific)
Consoles
•
•
•
•
Custom fit
Accepts standard accessories
Limited space
Very popular
Vehicle Specific Question
How many VS consoles does Havis-Shields offer?
C-Series Equipment Brackets
Limited availability for one-piece brackets – see part numbers that end with –1P
Accessories
C-AP
C-ARM-3
C-ML-MCB
C-CH-2-XL
Equipment Brackets & Accessories
•
•
•
•
•
Large variety
One or two piece equipment brackets
EB – Bend your own brackets available
High quality switching
Time tested parts
Accessories Question
The C-AP will fit into how many C-AS Series consoles?
A. Two
B. Four
C. Five
Trak-Mount
Assembly & installation instructions
for Trak-Mount (TM Series) mounting base
Step 1. Remove the front seat-mount bolts closest
to the transmission hump. Place the hump-mount
bracket over the hump and align the holes
Step 2. Make sure Trak-Mount is bolted in desired
position before bolting down hump-mount bracket.
Step 3. Place 1/4” x 1/2” hex head cap screws into
the bottom outer tracks and lightly fasten down the
equipment mounting brackets.
Step 4. Bolt equipment heads to brackets.
Complete all wiring. Use enough wire so
components can be removed from console.
Step 5. Insert equipment heads with #8 x 3/8” T-2
Torx screws. Secure seat-mount bolts and all
hardware.
Material list
1 1
Trak-Mount extrusion-10, 12, 15,
18, or 24-inch standard length
2 1
Hump-Mount bracket
Hardware list for hump-mount bracket
3 4
Hex head cap screws 1/4” x 3/4” GSM33001
4 4
Hex nuts 1/4” GSM30005
5 4
Flat washers 1/4” GSM31005
6 4
Lock washers 1/4” GSM31026
TM Series (Trak-Mount)
•
•
•
•
•
Sturdy
Economical
Lots of Adjustment
Limited Accessories
New floor Traks available for:
– 2004 Explorer
– 2004 Expedition
– 2000-2004 Tahoe, Suburban, Yukon, Yukon XL,
Silverado, and Sierra pick-ups
– 2004 Durango
Trak Mount Question
How many armrests can be mounted directly to a TrakMount?
What are the part numbers?
TCB (Telescoping Computer Base)
TCB (Telescoping Computer Base)
TCB (Telescoping Computer Base)
Articulating Swivel Arms
Making it easy to position
a computer where you want it.
Made from 1/4” steel to provide
stability.
Locking Knob to set telescoping height
Computer Mounting Platforms
Include fully adjustable mounting brackets
making monitors easily viewable for
driver or passenger via tilt swivel features.
Available for Motorola, Litton, DATA 911,
Panasonic and many other computer
work stations. (Pages C68 - C79)
Gas Shock Mounts
Also Available
(see previous page)
Many TCB Series mounts utilize
factory seat bolts for easy installation
Angled Series & Enclosed Consoles
are compatible with TCB Series to complete
your mounting solution. (see pages C4 - C23)
Assembly & Installation instructions
C-TCB-1 mounting bracket For 1992-1997 Chevrolet Caprice, 1997– 2000 Chevrolet
Lumina, 1995– 2001 Ford Crown Victoria
Step 1. Loosen front and rear passenger seat bolts.
Height closed: 10”
Height fully extended: 16”
Step 2. Slide base of the pole support assembly
under the front inboard (closest to the transmission
hump) seat base. Slide the side brace arm under
the front outboard (closest to the door) seat base.
Step 3. Attach side and forward brace arms to pole
support assembly with 5/16” x 1” screw. (Do not tighten
yet). Align the holes of the seat base, the pole support
assembly, side brace arm, and floor holes. Firmly
tighten all four seat bolts without over tightening.
Step 5. Using two 1/4” x 3/4” self tapping screws, drill
holes and attach lateral (forward) brace arm to vehicle
floor or transmission hump.
Step 6. Tighten the hex head screw that attaches
the brace arms to the telescoping post when finished.
Material list
1
1
1
1
Pole support assembly CM93071-1
Telescoping pole assembly CM93072-1
Side brace arm assembly CM93114-1
Lateral (forward) brace arm assembly CM93135-1
Hardware list
2
1
1
2
Flat washers 5/16” GSM31006
Hex head cap screw 5/16” x 1” GSM33012
Nylock nut 5/16” GSM30017
Self-tapping screws 1/4” x 3/4” GSM33060-1
TCB Series (Telescoping Computer
Base)
•
•
•
•
•
•
Many vehicle specific models
Solves difficult mounting problems
Very adjustable
Can be used with all console models
Welded steel construction
Must attach computer mount
– Pages C68 - C70
TCB Question
What model TCB would you suggest for a C-3010 console?
Gas Shock Mounts
Gas Shock Mounts
•
•
•
•
Mounts to Trak only
Lift assist
Spring pin locking
For special
applications
Computer Mounting
Systems
Computer Mounting Systems
Computer Mounting
Systems
•
•
•
•
•
Universal laptop mounts
Primarily Motorola specific
Safe solutions
Unique items
Some docking stations available
Computer Mounting Question
What is the maximum width laptop that can be used with a
C-3090?
Trunk Trays
C-3190 Crown Victoria
C-3190P Crown Victoria
C-3311 Impala
C-3190 with C-3530-5L
Trunk Tray Installation Instructions
Model C-3190 for 1996 – 2003 Crown Victoria
Step 1. Align forward radio shelf bracket with existing
holes in front of trunk wall. Use 2 (two) 1/4” x 1” hex
head cap screws, 2 (two) 1/4” flat washers and 2
(two) 1/4” flange nuts. Don’t fully tighten bracket yet.
Step 2. Use a block of wood or a shim to level radio
shelf. Drill 1/4” hole into trunk hinge, support base on
driver’s side. Fasten down shelf using 1 (one) 1/4” x
1” hex head cap screw, 1 (one) 1/4” flat washer, and
1 (one) 1/4” flange nut.
Step 3. Insert 2 (two) 1/4” x 1” hex head cap screws
in shelf holes. Place bottom support bracket over hex
head cap screws, then place hanger support bracket
on top of bottom bracket. Place 2 (two) 1/4" flat
washers and 2 (two) 1/4" flange nuts. 1998 Crown
Vic: use pair of holes toward front of vehicle. For
1997 Crown Vic: use holes toward rear of vehicle.
Tools needed: 7/16” wrench and socket, drill and 1/4” bit, level.
Step 4. Using the support as a template, mark and
drill two holes in upper deck. Bolt support bracket on
with 1/4” x 1” hex head cap screws, 2 (two) 1/4” flat
washers, and 1/4” flange nuts. Make sure shelf is
level and tighten all hardware.
Hardware Included: 8 (eight) 1/4” x 1” screws, 8 (eight) 1/4”
flange nuts, 8 (eight) 1/4” flat washers.
Note: Do not substitute hardware. Do not use self-tapping
screws as they will vibrate loose.
Trunk Tray Installation Instructions
Models C-3311 & C-3311-18 for 2001 – 2003 Chevrolet Impala
Step 1. Put complete tray assembly into trunk with 171/2”aluminum leg brackets towards front of vehicle.
Mounting holes on top of front leg brackets will line up with
body cross member in front of trunk.
Note: Prop up rear end of tray.
Step 2. Prior to fastening front leg brackets to body, make sure
brackets are straight up and down (90° to floor).
Step 3. Drill mount holes into body cross member with 3/16”drill
bit and bolt brackets on with 1/4”x 3/4”self tapping screws.
Note: Watch out for wiring for “police package” rear deck lights.
The bottom of front leg brackets just rests on floor.
Step 4. Rear adjustable brackets can now be attached to the
underside of package tray (Also try to keep these brackets
straight). Using 1/4”drill bit, drill through slot in bracket into
package tray.
Note: This hole should be accessible from the pre-existing
oblong hole in package tray so you will be able to use the 1/4”x
3/4”screws, washers and nuts to attach (one on each side). Do
your final side-to-side adjustment and tighten hardware. Using
3/16”drill bit, drill additional hole through a slot in bracket into
package tray. Fasten with 1/4”x 3/4” self tapping screws (one
each side).
Step 5. Your final (up and down) adjustments can now be
made. Level as desired and tighten 1/4”hardware.
Step 6. Attach rubber edge guard to rear lip of tray.
Step 7. You may now mount equipment onto tray.
Final Notes:
A. The slide tray should move smoothly from front to back. The
spring plunger pins should easily lock in when tray is pushed
forward to its locked position. The spring plungers must be pulled
out in order to release and slide out the tray.
Note: The spring plungers have a 1/4turn override that disables
the spring pin.
B. When slide tray is in the “out” position, do not lean heavily on
tray with your body. This may damage the slides.
C. The perforated holes at the front of the tray are used for wire
tying harnesses. All harnesses should exit the tray at the sidesrearward of front aluminum brackets.
Trunk Trays
•
•
•
•
•
Provides additional mounting surface
Easy to service equipment
Simple slide & latch design
14 gauge steel with black powder coat finish
Mounts per Ford 2003 CVPI.com guide lines
Trunk Tray Question
Does the spare tire need to be removed in order to mount a
C-3190P?
Page C89
C-TIR3-IMP Bracket
Questions
•
Does Havis-Shields offer a console for 2001 Ford Escape?
•
What is the #1 selling feature of an Angled Series Console?
•
What makes the C-Series unique from other console brands?
•
What is the most important feature of the C/TM Series?
•
How many VS consoles does Havis-Shields offer?
•
Will a C-AP fit into how many C-AS series consoles?
•
How many armrests can be used with a Trak-mount? Part numbers?
•
What model TCB would you suggest for a C-3010 console?
•
What is the maximum width laptop that can be used with a C-3090?
•
Does the spare tire need to be removed in order to mount C-3190P?
Quiz
• Provide part numbers for installing the
following. The customer has:
–
–
–
–
–
–
Whelen Cencom (# CCSRN)
Motorola MCS 2000 Remote
Map light & 12 volt socket
Dell Laptop
Would prefer AS console
Wants an armrest
Quiz Answers
–
–
–
–
–
C-EB40-CCS-1P
C-EB30-MCR-1P
C-ML-LP
C-3090-2
Recommend C/TM
console
• C-1400TM
– C-ARM-3
–
–
–
–
–
–
C-AS-1325
C-TCB-7
C-ML-LP
C-3090-3
C-TM-CV
C-CB-1
Consolidator Switch Panel
Wiring Diagram
®
C-SB and C-SP-3B (Reverse View)
Material list
1
2
3
4
5
6
7
8
3 ft. 16 gauge wire
28 ft. 14 gauge wire
1
16-14 Nylon ring terminal
GSM 20258
1
16-14 Ring terminal
GSM 20256
3
16-14 gauge female connectors
GSM20224
2
16-14 gauge butt connectors
GSM20208
1
14-amp fuse holder
GSM20153
1
20-amp fuse
GSM20228