Unit 2 Review Name:__________________________ Period: ________ 1. The purpose of traffic signs are to __________________, warn, and to guide drivers. 2. When you come to a stop sign, you must stop your vehicle at the _____________ stop line, before entering the crosswalk, or before entering the intersection if there is no crosswalk. 3. At a 4-way stop you must stop and _______________ for your turn t move. 4. The basic speed law requires you to drive no faster than is safe for ____________________ conditions 5. A red circle and diagonal slash on a sign means that the ___________________ is not allowed. 6. A diamond-shaped sign is a ____________________ sign. 7. When passing another vehicle, you should not cut back into the right lane until you can see the vehicle that you just passed in your _______________________ mirror. 8. When two-lane pavement is marked with a single, solid yellow line on your side of the center line you must not _________________ the yellow line to pass another vehicle. 9. Some common examples of signs with orange backgrounds include a “detour 1000 feet”, “road __________________ ahead”, and “road closed 500 feet”. 10. A sign with an orange background in a _________________ or rectangular shape indicates a construction zone. 11. Your traffic light changes to yellow as you approach an intersection. In most cases, you should make every ______________________ effort to stop. 12. When a right turn against a red signal light is allowed, the proper way to make the turn is to stop, give the right-of-way to any ____________________ or vehicles within the intersection, and then cautiously make your turn. 13. All states allow drivers to make a right turn on red, unless _______________________ posted. 14. A flashing red traffic signal light at an intersection means ______________ the same thing as a stop sign. 15. A flashing red signal means you must make a ___________________ stop. 16. A broken yellow line divides a two-lane highway, when a solid yellow line also appears on your side it means it is ________________________ for you to pass. 17. Broken white lines _________________________ lanes of traffic moving in the same direction. 18. Raised roadway markers on the roadway and shoulder are used to define safe ______________________ of travel. 19. Red roadway markers mean that you are driving the ______________________ way!!!! 20. Curbs painted red, yellow, or white are generally designated as __________________ zones. 21. You are approaching an intersection you intend to make a left turn after stopping for a stop sign, but bushes block your view to the right so you will need to _________________ forward to see better and stop again if necessary. 22. A triangular-shaped sign requires you to __________ the right of way to other roadway users. 23. You pass a school zone sign indicating that you are one _________________ from a school. 24. You are required by law to yield the right-of-way to any ___________________ vehicle engaged in highway construction or maintenance that is displaying amber (yellow) oscillating, rotating, or flashing lights. 25. Yielding to traffic means you are ___________________ others to go before you. 26. The purpose of a rumple strip is to _________________ you through the noise your tires make when driving over them and to warn you that you are driving too close to the roadway edge. WORD BANK No-parking separate alert regulate Wait allowing existing cross Construction unsafe diamond block Reasonable paths wrong marked Yield action rearview authorized Persons full warning creep exactly otherwise