Presentation_1

advertisement
www.asonika.com
The automated system of
maintenance of reliability and
quality of equipment
ASONIKA
www.asonika.com
The developer:
Company "CALS-technology".
Russia.
The head of working out:
General director,
professor, Dr.Sci.Tech.
Alexander Shalumov
www.asonika.com
My coordinates:
E-mail:
ALS140965@mail.ru
Mobile phone:
8-916-581-25-77
Site:
www.asonika.com
www.asonika.com
Lecture number 1
Designing Electronic Equipment
& Managing Electronic Models:
Design of Automation
Systems in Russia
www.asonika.com
CALSСontinuous Acquisition
and Life Cycle Support
www.asonika.com
System ASONIKA structure
www.asonika.com
Reference directions of scientific innovation
activity:
1. Complex mathematical modelling of electronic during
a life cycle «designing - effecting - exploitation».
2. Integration of automated design engineering
systems, complex computer simulation and technological
opening-up of effecting of electronic on the basis of
CALS-technologies.
3. Mining techniques of training and conversion
training, opening-up and retraining of the workers to
design augmented by computer and complex computer
simulation of electronic.
www.asonika.com
Work urgency. Problems.
Operation of electronic is characterised by
influence on it sets of rigid external factors which
operate simultaneously that leads to refusals of
system character.
Such refusals are difficult for revealing at tests as
there are no stands which would allow to reproduce
in a complex simultaneously electric processes,
thermal, mechanical, aerodynamic, radiating and
other external influences, the technological
phenomena of casual disorders of parametres,
ageing, corrosion and others factors.
www.asonika.com
System ASONIKA is intended for the decision of 4 basic
problems existing by working out modern electronic:
1) problems of prevention of possible refusals at operation at early
design stages at the expense of complex modelling of diverse
physical processes;
2) problems of safety of the person at flights by planes (prevention
of air crashes) at the expense of the complex automated analysis of
management system by plane on the basis of the created electronic
model at all kinds external destabilising factors, including in critical
modes;
3) problems of reduction of terms and expenses for designing at
the expense of availability to the developer of equipment of offered
software and adequacy of results of modelling;
4) problems of automation of document circulation and creation of
electronic model of a product at the expense of integration of offered
software within the limits of storage and management PDM-system
the engineering data and life cycle of a product (equipment).
www.asonika.com
PDMProduct Data Management
Let's look at some fragments
of system ASONIKA.
Further we will consider all it
in more details and with examples.
www.asonika.com
ASONIKA-M
Subsystem of the analysis of volumetric constructions of electronic equipment on mechanical influences
ASONIKA-V -
www.asonika.com
Subsystem of the analysis
and maintenance of stability to mechanical influences of electronic equipment, established on vibration isolators
www.asonika.com
ASONIKA-ТM
Subsystem of the analysis of constructions of printed board assemblies on thermal and mechanical influences
www.asonika.com
MENTOR GRAPHICS - ASONIKA-ТM
www.asonika.com
ASONIKA-B
Subsystem of the analysis of parameters of reliability taking into account actual operational modes
www.asonika.com
In terrain of Russian Federation system ASONIKA the
clones have no. On foreign clones the information is absent
in the open printing misses.
Today in Russia we are monopolists in the field of
modelling of physical processes in electronic. To create
analogue of system ASONIKA, it is necessary to type a
strong team of experts, to enclose many money and to
spend not less than 10 years. Today in Russia it is
impossible. Therefore we will remain monopolists in Russia
still very long. All foreign companies which introduce the
software for electronic at the Russian enterprises, address
and will address to us for integration of their systems with
our system ASONIKA as they do not have modelling of
physical processes in electronic.
www.asonika.com
System ASONIKA possesses considerable
advantages before universal systems of the
engineering analysis which cannot be used in the
field of electronics without special adaptation at
analytical and methodical levels.
Comparison with some of them is presented
more low.
www.asonika.com
Comparison with universal systems of the engineering analysis
In the field of designing of electronic
www.asonika.com
The system ASONIKA is inserted more than on 60
domestic firms of an industry designing electronic.
Especially actively we work on space subjects with the
Russian
space-rocket
corporation
"Energy".
Our
cooperation already proceeds 6 years. At this enterprise in
2005 system ASONIKA has been introduced. Today any
Russian electronic device does not go on the International
space station, if it was not modelled on thermal and
mechanical influences by means of system ASONIKA.
Today in Russia the state standard is developed.
System ASONIKA according to this standard is unique
system in Russia recommended alternatively to natural
tests of pre-production models of electronic at early design
stages. It allows to create competitive electronic in the
minimum terms and with the minimum expenses.
www.asonika.com
The problem of definition of dynamic
characteristics of the device can be solved,
using workings out firms LMS (Holland). For
the decision the following software of one
workplace is necessary:
www.asonika.com
www.asonika.com
Technical and economic effects.
Technical and economic effects from system
ASONIKA introduction in practice of designing highly reliable EE are
caused:
1)
Increase of indicators of reliability developed EE in view
of reduction of influence of the human factor by adequacy of results
of modelling, owing to use of specialised graphic interfaces of
synthesis EE and visualisation of results of modelling;
2)
Reduction of terms and expenses of designing highly
reliable EE taking into account requirements of the standard
documentation on electric, thermal, mechanical and other
characteristics at the expense of reduction of quantity of intermediate
variants of pre-production models and decrease in labour input of
design works;
3)
Availability of use of software the designer who does
not have specialised knowledge in the field of calculations;
4)
Possibility operatively to carry out the analysis and
synthesis of design decisions EE at complex influences, and also
possibility of maintenance of firmness EE to external destabilising
factors on the basis of program and methodical maintenance.
Download