Ch. 7 & 8: Appraisal value
Real Estate Principles: A Value Approach
Ling and Archer
The appraisal process
Sales comparison approach
Cost approach
Income approach
Chapters 7 & 8 focus on estimating the market value of RE, i.e., the most probable selling price, assuming normal sale conditions.
In contrast to market (appraisal) value, investment value is the value a particular investor places on a property
(Chapter 19).
Chapters 7 & 8 try to arrive at an appraisal that is an unbiased written estimate of the fair market value of a property, usually referred to as the subject property, at a particular time.
This process leads to an appraisal report that is the document the appraiser submits to the client and contains (1) the appraiser’s final estimate of value, (2) the data upon which the estimate is based, and (3) the calculations used to arrive at the estimate.
Applying for a mortgage.
Establishing a benchmark for setting the ask price and the bid price.
The Uniform Standard of Professional
Appraisal Practice (USPAP), established in
1987 and maintained by the Appraisal
Foundation, are currently required and followed by all states and federal regulatory agencies.
USPAP imposes both ethical obligations and minimum appraisal standards that must be followed by all professional appraisers.
To comply with USPAP, appraisers follow a general appraisal framework.
1. Identify the appraisal problem.
The appraiser identifies (1) the property to be valued, (2) the property rights to be valued; e.g., fee simple absolute or leasehold, (3) the type of value to be estimated; value estimates for insurance, taxation, or other purposes, (4) the date of the estimate, and (5) limitations of the analysis.
2. Determine the required scope of work.
The worked performed should be consistent with the expectations of typical uses of similar appraisals.
3. Collect data and describe property.
Data are collected concerning the market and property-specific context of the subject property.
The information often includes such items as recent transaction information, rental rates, vacancy rates, physical characteristics of the subject property and comparable properties, flood zone data, population and employment trends, and land use data.
4. Perform data analysis.
This include market analysis: supply, demand, marketability.
The highest and best use of a property is defined as the use found to be (1) legally permissible, (2) physically possible, (3) financial feasible, and (4) maximally productive, i.e., yielding the greatest net benefit to an owner.
In most appraisal assignments, property is valued at its highest and best use.
The appraiser usually visualizes highest and best use in two separate circumstances: (1) highest and best use of the land as though vacant, and (2) highest and best use of the property as improved.
5. Determine value of land.
6. Apply 3 conventional approaches to valuation.
There are 3 conventional approaches: (1) the sales comparison approach, (2) the income approach, and (3) the cost approach.
Generally, all three approaches should be used in a formal appraisal.
The sales comparison approach is usually the preferred approach. It is applicable to almost all one- to four-family residential properties and even to some types of incomeproducing properties where enough comparable sales are available.
The income approach is the dominant approach for incomeproducing properties, e.g., offices.
The cost approach is usually the last resort when there are no comparable sales and there is no income to measure, e.g., public auditoriums.
7. Reconciliation and a final estimate of market value.
Each of the 3 approaches is applied to establish alternative indicators of market value.
Reconciliation: the process in which the appraiser weighs the relative reliability of value indicators for the property being valued.
Usually, more weight is given to the most applicable method and most reliable data.
8. The appraisal report.
Report final value estimate.
The content of appraisal reports must meet the requirements of one of the reporting options defined in USPAP.
Basic Idea:
Value of RE can be determined by analyzing the sale prices of similar properties .
Why?
Because in a competitive market close substitutes will sell for similar prices.
Exhibit 7-3
Identify
Elements of
Comparison &
Value
Adjustment
Select
Comparable
Sales
Adjust
Comparable
Sale Prices w.r.t. Subject
Reconcile
Adjusted Sale
Prices; Obtain
Indicated Value
1. Identify elements of comparison and value adjustment.
These elements are the relevant characteristics used to compare and adjust the property prices.
Examples include location, site size, sale date, construction quality, building age, number of bath, etc.
That is, those elements that have implications on the value of the property.
2. Select comparable sales.
Identify recent sales that are similar to the subject property and located in immediate neighborhood.
Select commercial comparables that compete with the subject property for buyers and/or tenants.
Arm’s-length transactions. Comparable sales are fairly negotiated transactions; no foreclosures.
Usually need at least 3 comparable sales.
The sources of market data on comparable sales include: (1) public records, e.g., the local (county) property tax assessor’s office, (2) multiple listing service (MLS) that is usually maintained by the local board of realtors, and (3) private data services.
3. Adjust comparable sale prices to approximate subject.
2 categories: (1) transactional adjustments, such as condition of sale, financing terms, and market conditions, (2) property adjustments, such as location, physical characteristics, legal characteristics, use, and non-realty items (personal property).
Condition of sale: arm’s-length transactions are preferable.
Financing terms: a favorable financing term (e.g., low-income homebuyer programs) is often associated with a higher purchase price. Try not to use sales with special financing terms because their adjustments are difficult.
Market conditions: historical sale prices need to be adjusted to reflect current market conditions.
Location: real estate value is about location; this adjustment is difficult.
Physical characteristics: differences in lot size, quality of structure, floor plan have implications on
RE value.
Legal characteristics: select sales with the same bundle of rights; the adjustments are difficult.
Use: if you are asked to appraise a single-family residence and a similar house next door is currently used as a law office. Its current sale is not a comparable sale.
4. Reconcile adjusted sale prices; obtain indicated value.
The final adjusted sale prices of comparables are reconciled to the indicated value.
Appraisers usually give more weights to the final adjusted sale prices of comparables that have more complete data, fewer and smaller adjustments (more similar), and more recent transactions.
Transaction price of comparable
+/- Property rights conveyed (most tricky adjustment)
+/- Financing terms (low-income loan?)
+/- Conditions of sale ( a forced sale?)
+/- Expenditures immediately after purchase
+/- Market conditions
= Market-adjusted normal sale price
+/- Location
+/- Physical characteristics (lot size, structure size, etc.)
+/- Economics characteristics (tenant mix, lease terms, etc.)
+/- Use (most tricky adjustment)
+/- Non-realty items
= Indication of subject value
A comparable property sold six months ago for $150,000. The adjustments for the various elements of comparison have been calculated as follows:
Location: -5 percent
Market conditions: +8 percent
Physical characteristics: +$12,500
Financing terms: -$2,600
Conditions of sale: 0
Legal characteristics: 0
Use: 0
Nonrealty items: -$3,000
Transaction price $150,000
Adjustment for financing terms Minus $2,600
Adjusted price = $147,400
Adjustment for market conditions Plus 8% $11,792
Adjusted price = $159,192
Adjustment for location Minus 5% $7,959.60
Adjusted price = $151,232.40
Adjustment for physical characteristics Plus $12,500
Adjusted price = $163,732.40
Adjustment for nonrealty items minus $3,000
Indication of subject value = $160,732
Estimated reproduction cost of improvements
− Estimated depreciation
= Depreciated cost of building improvements
+ Estimated value of site
= Indicated value by the cost approach
The reproduction cost is the cost to construct the building today, replicating it in exact detail. This includes any outdated functional aspects of the building.
Accrued depreciation is the actual reduction in market value of the building. It is the difference between the market value of a building and the total cost to reproduce it new. It can be attributed to (1) physical deterioration, (2) functional obsolescence, e.g., poor room arrangement, and (3) external obsolescence, e.g., a deterioration in the neighborhood.
The use of the income approach is popular for evaluating incomegenerating properties.
Commercial property owners usually expect that they will receive cash flows from their properties.
That is, the perceived value is derived from incomes.
1. First, estimate a property’s expected periodic incomes.
The measure of income is the annual net operating income (NOI).
NOI is equal to expected annual rental income, net of vacancies, minus operating and capital expenses.
Financing costs and income taxes are not considered in the calculation of NOI because these parameters are individual-specific.
Recall that appraisal is about estimating market value, not investment value.
2. Second, convert the income estimates into a market value estimate.
This converting process is called income capitalization.
Two categories of income capitalization methods: (1) direct capitalization, and (2) discounted cash flow method.
Evaluate all income and expense items in terms of current market conditions.
Take the experience of similar properties in the market into consideration.
Take the historical experience of the subject property into consideration.
Appraisers’ income and expense estimates need to be in line with current market rents, average vacancy and collection losses, and normal operating and capital expenses for this type of property in this location and market.
Centre Point office building has 9 office suites.
The contract rents for 6 suites are at
$1,800 per month and for the other 3 suites are at $1,400 per month.
We want to estimate the NOI for the next year.
PGI Potential gross income
– VC Vacancy & collection loss
+ MI Miscellaneous income
= EGI Effective gross income
– OE Operating expenses
– CAPX Capital expenditures
= NOI Net operating income
Potential gross income (PGI) = 6 × $1,800 ×
12 months + 3 × $1,400 × 12 months =
$180,000.
This estimate of PGI is based on contract rents.
Contract rents may be different from market rents. Appraisers may want to make an adjustment to modify the PGI estimate based on market rents.
Suppose that there is no need for the adjustment for Centre Point .
Suppose that vacancy and collection losses are 10% of potential gross income. The property has no miscellaneous income, e.g., garage rentals, parking fees, vending machines, etc.
Effective gross income (EGI) = PGI – vacancy and collection losses + miscellaneous income = $180,000 –
($180,000 × 10%) + 0 = $162,000.
Operating expenses: the ordinary and necessary expenditures incurred during the year (including incidental repairs) that do not materially add value, but keep the property operating and competitive in its market.
Capital expenditures: replacements and alterations to a building or improvement that materially prolong its life and increase its value.
Suppose that operating expense, e.g., property taxes, insurance, utilities, garbage removal, maintenance, repairs, supplies, and property management, is 40% of EGI each year.
Suppose that capital expenditure, e.g., roof replacements, additions, floor coverings, kitchen equipments, air-conditioning, electrical fixtures, and parking surfaces, is 5% of EGI each year.
NOI
1
= EGI – operating expenses – capital expenditures = $162,000 – ($162,000 × 40%) –
($162,000 × 5%) = $89,100.
1
NOI
1
= $89,100.
Direct capitalization is the process of estimating a property’s market value by dividing the next calendar year’s NOI by a current capitalization (cap) rate, R
0
.
V
0
= NOI
1
/ R
0
.
(Current) cap rate R
0 is also called the overall cap rate or the going-in cap rate.
Cap rate is not an overall measure of return because its use ignores the most of future (t
= 2, 3, 4, ….) cash flows from operations.
(Current) cap rate is analogous to the dividend yield on a common stock.
Not a discount rate.
All else being the same, investors prefer properties (stocks) with the highest cap rate
(dividend yield).
2 methods.
(1) Abstracting cap rates from comparables’ cap rates, i.e., using the average cap rate of comparables.
(2) Required going-in cap rate survey numbers. The Real Estate Research
Corporation (RERC) regularly surveys the cap rate expectations of institutional investors. The results are can be found (for a fee) at www.rerc.com
.
Suppose that the appraiser chooses a cap rate of 9.9% for Centre Point.
V
0
= NOI
1
$900,000.
/ R
0
= $89,100 / 0.099 =
That is, the appraisal value of this income-property is estimated to be
$900,000.
Suppose that the Centre Point is bought at
$900,000, NOI
1
(you can think of this as dividends)
= $89,100, and the property is expected to increase in value to $916,650 by the end of year 1.
The expected return, y
0 in IRR is:
, or, equivalently, the goingy
0
V
0
= [dividends + (V
1
) / V
0
≡ R
0
+ g.
– V
0
)] / V
0
= NOI
1
/ V
0
+ (V
1
–
0.1175 = [$89,100 + ($916,650 - $900,000)] /
$900,000 = 0.099 + 0.0185.
y
0
= R
0
+ g.
Property return has two components:
(1) dividends, i.e., cash generating power, and (2) appreciation
(depreciation).
Implication: with required return (yield) constant, more appreciation implies lower cap rate.
According to IPG/CRENews, Taconic and NY
Common's sale of 450 Park should fetch $1,500 per square foot ($510 million), which would set a new
Gotham record…. The office is located at the northern tip of "Wall Street North", at 57th and Park, where rents continue to rise above the $100 psf mark.
2006 NOI totaled $13.7 million, yielding a 2.7% cap rate (!!!) at $510 million, excluding closing costs.
Source: http://threecap.blogspot.com
Why is the cap rate so low? (4.68% for T-bills)
Note that risk drives return in equilibrium, regardless of whether the asset is a property or a stock.
That is, y
0 is determined in the capital market. The causality goes from y
0
R
0
, not the other way around. to
We have studied the 1 st method of income capitalization: direct capitalization on NOI
1
.
We now would like to look at the 2 nd method: DCF.
For this method, we need NOI estimates for a longer period of time.
Suppose that the holding period is 5 years.
A pro forma analysis gives us the NOI estimates for the next 6 years: $89,100 ,
$91,773, $94,526, $97,362, $100,283, and
$103,291.
The going-out cap rate, R
5
, is 10.00%.
V
5
= NOI
6
/ R
$1,033,000.
5
= $103,291 / 0.10000 =
The expected selling expenses are $58,300.
The discount rate for NOI’s is 11.75%.
CF
5
= $1,033,000 + $100,283 - $58,300 =
$1,074,983.
V
0
= $89,100 / (1+ 0.1175) + $91,773 / (1+
0.1175) 2 + $94,526 / (1+ 0.1175) 3 + $97,362
/ (1+ 0.1175) 4 + $1,074,983 / (1+ 0.1175) 5 =
$900,181.
A final reconciliation between
$910,000 (direct capitalization) and
$900,181 (DCF) is then reached.
Suppose that the appraiser has more confidence on the DCF estimate, and decides the indicated value to be
$900,200.
“The General Motors Building (in
Manhattan) will likely be sold for more than $3 billion... with at least three offers topping $3 billion…. work out to about $1,500 per square foot.”
Source: WSJ, Feb. 20, 2008
Please obtain information on the following property: Unit #1207, Trump
Tower Waikiki.
Please compute its appraisal value based on the sales comparison approach.