Pro/ENGINEER® Foundation XE
The Essential 3D CAD Package
Introduction to Pro/ENGINEER
A Winning Heritage
Pro/ENGINEER is
the market leader
World’s first parametric
CAD solution
(Wohlers 2008 report)
Over 50,000
customers
worldwide
The industry’s only
scalable solution that
addresses both midrange and high-end CAD
market needs
Improves both personal
and process productivity
2
Forward looking information subject to change without notice.
Expanded to a
fully integrated
CAID/CAD/CAM/CAE
solution
Many industry firsts…
web-enabled,
DRM, ECAD-MCAD, etc.
Highest quality solution- the
only CMMI appraised CAD
solution
© 2009 PTC
Pro/ENGINEER Offers Powerful, Integrated 3D CAD/CAM/CAE Capabilities
Conceptual
Design
Surfacing
Rendering
Rights
Reverse
Sheetmetal Assembly
Management Engineering
Cabling
Kinematics
Dynamics
Piping
Human Factors
Schematics ECAD/MCAD
Interface
Structure, Optimization Tolerance
Thermal & Modal
Analysis
Analysis
Prismatic
Machining
© 2008
2D
Layout
Multi-axis
Machining
Forward looking information subject to change without notice.
Turning
Sheetmetal
NC
Tooling
Design
© 2009 PTC
3
Pro/ENGINEER is an Integral Part of PTC’s Product Development System
Best Products
+
Best Integration
4
Forward looking information subject to change without notice.
Only
“No Compromise”
System
© 2009 PTC
The Pro/ENGINEER Strategy is Unique
Traditional CAD Vendor Strategy
Separate products
High-End
3D CAD
Pro/ENGINEER
A Single Parametric
CAD System
Enterprise XE
Pro/ENGINEER
Enterprise SE
Mid-Range
3D CAD
One Platform.
Maximum
AdvancedPower.
XE
Any Size Business
Advanced SE
Foundation XE
Pro/ENGINEER’s single brand strategy and single scaleable architecture
for parametric CAD is unique, simpler and delivers more value.
Forward looking information subject to change without notice.
© 2009 PTC
Why Pro/ENGINEER Foundation XE?
The Key Business Challenge
is the need to accelerate
time-to-market
Our streamlined product
development process
allows you to get your
products out the door
faster!
Manufacturing Phase
Analysis Phase
Concept/Design Phase
Forward looking information subject to change without notice.
© 2009 PTC
Primary Concerns Regarding 3D CAD Tools
Breadth of capabilities
Ease of use
(Implementation time. Learning curve)
Cost
Scalability
Tech Support
Foundation XE
The most affordable, robust 3D
CAD package!
Forward looking information subject to change without notice.
© 2009 PTC
The Benefits of Going 3D
It’s where the world is headed
Your partners, vendors and customers are already using or
transitioning to 3D
But you want to get there at your own pace!
2D and drawings have “staying power” in the product
development process
A smart 3D model makes communications throughout
the product development process more efficient
Because of total compatibility with all standard 2D CAD data
formats, investments in legacy data and systems are protected—
and existing work can be automatically reused in 3D world
Forward looking information subject to change without notice.
Foundation XE
It makes good
business sense to
be ready to go 3D!
© 2009 PTC
Designing in 3D Will Improve Your Bottom Line
Product Profit Margins
21%
higher
Users of
2D CAD
Users of
3D CAD
Source: Aberdeen Group, Best Practices for Migrating from 2D to 3D CAD, May 2008
Small to Midsize Manufacturers
Over
67%
Currently developing half or more
of their product designs in 3D
“Moving from 2D design with AutoCAD® to 3D design with Pro/ENGINEER sped up
our development times by 80%.”
David Barbour, Re-ProcessTechonologies
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER is Easy to Use
Effortless User Experience
Access all of the power of Pro/ENGINEER
in a natural, intuitive manner
Create and modify designs faster and easier
with industry leading, interactive modeling
Spend less time learning the software,
more time designing
“The biggest advantage of Pro/ENGINEER, when compared to other CAD
products, is the ease-of-use”
Benoit Grelier, Scott Sports S.A.
Forward looking information subject to change without notice.
© 2009 PTC
The Most Powerful Yet Affordable Entry-level Package
Interactive
modeling
NC and Tooling
Drawing
Robust
Assembly
Analysis
Foundation XE
Sheetmetal
modeling
Digital human
modeling
Surfacing
Forward looking information subject to change without notice.
Sketching
and
Plus…
more!
© 2009 PTC
Pro/ENGINEER Foundation XE Gives You the Design Edge
Key Benefits
Quickly create great looking products
with innovative shapes that are
unattainable with other mid-range 3D
CAD systems
Increase model quality, promote part
reuse, and reduce model errors
Lower your costs by reducing new
part number proliferation
Instantly connect to information and
resources in PDM systems and on
the Internet – for a highly efficient
product development process
Forward looking information subject to change without notice.
© 2009 PTC
Customers See The Benefits of Pro/ENGINEER
"Pro/ENGINEER Wildfire 5.0 offers a broad range of
enhancements that will help engineers at Exmark
Manufacturing continue to develop long lasting,
cutting edge, commercial turf equipment.”
“Enhancements such as dynamic feature editing,
disruption free design, weldment design, assembly
enhancements and other user experience
enhancements will continue to allow us to design
industry leading, highly innovative products such as
our Next Lazer Z®."
Brian York, Engineering Process Improvement Specialist
Exmark Manufacturing, a division of The Toro Company
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER vs. SolidWorks Customer Benchmark
Scenario
Experienced users driving both tools
Solidworks
Pro/ENGINEER
5452
Identical models built from scratch
Travel (ft)
3068
Measured time, mouse picks, and
mouse travel
10195
Clicks
360
Pro/ENGINEER comes out on top!
Less time to model, fewer mouse
picks, less mouse travel
7219
Time (min)
273
This was a fairly simple model and the
differences started to show; imagine
the results on a more complex design
task


Benchmark by Tool Inc.
December 2008

Forward looking information subject to change without notice.
Modeled in Pro/ENGINEER in 25% less time!
30% fewer clicks!
44% less mouse travel!
© PTC
2009 PTC
© 2009
Industry-leading, Comprehensive Package of Maintenance Benefits
• 24 x 5 Phone Support – 2 hour response
• “Live” Remote Desktop Diagnostics
• Software fixes
• Automatic notification of new releases
• 24 x 7 Web support tools
• “Live” & recorded interactive
• Discounted software upgrade packages
• Business Asset Summary Web Tool
• Dedicated Technical Support Engineer
• Weekend Support
• Technical Support Account Manager
• Extended Support (for eligible products)
Tips & Techniques sessions
Forward looking information subject to change without notice.
• Online tutorials for web support tool usage
• Product and support email alerts
• Discounts from PTC partners via
“Gold Loyalty Discount Program”
2009 PTC
© 2009©PTC
Pro/ENGINEER® Is The Gold Standard In 3D CAD/CAM/CAE Software
Easy to learn and use
Fast implementation
Immediate
Value
Affordability
– Same price as
basic mid-range
3D design tools
Long-Term
Value
Foundation XE
Unlimited scalability
– The industry’s only
scalable product
development
platform
Powerful functionality
Flexibility
In-Depth
Tech Support
Extensive online resources and information
Complete library of parts, features and tools
– Download predefined parts and symbols
Forward looking information subject to change without notice.
© 2009 PTC
Thank you!
Pro/ENGINEER® Foundation XE
Back-up Slides
Pro/ENGINEER Data Management Compatibility
Pro/ENGINEER
Wildfire 2.0
Pro/INTRALINK
3.4
Windchill
PDMLink /
Pro/INTRALINK
8.0
Windchill
PDMLink /
Pro/INTRALINK
9.0
Windchill
PDMLink /
Pro/INTRALINK
9.1
Windchill
ProductPoint
Compatible
Compatible
No Compatibility
Planned
No Compatibility
Planned
No Compatibility
Planned
No Compatibility
Planned
Pro/ENGINEER
Wildfire 3.0
Compatible
Compatible
Compatible
Compatibility Planned
(as of Windchill 9.1
FCS, and likely with
Pro/ENGINEER
Wildfire 3.0 M180)
CQ4 2008
Pro/ENGINEER
Wildfire 4.0
Compatibility
Planned (as of
Pro/INTRALINK 3.4
M062, and
Pro/ENGINEER
Wildfire 4.0 M062)
Feb 2009
Compatibility Available
(as of Windchill 8.0
M050, with
Pro/ENGINEER
Wildfire 4.0 F000)
Compatible
Compatibility Available
(as of Windchill 9.0
M030, with
Pro/ENGINEER
Wildfire 4.0 M020)
Compatible
Compatibility Planned
(as of Windchill 9.1
FCS, with
Pro/ENGINEER
Wildfire 4.0 M060)
CQ4 2008
Compatibility
Planned
(Windchill
ProductPoint FCS,
with
Pro/ENGINEER
Wildfire 4.0 M060)
CQ4 2008
Compatibility Planned
With Pro/ENGINEER
Wildfire 5.0 F000
Compatibility
Planned
With Windchill
ProductPoint 1.1
AND
Pro/ENGINEER
©
Wildfire 5.0 MOR
Pro/ENGINEER
Wildfire 5.0
18
No
Compatibility
Planned
No
Compatibility
Planned
No
Compatibility
Planned
Forward looking information subject to change without notice
Forward looking information subject to change without notice.
2006
Pro/ENGINEER Packaging Overview
Simulation & Analysis
Engineering Calculation
Tolerance Analysis
Digital Rights Management
Collaboration, Project
Management
Extended Design Add-ons
Free-form Surfacing
Top-Down Design
Piping and Cabling
Mechanism Dynamics, etc.
One Add-On
All Add-On Incl.
Product Data
Management
.
3D CAD Design
Advanced Modeling,
Drawing, Assembly,
Sheetmetal, etc
Pro/ENGINEER Pro/ENGINEER Pro/ENGINEER Pro/ENGINEER Pro/ENGINEER
Foundation
Advanced
Advanced
Enterprise
Enterprise
XE
SE
XE
SE
XE
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER Advanced SE (Standard Edition)
Simulation & Analysis
Engineering Calculation
Tolerance Analysis
Digital Rights Management
Capabilities
Pro/ENGINEER Foundation XE
– Powerful 3D CAD capabilities
Collaboration, Project
Management
Extended Design Add-ons
Free-form Surfacing
Top-Down Design
Piping and Cabling
Mechanism Dynamics, etc.
Pro/INTRALINK, Windchill PDMLink or Windchill
ProductPoint
– Robust and comprehensive data management
PTC University Web-based Training
– Access to online training resources on data
management for Pro/ENGINEER
– One-year subscription
Product Data
Management
3D CAD Design
Advanced Modeling,
Drawing, Assembly,
Sheetmetal, etc
Typical Uses
Small or dispersed teams
Need data management and collaboration capabilities
Low-medium complexity design processes
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER Advanced XE (Extended Edition)
Simulation & Analysis
Engineering Calculation
Tolerance Analysis
Digital Rights Management
Capabilities
Pro/ENGINEER Foundation XE
Choice of data management options
Collaboration, Project
Management
Extended Design Add-ons
Free-form Surfacing
Top-Down Design
Piping/Cabling
Mechanism Dynamics, etc.
Product Data
Management
– Pro/INTRALINK, Windchill PDMLink or Windchill
ProductPoint
Plus choice of high performance module
– Pro/ENGINEER Advanced Assembly
– Pro/ENGINEER Behavioral Modeling
– Pro/ENGINEER Interactive Surface Design
– Pro/ENGINEER Mechanism Dynamics
– Pro/ENGINEER Piping and Cabling
3D CAD Design
Advanced Modeling,
Drawing, Assembly,
Sheetmetal, etc
Typical Uses
Increased collaboration needs
Extended design requirements
Process optimization
*On Demand available for an additional fee
Forward looking information subject to change without notice.
Medium-high complexity products and design processes
© 2009 PTC
Structured Product Development Process
PTC’s Quality Management System
Enables PTC to:
Requirements
Validation
Root
Cause
Analysis
PDS System
Testing
Voice of the
Customer
Quality
Analysis Tools
Business
Process
Analysis
PDS Integral
Architecture
Authority
Protocol
Process
Process
Systematic
Defect Reduction
• Listen to our customers • Deliver products
that are superior in
quality, performance
Service
Independent
Level
Project Quality
and usability
Agreements
Assessment
Automated
Testing
Maintenance
Production
Test
Pre-Packaged
Deployment
Services
Customer
Satisfaction
Survey
Management
Escalation
Process
Increased QA
Ratios
Maintenance
Release
Discipline
Business
Process
Guides
Product
Development
Consulting
Services
Service Level
Agreements
Software Engineering Process
Capability Maturity Model Integrated
Services & Support Process
ISO 9001 Certified Support
Quality Steering Committee
Services Portfolio Steering Committee
Governance Framework
Plan
Develop
Test
Forward looking information subject to change without notice.
Maintain
Deploy
Optimize
Support
© 2009 PTC
Pro/ENGINEER Wildfire 5.0 Further Improves Quality
Continued “Institutionalization” of Quality
Ongoing tightening of release criteria
– QA Coverage 200% Better than Pro/ENGINEER Wildfire 4.0
– Mean Time to Failure (defect) 26% Better than Pro/ENGINEER
Wildfire 4.0
Continued process improvement
Development and implementation of “holistic” release
criteria
– No longer purely “metric” driven
– Encompassing more user experience requirements
Targeting of Quality Through Specific Increased development productivity: 12%
increase over Pro/ENGINEER Wildfire 4.0
Development Projects
Trail sandbox
Warm restart
The only CAD development team to
achieve CMMI Level 2 quality appraisal
Infrastructure development tasks
26% MTTX increase over Pro/ENGINEER
Wildfire 4.0
“Quality cannot be tested into a product, it has to be designed into it.”
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER Foundation XE Key Capabilities
Interactive solid modeling
Create precise geometry, regardless of
model complexity
Automatically dimension sketches for
fast, easy re-use
Create and modify designs faster with
industry leading, dynamic preview,
robust direct editing and intelligent
feature creation including Auto Round,
patterning, mirroring, etc.
Create part variants using family tables
Validate designs using ModelCHECK.
– Ensure compliance with industry standards and
company best practices
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER Foundation XE Key Capabilities
Detailed documentation including 2D
and 3D drawings
Easy to use ribbon-based user interface
helps you navigate commands faster
and easier
Create 2D drawings according to
international standards, including ASME,
ISO, and JIS
Create an associative BOM and
associated balloon notes automatically
Create 3D drawings according to ASME
and ISO standards
Easily create mixed views with
photorealistic images
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER Foundation XE Key Capabilities
Assembly modeling
Enjoy robust, fast assembly
modeling performance
Quickly create lightweight,
simplified representations of
assemblies ‘on the fly’
Share lightweight, yet fully
accurate model representations
using the unique Shrinkwrap™
tool
Use AssemblySense™ to embed
fit, form, and function knowledge
to create assemblies quickly and
correctly
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER Foundation XE Key Capabilities
Sheetmetal modeling
Create walls, bends, punches, notches,
forms, and reliefs using the streamlined user
interface
Mirror and Pattern walls to quickly create
symetrical or repetitive designs
Dynamically preview design modification
Automatically generate flat and flange wall
patterns from 3D solid geometry
Use a variety of bend allowance calculations
to create flat patterns of the designs
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER Foundation XE Capabilities
Robust Surfacing and Graphical Realism
Develop complex surface geometry using
sweeps, blends, extends, offsets, and a
variety of other specialized features
Trim/extend surfaces using tools like extrude,
revolve, blend, and sweep
Perform surface operations such as copy,
merge, extend, and transform
Revolutionary Warp technology lets you make
global deformations on geometry and stretch,
bend and twist models
Create accurate, photorealistic images of
products quickly even with large assemblies.
Make dynamic geometry changes while
maintaining effects such as shadows,
reflections, textures, etc.
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER Foundation XE Key Capabilities
Mechanism Design and Animation
Assemble parts and sub-assemblies
using true mechanical connections (pin
joints, ball joints, sliders) to create a
realistically moving assembly
Support for gears, belts and slot motors
Drag the mechanism though its motion
envelope, preventing interference and
detecting clashes
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER Foundation XE Key Capabilities
Weldment Design Optimization
Create weldment designs faster and
easier with the streamlined user
interface for creating welds (spot,
plug, fillet, slot, groove, etc.)
Easily define joining requirements
Extract valuable information for the
model such as mass properties,
clearance, interferences and cost data
Easily product complete 2D weld
documentation
Forward looking information subject to change without notice.
© 2009 PTC
Advanced Modeling Capabilities in Pro/ENGINEER Foundation XE
Digital Human Modeling: Manikin Lite
Any Pro/ENGINEER user may load, place, edit placement and
manipulate a manikin in the scene, with the following limitations:
– Limited tools for manipulation (2D drag and apply posture only)
– No ergonomics analysis; no reach envelope; no vision cones and
no vision window
– No ability to save designs that include a Manikin
Expert Framework Design: EFX Lite
Example frame built using EFX
Lite
All EFX commands are accessible
– Full user experience
Full access to library of parts
Upgradeable to the full version
Limitations per assembly or Pro/ENGINEER session
– 20 beams and/or connection elements, 10 screws and/or dowels
– Import / Export to neutral interfaces disabled
Forward looking information subject to change without notice.
© 2009 PTC
Analysis Capabilities in Pro/ENGINEER Foundation XE
Structural Analysis: CAE Lite
Guiding interface walks users through model setup
– Static Structural Analysis for Parts and Assemblies
– Apply Loads and Constraints (Displacement, Pin, Ball, Planar)
– Full results functionality
• Results Probing, Animation, etc…
Leverages Pro/ENGINEER Mechanica technology
Complete upward model compatibility to the full version of
Pro/ENGINEER Mechanica
Electromechanical Analysis: Spark Analysis Lite
Provides the ability to analyze electrical creepage
– Between two selected parts or quilts
– Clearance analysis disabled
Complete upward model compatibility to the full version
Forward looking information subject to change without notice.
© 2009 PTC
Machining Capabilities in Pro/ENGINEER Foundation XE
CAM Lite
Basic 2 ½-axis milling capabilities,
allowing machining of prismatic parts in
5-axis positioning
Intuitive UI that is completely icon/dialog
driven (no menu manager)
Provides a generic (Fanuc) GPOST, so
that the user can see example G-Code
output; only CL file output
Specific GPOST can be purchased from
AustinNC or other vendors
Forward looking information subject to change without notice.
© 2009 PTC
Pro/ENGINEER Foundation XE Sets the Standard for Interoperability
Data interoperability
New native support for SolidWorks and Autodesk
Inventor
Industry leading support for non-geometric data
Kernel support for ACIS,™ Parasolid,™ and
Granite®
Direct translators for CADDS and AutoCAD®
DWG and DXF with CoCreate Drafting
Industry-standard translators: Autodesk® DXF,
IGES, STEP, SET, VDA, ECAD, CGM,
COSMOS/M, PATRAN®, and SUPERTAB™
geometry files, SLA, JPEG, TIFF, RENDER,
VRML
Integrations to a comprehensive product
development system
Seamless interoperability with Windchill for
content and process management
Direct integrations to Mathcad, ProductView, and
Arbortext increase process productivity
Forward looking information subject to change without notice.
© 2009 PTC