Johnson and Wales University 317 Legacy Network Documentation By Ethan Arberman and Andrew Becklo Special thanks to Dr. Tom Calabrese, Jim Sheusi, Mike Gendron, 2 Contents Introduction .................................................................................................................................................. 3 Cisco 2500 Router ......................................................................................................................................... 4 System Specifications................................................................................................................................ 4 3Com Super Stack II Hub 10 24-Port ............................................................................................................. 6 Management:............................................................................................................................................. 6 Network Connections: .............................................................................................................................. 6 Hayes Smart Modem 2400 ........................................................................................................................... 8 Overview ................................................................................................................................................... 8 Product Features ....................................................................................................................................... 8 Technical Details ....................................................................................................................................... 8 APC AP9225 Master Switch Plus ................................................................................................................... 9 Overview ................................................................................................................................................... 9 Features of Master Switch Plus................................................................................................................. 9 3Com Super Ethernet Power Source .......................................................................................................... 10 Specifications .................................................................................................................................... 10 HP Rack mount flat panel Monitor/Keyboard ............................................................................................ 11 Specifications .................................................................................................................................... 11 Environmental temperature requirements (independent of altitude) ........................................ 11 Power consumption <30 Watts .......................................................................................................... 11 Tektronix TAS 475 Oscilloscope .................................................................................................................. 12 Features & Benefits................................................................................................................................. 12 Applications............................................................................................................................................. 12 HP NetServer LH 4 ....................................................................................................................................... 13 Manufacturer description ................................................................................................................... 13 Specifications ...................................................................................................................................... 13 Works Cited ................................................................................................................................................. 16 3 Introduction Dr. Calabrese came to us with a vision a legacy network that would be available to all technology students to go and look and get an idea of what a rack would like with things in it as well as looking at old technology that is not used anymore but without it we would not be where we are today. We set up the racks as thought they would be being used by a company with all of the lighter things on the top and the heaver things on the bottom. This documents perpus is twofold one is to tell you what this is but the other is to be a guide line for how to do documentation for a network in this case the network is not operational but we are still able to make documentation that makes sense for this kind of network using different tools such as Microsoft Visio as well as Microsoft word. 4 Cisco 2500 Router System Specifications The system specifications of the routers are listed in Table 1-2. Table 1-2 System Specifications Description Specification Dimensions (H x W x 1.75 x 17.5 x 10.56 in. (4.44 x 44.45 x 26.82 cm), D) one rack unit Weight 10 lb (4.5 kg) Input voltage, AC power supply Current Frequency Power dissipation 100 to 240 VAC 1.2 to 0.6A 50/60 Hz 40W (maximum), 135.5 Btus1 /hr Input voltage, DC power supply Current Power dissipation 40W, 40 to 72 VDC 1.5 to 1.0A 40W (maximum), 135.5 Btus/hr Processor 20-MHz Motorola 68EC030 Interfaces See for a list of interfaces supported on each router model. • Ethernet AUI (IEEE2 802.3) (DB-15) • Token Ring (IEEE 802.5) (DB-9) • Synchronous serial3 (DB-60) • ISDN BRI (RJ-45)4 5 • Console (RJ-45) • Auxiliary (RJ-45) Operating environment 32 to 104F (0 to 40C) Nonoperating temperature -40 to 185F (-40 to 85C) Operating humidity 5 to 95%, noncondensing Noise level 34 dBa @ 3 ft (0.914 m) Regulatory compliance FCC Class A and Canadian DOC Class A For more regulatory information, refer to the document that accompanied your router. 6 3Com Super Stack II Hub 10 24-Port The SuperStack II Hub 10 24 Port TP (3C16671A) has 24 dedicated twisted pair ports on the front panel and an AUI port on the rear panel. The rear panel also has a slot for a 3Com Transceiver Module or Bridge MicroModule; if fitted the Module will operate in addition to the AUI port. A range of different media Transceiver Modules is available from 3Com (see"Products and Bulletin Boards"). The Hub 10 24 Port TP can be stand-alone or linked with other Hub 10, LinkBuilder FMS II, FMS, 10BT or 10BTi units to form a stack of units of different media. Each stack is the equivalent to a single IEEE 802.3 repeater, so stacking units gives you the benefit of a higher port count. The Hub 10 24 Port TP is suited for office use where it can be wall-mounted, rackmounted, or free standing. Alternatively, the unit can be rack-mounted in a wiring closet or equipment room. A mounting kit is supplied. The Hub 10 24 Port TP can be powered either from the AC mains supply, or through an optional 3Com Redundant Power System (3C565047) to provide a more reliable supply. Contact your supplier for details. Management: A SuperStack II Hub 10 Management Module (3C16630A) or Advanced RMON Module (3C16632) can be fitted to the Hub 10 24 Port TP to provide full SNMP management, including statistics, resilient links and security features. Only one Management Module or Advanced RMON Module is required for each stack. Refer to the guides accompanying the module for details on how to manage a Hub 10 unit or stack. Resilience and Security Hub 10 Management Module (3C16630A) and Hub 10 Advanced RMON Module (3C16632) offer resilience and security features. Up to 16 resilient link pairs can be configured via management software. Network Connections: You can connect the Hub 10 24 Port TP to any Data Terminal Equipment (DTE) fitted with a 10Base-T network adapter or a 10Base-T transceiver. Connect one end of the twisted pair cable to the RJ45 port on the unit and the other end to the RJ45 port on your network adapter or transceiver. You can attach up to 24 twisted pair segments to the front of the unit. The Hub 10 24 Port TP can use both shielded 150ohm, and unshielded or shielded 100ohm twisted pair cables. To remain within 802.3 10Base-T rules the maximum length of cable between the unit and any DTE should not be greater than 100m (110 yards). Consult your supplier's technical support department if you need to use twisted pair cables over greater distances. You can connect any 802.3 transceiver to the unit using an AUI cable connected to the AUI port on the rear panel. Also, you can fit one of the 3Com Transceiver Modules or a Bridge MicroModule into the slot on the rear panel (see"Products and Bulletin Boards"). 7 You can connect the Hub 10 24 Port TP to any other 10Base-T repeater using port 24, to form an inter-repeater link. You must switch port 24 to MDI to bypass the internal cross-over normally implemented by 10Base-T unit ports: see "MDI Switch". SuperStack II Hub 10 24-Port TP 24 RJ-45, one AUI) Product Specifications -four 10 Mbps Ethernet; one AUI -four 10BASE-T, RJ-45 connectors ional transceiver interfaces: AUI coaxial, BNC coaxial, twisted-pair, ST fiber module tion, Unit ID Network Control Services Version 1.2 for Windows NT, 3Com Transcend Enterprise Manager Version 6.3 for Windows NT -1 (IEC 801 2-5) -264 VAC, Frequency: 50/60 Hz, Consumption: 36 W tional backup power: SuperStack® 3 Advanced Redundant Power System with 60 W Type 1 power module 8 Hayes Smart Modem 2400 Overview Hayes Microcomputer Products was a U.S.-based manufacturer of modems. They are particularly well known for their Smart modem, which is introduced the ability to control the modem through commands sent in the data stream itself. The "smart modem" approach dramatically simplified operation, making modems a practical device for a much wider audience. Today almost all modems still use a variant of the Hayes command set introduced in the Smart modem. Product Features Error-Control and Data Compression 9600 bps throughput with V.42 data compression Hayes Standard AT Command Set Asynchronous and Synchronous Hayes AutoSync Technical Details Brand Name: Hayes Model: 4007AM 9 APC AP9225 Master Switch Plus Overview To detect internal problems and recover from unanticipated inputs, the unit uses internal, system-wide watchdog mechanisms. When it reboots itself to recover from an internal problem, a System: Warmstart event is recorded in the event log. Features of Master Switch Plus MasterSwitch Plus allows you to individually control power to connected equipment and to gracefully shut down or restart up to eight connected servers running different operating systems. In order to manage your system effectively and efficiently, MasterSwitch Plus has these additional features: • Four password-protected accounts that ensure restricted access to system-, device-, read-only- and outlet-level services. • Automatic shut-down of connected servers attached to an APC UPS when the UPS enters an on-battery state and removes power from connected equipment after the server confirms shutdown. • Shuts down servers before cycling power to the connected equipment (Graceful Reboot). • Control of eight power outlets (per unit) for complete and flexible management of connected equipment. • Web, control console, or SNMP management interfaces. • Configure the sequence in which outlets receive power upon start-up. • Connects serially to up to three expansion units (AP9225EXP), providing control of 32 connected devices with one IP address. • Provides a selection of security protocols for authentication and encryption. • Event log accessible by FTP, SCP, Telnet, serial connect 10 3Com Super Ethernet Power Source The 3Com® Ethernet power sources (EPS) let companies with NBX® telephones or 3Com wireless access points connect and power these devices from a single location using their LAN cabling. With the EPS located in a secure wiring closet or other central location, you can easily access and manage the distribution of power to devices throughout your organization. EPS eliminates the need for a local power outlet and power cable for each device. One wire provides both 10/100BASE-T connectivity and power, freeing power outlets for other electronic equipment. Specifications EPS supports 3Com NBX business telephones and 3Com AirConnect® wireless access points Supplies centralized power directly to 3Com Ethernet devices over LAN cabling Simple plug-and-use installation Eliminates the need for a local power outlet and an extra power cable for each device Can be installed with an uninterruptible power source or DC battery backup system Includes intelligent device detection features (detect 3Com powered devices only) No special network configuration is required—just plug it in Helps eliminate risk of damage to non-powered devices on the network Ethernet power sourcing extends the simplicity and economy of convergence to small businesses 3Com NBX Ethernet power sources come in 12-port (3C10220) and 24-port (3C10222) versions to accommodate various network types and sizes Single-port products also available for 3Com wireless access points and NBX telephones 3Com NBX Telephone power splitter 12-pack (3C10223) available for NBX telephones attached to an Ethernet power source 11 HP Rack mount flat panel Monitor/Keyboard Specifications Display size 43.18 cm (17 in) Display type Flat panel, active matrix-TFT LCD Viewable image size 43.18 cm (17 in) diagonal Maximum weight (unpacked) 4.54 kg (10 lb) Maximum height 4.23 cm (1.68 in) Maximum depth 42.31 cm (16.66 in) Maximum width 43.2 cm (16.97 in) Resolution 1440 x 900 (WXGA+) (recommended for maximum performance) 640 x 480 (VGA) through 1280 x 1024 (SXGA) Response time <25 ms Brightness >190 (cd/m^2) Contrast ratio >350:1 Environmental temperature requirements (independent of altitude) Item Specifications Operating temperature 0º to 40º C (32º to 104º F) Storage temperature -20º to 60º C (68º to 140º F) Humidity (NonCondensing) Operating 20% to 90% Non-operating 5% to 95% Power source Input rating 90 to 264 VAC, 47 to 63 Hz Power consumption <30 Watts 12 Tektronix TAS 475 Oscilloscope Features & Benefits 100 MHz at Two Channels TAS465 100 MHz at Four Channels TAS475 200 MHz at Four Channels TAS485 Dual (Delayed) Time Base Measurement Cursors CRT Readout Auto Setup Store/Recall of Setups Video Trigger Trigger/Ground Reference Indicator Combination Menu/Direct Access Controls Applications Training Manufacturing Production Test Field Repair Bench Calibration and Repair Product Design 13 HP NetServer LH 4 Manufacturer description The HP NetServer LH4r has the power, reliability, and expansion room to handle everything from Web hosting to ERP applications, for fast-growing workgroups all the way up to corporate data centers. Your business depends upon your network. Your network depends on the server - shouldn't that server be the fastest and most dependable you can get? The HP NetServer LH4r is a high-availability server that offers the highest speed and dependability for your department or business. With the extensive expansion options for this model, it is perfect for rapidly growing companies. The NetServer offers more than speed and drive bays - it offers superior fault tolerance to keep your network running. With advanced system monitoring, technicians can quickly check the server status, ensuring that a problem is detected before it becomes a crisis. Specifications General Type Server Recommended Use Corporate business , Small business Product Form Factor Rack-mountable Built-in Devices None Server Scalability 4-way Front Accessible Bays Qty 4 Hot-Swap Bays Qty 6 Width 19.0 in Depth 29.5 in Height 14.0 in Weight 79.4 lbs Color White Processor Type Intel Pentium III Xeon 500.0 MHz Installed Qty 1.0 Max Supported Qty 4.0 Upgradability Upgradable Mainboard Data bus speed 100.0 MHz Cache Memory Type L2 cache - Write-Back Installed Size 1.0 MB (installed) / 8.0 MB (max) Storage Controller Type 1.0 x RAID - Integrated - PCI Controller Interface Type Ultra2 Wide SCSI 14 Channel Qty 2.0 RAID Level RAID 3 , RAID 50 , RAID 0 , RAID 30 , RAID 1 , RAID 10 , RAID 5 Storage Controller (2nd) Type 1 x SCSI - Integrated - PCI Controller Interface Type Ultra2 Wide SCSI Channel Qty 2 RAID Level None Storage Floppy Drive 3.5" 1.44 MB floppy Hard Drive none. Optical Storage Type CD-ROM - IDE Read Speed 32x Write Speed N/A Rewrite Speed N/A Media Load Type Tray Storage Removable Type None Monitor Monitor Type none. Graphics Controller Type Integrated Video Memory 1.0 MB / 2.0 MB (max) Supported Display Graphics SVGA (800x600) , XGA (1024x768) , VGA (640x480) Video Output Supported None Digital Video Standard None Audio Output Type None Speaker(s) None Input Device Type None Audio Input Type None Telecom Modem None Networking Networking None Printer Type None Expansion / Connectivity Expansion Bays 6.0 (total) / 6.0 (free) x Front accessible - 3.5" x 1/3H , 3.0 (total) / 2.0 (free) x Hot-swap - 3.5" x 1/3H , 1.0 (total) / 0.0 (free) x Front accessible Expansion Slot(s) 2.0 (total) / 5.0 (free) x Memory - Full-length , 5.0 (total) / 0.0 (free) x PCI 64 - Slot 2 , 16.0 (total) / 3.0 (free) x Processor - DIMM 168-pin , 2.0 (total) / 16.0 (free) x Shared PCI / ISA - Full-length , 1.0 (total) / 1.0 (free) x PCI - Full-length , 4.0 (total) / 2.0 (free) x Memory board 15 Interfaces 1.0 x Storage - Ultra2 SCSI - 6 pin mini-DIN (PS/2 style) , 2.0 x Serial Generic - 25 pin D-Sub (DB-25) , 1.0 x Display / video - IEEE 1284 (EPP/ECP) - 9 pin D-Sub (DB-9) , 1.0 x Parallel - Generic - 6 pin mini-DIN (PS/2 style) , 1.0 x Management - VGA - 9 pin D-Sub (DB-9) , 2.0 x Mouse - RS-232C - 15 pin HD D-Sub (HD-15) , 1.0 x Keyboard - RS-232C Miscellaneous Included Accessories Rack mounting kit Features Serial port I/O control , Cover key lock , Diskette I/O control , Power-on password Pricing Type HP Select Express Program Power Device Type Power supply - hot-plug / redundant Installed Qty 3.0 Max Supported Qty 4.0 Power AC 120/230 V ( 47/63 Hz ) Power Consumption Operational 1100.0 Watt Manufacturer Warranty Service & Support 3 years warranty Service & Support Details Limited warranty - Parts and labor - 3 years - On-site , Technical support - Phone consulting - 3 years 16 Works Cited (n.d.). Retrieved from Amazon: amazon.com/APC-AP9225-Mountpdu-Rs232Masterswitch/dp/B00006BBHZ (n.d.). Retrieved from wikipedia: http://en.wikipedia.org/wiki/Hayes_Microcomputer_Products (n.d.). Retrieved from CNET: http://reviews.cnet.com/networking-and-wi-fi/3com-superstack-iihub/4505-3335_7-30102317.html 2.hp. (n.d.). Retrieved from http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00624810/c00624810.pdf HP Netserver. (n.d.). Retrieved from http://reviews.cnet.com/soho-servers/hp-netserver-lh-4/17073125_7-6144897.html http://mtmnet.com/3C16980Refurb.htm. (n.d.). Retrieved from http://mtmnet.com/3C16980Refurb.htm kvms. (n.d.). Retrieved from kvms.com/ID/2974.aspx mtmnet. (n.d.). Retrieved from http://mtmnet.com/PDF_FILES/3C16950_SSII1100SalesBro.pdf wikipedia. (n.d.). Retrieved from http://en.wikipedia.org/wiki/Rack_unit. http://www2.tek.com/cmswpt/psdetails.lotr?ct=PS&cs=psu&ci=14426&lc=EN http://www.3comphones.com/nbx_ethernetpower.htm http://www.cisco.com/en/US/docs/routers/access/2500/2501/software/user/guide/ovr.html