Gerald M. Pamintuan, RME
Old Airport Road, Doha, Qatar
Cel. No.: +974 66843480
Position Desired
: Any position that suite my qualifications.
Objectives
: To work with commitment in a well-organized company, where my
skills will be useful for the development of company and to boost
my career to the peak.
WORKING EXPERIENCE:

PROJECT ENGINEER
R.G. Simbillo Technologies International Corporation
Lazatin Boulevard, Dolores, CSFP
March 2011 – June 2012
Project Handled:
-
Petron Refinery Corporation, Limay, Bataan :
 Three (3) years Preventive Maintenance of various A/C Units
 Installation of Compressor for 30 TR A/C Units
 Replacement and Rehabilitation of various A/c Units
-
Philippine Polypropylene Inc., Mariveles,Bataan
 Rehabilitation of Cladding/ Supply and Installation of Two Units 15-TR
A/C Compressor
-
Corporate Guarantee Insurance Company, City of Sn. Fdo. Pamp.
 Supply and Installation of 120 TR Chilled Water-Type Ducted FCUs
-
Florida Blanca Memorial Hospital, Florida Pampanga
 Supply and Installation of Split-type and Window-type air-conditioners
-
Dr. Manuel Manalo Jr. Clinic, San Fernando Pampanga
 Supply and Installation of split-type A/C units
-
National Grid Corporation of the Philippines (NGCP) - Mexico
Pampanga
 Supply and Installation of Multi-V and Precision A/C Units
-
Jumbo Jenra Supermarket, Sindalan, San Fernando Pampanga
 Supply and Installation of Chilled Water-Type Ducted FCUs
 Supply and Installation of Fire Protection System
-
UPS INTERNATIONAL INC. (CLARK), Clark Freeport Zone,
Pampanga
 Two (2) years Preventive Maintenance of various A/C Units
 Supply and Installation of 15 TR Packaged type A/C unit
DUTIES AND RESPONSIBILITIES
 Mechanical Estimator
 Make recommendations for modifications to improve units operations
 Perform and/or manage all phases of engineering projects from conceptual
studies, cost estimating
 Perform equipment inspections.
 Monitor and evaluate unit performance
 Developing HVAC designs from proposal through design, fabrication and test
 Design and fabrication oversight of multiple concurrent developmental efforts
 Provide daily oversight of shop personnel for the concurrent design and
fabrication of New HVAC systems
 Maintain productive relationships with clients, both internal and external
 Operate within company project document control requirements
 Provide technical support to Customers, Business Development Managers and
Manufacturing.
SEMINAR ATTENDED:

HEATING VENTILATING AND AIRCONDITIONING
February 12, 2009
DHVTSU
Bacolor, Pampanga

SAFETY ENGINNEERING ANG FIRE PROTECTION SYSTEM
February 12, 2009
DHVTSU
Bacolor, Pampanga

HEATING VENTILATING AND AIRCONDITIONING
o INTRODUCTION TO INVERTER TYRPE AIR-CONDITIONING
o PRESICION AIRCON UNIT
o AIR-CONDITIONING FOR HEALTH CARE FACILITY
December 15, 2009
DHVTSU
Bacolor, Pampanga
EDUCATIONAL BACKGROUND:
Tertiary
:
DON HONORIO VENTURA TECHNOLOGICAL
STATE UNIVERSITY
Bacolor, Pampanga
2005 – 2011
Course : B.S. Mechanical Engineering
*Passed Mechanical Engineering Board Examination
September 28 and 29, 2011
Secondary
:
GUAGUA NATIONAL COLLEGES
Guagua, Pampanga
2001 – 2005
Primary
:
GUAGUA NATIONAL COLLEGES
Guagua, Pampanga
1994 – 2001
HIGHLIGHTS OF QUALIFICATIONS:





Hardworking, flexible, patient, confident and committed in working with other
people. Able to work independently and cooperate with others and able to direct and
make decision. Enthusiastic and committed to professional excellence
Communicate well – oral and written (English, Tagalog, Pampango)
Can work in minimum supervision and under time pressure
Trust worthy
Can be a good team leader
KEY KNOWLEDGE AND SKILLS





Effective listener, good at listening to requirements or problems without bias.
Have strong analytical, problem solving and decision making skills.
The ability to think beyond the boundaries and challenge the status-quot.
Knowledge in Auto-Cad Operation.
Computer Literate.
PERSONAL DATA:
Nickname
Date of Birth
Place of Birth
Civil Status
Gender
Citizenship
Height
Weight
:
:
:
:
:
:
:
:
Yhay
April 24, 1988
Guagua, Pampanga
Married
Male
Filipino
5’10”
165 lbs
I hereby affirm that the foregoing statements made by me are true and correct to the
best of my knowledge.
____________________________
Eng’r. Gerald M. Pamintuan
Registered Mechanical Engineer
P RC– License No. 076518