Acid Base Titration Purpose To calculate the molarity of an acid by titrating it with a base Procedure 1. Fill buret A with acid and buret B with base. 2. Run 10.0 mL of acid into the erlenmeyer flask. 3. Add 2 drops of phenolphthalein to the erlenmeyer flask 4. Swirl and add base to the flask until it turns pink. Procedure 5. Add acid until the flask turns clear. 6. Add base SLOWLY until the flask turns the lightest pink 7. Record the volume of acid and base used. 8. Refill burets and complete lab again from step 1, but this time run 15 mL into flask Data Trial 1 Molarity of Base = .500 M Volume of Base = Volume of Acid = Trial 2 Molarity of Base = .500 M Volume of Base = Volume of Acid = Calculations MAVA = MBVB Conclusion Titration involves the reaction between an acid and a base to form water and salt. We found the molarity of the acid to be ___________ and _______________ . Two sources of error include: