pH calculations
A guide for A level students
KNOCKHARDY PUBLISHING
pH calculations
INTRODUCTION
This Powerpoint show is one of several produced to help students understand
selected topics at AS and A2 level Chemistry. It is based on the requirements of
the AQA and OCR specifications but is suitable for other examination boards.
Individual students may use the material at home for revision purposes or it
may be used for classroom teaching if an interactive white board is available.
Accompanying notes on this, and the full range of AS and A2 topics, are
available from the KNOCKHARDY SCIENCE WEBSITE at...
www.argonet.co.uk/users/hoptonj/sci.htm
Navigation is achieved by...
either
or
clicking on the grey arrows at the foot of each page
using the left and right arrow keys on the keyboard
pH calculations
CONTENTS
• What is pH? - a reminder
• Calculating the pH of strong acids and bases
• Calculating the pH of weak acids
• Calculating the pH of mixtures - strong acid and strong alkali
• Calculating the pH of mixtures - weak acid and excess strong alkali
• Calculating the pH of mixtures - strong alkali and excess weak acid
• Check list
pH calculations
Before you start it would be helpful to…
• know the differences between strong and weak acid and bases
• be able to calculate pH from hydrogen ion concentration
• be able to calculate hydrogen ion concentration from pH
• know the formula for the ionic product of water and its value at 25°C
What is pH?
pH = - log10 [H+(aq)]
where [H+] is the concentration of hydrogen ions in mol dm-3
to convert pH into
hydrogen ion concentration
IONIC PRODUCT OF WATER
[H+(aq)] = antilog (-pH)
Kw =
[H+(aq)] [OH¯(aq)] mol2 dm-6
=
1 x 10-14 mol2 dm-6 (at 25°C)
Calculating pH - strong acids and alkalis
WORKED
EXAMPLE
Strong acids and alkalis completely dissociate in aqueous solution
It is easy to calculate the pH; you only need to know the concentration.
Calculate the pH of 0.02M HCl
H+ + Cl¯
HCl completely dissociates in aqueous solution
HCl
One H+ is produced for each HCl dissociating so
[H+]
= 0.02M
= 2 x 10-2 mol dm-3
pH
= - log [H+]
= 1.7
Calculating pH - strong acids and alkalis
WORKED
EXAMPLE
Strong acids and alkalis completely dissociate in aqueous solution
It is easy to calculate the pH; you only need to know the concentration.
Calculate the pH of 0.02M HCl
H+ + Cl¯
HCl completely dissociates in aqueous solution
HCl
One H+ is produced for each HCl dissociating so
[H+]
= 0.02M
= 2 x 10-2 mol dm-3
pH
= - log [H+]
= 1.7
Calculate the pH of 0.1M NaOH
Na+ + OH¯
NaOH completely dissociates in aqueous solution
NaOH
One OH¯ is produced for each NaOH dissociating
[OH¯] = 0.1M
The ionic product of water (at 25°C)
therefore
Kw
= [H+][OH¯]
= 1 x 10-1 mol dm-3
= 1 x 10-14 mol2 dm-6
[H+] = Kw / [OH¯] = 1 x 10-13 mol dm-3
pH
= - log [H+] = 13
Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows
HA(aq)
H+(aq) + A¯(aq)
(1)
Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows
HA(aq)
Applying the Equilibrium Law
Ka
=
H+(aq) + A¯(aq)
[H+(aq)] [A¯(aq)]
[HA(aq)]
mol dm-3
(1)
(2)
Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows
HA(aq)
Applying the Equilibrium Law
Ka
H+(aq) + A¯(aq)
=
[H+(aq)] [A¯(aq)]
mol dm-3
(1)
(2)
[HA(aq)]
The ions are formed in equal amounts, so
therefore
[H+(aq)]
=
Ka =
[A¯(aq)]
[H+(aq)]2
[HA(aq)]
(3)
Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows
HA(aq)
Applying the Equilibrium Law
Ka
H+(aq) + A¯(aq)
=
[H+(aq)] [A¯(aq)]
mol dm-3
(1)
(2)
[HA(aq)]
The ions are formed in equal amounts, so
therefore
[H+(aq)]
=
Ka =
[A¯(aq)]
[H+(aq)]2
[HA(aq)]
Rearranging (3) gives
therefore
[H+(aq)]2
=
[H+(aq)]
=
[HA(aq)] Ka
[HA(aq)] Ka
(3)
Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows
HA(aq)
Applying the Equilibrium Law
Ka
H+(aq) + A¯(aq)
=
[H+(aq)] [A¯(aq)]
mol dm-3
(1)
(2)
[HA(aq)]
The ions are formed in equal amounts, so
therefore
[H+(aq)]
=
Ka =
[A¯(aq)]
[H+(aq)]2
[HA(aq)]
Rearranging (3) gives
therefore
[H+(aq)]2
=
[H+(aq)]
=
pH
[HA(aq)] Ka
[HA(aq)] Ka
= [H+(aq)]
(3)
Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows
HA(aq)
Applying the Equilibrium Law
Ka
H+(aq) + A¯(aq)
=
[H+(aq)] [A¯(aq)]
mol dm-3
(1)
(2)
[HA(aq)]
The ions are formed in equal amounts, so
therefore
[H+(aq)]
=
Ka =
[A¯(aq)]
[H+(aq)]2
(3)
[HA(aq)]
Rearranging (3) gives
therefore
[H+(aq)]2
=
[H+(aq)]
=
pH
ASSUMPTION
[HA(aq)] Ka
[HA(aq)] Ka
= [H+(aq)]
HA is a weak acid so it will not have dissociated very much. You can assume that
its equilibrium concentration is approximately that of the original concentration.
WORKED
EXAMPLE
Calculating pH - weak acids
Calculate the pH of a weak acid HX of concentration 0.1M ( Ka = 4x10-5 mol dm-3 )
HX dissociates as follows
HX(aq)
H+(aq)
+
X¯(aq)
WORKED
EXAMPLE
Calculating pH - weak acids
Calculate the pH of a weak acid HX of concentration 0.1M ( Ka = 4x10-5 mol dm-3 )
HX dissociates as follows
Dissociation constant for a weak acid
H+(aq)
HX(aq)
Ka
=
+
X¯(aq)
[H+(aq)] [X¯(aq)] mol dm-3
[HX(aq)]
WORKED
EXAMPLE
Calculating pH - weak acids
Calculate the pH of a weak acid HX of concentration 0.1M ( Ka = 4x10-5 mol dm-3 )
HX dissociates as follows
Dissociation constant for a weak acid
H+(aq)
HX(aq)
Ka
=
+
X¯(aq)
[H+(aq)] [X¯(aq)] mol dm-3
[HX(aq)]
Substitute for X¯ as ions are formed in
equal amounts and then rearrange equation
[H+(aq)]
=
[HX(aq)] Ka
mol dm-3
WORKED
EXAMPLE
Calculating pH - weak acids
Calculate the pH of a weak acid HX of concentration 0.1M ( Ka = 4x10-5 mol dm-3 )
HX dissociates as follows
Dissociation constant for a weak acid
H+(aq)
HX(aq)
Ka
=
+
X¯(aq)
[H+(aq)] [X¯(aq)] mol dm-3
[HX(aq)]
Substitute for X¯ as ions are formed in
equal amounts and the rearrange equation
[H+(aq)]
=
[HX(aq)] Ka
mol dm-3
ASSUMPTION
HA is a weak acid so it will not have dissociated very much. You can assume that its
equilibrium concentration is approximately that of the original concentration
WORKED
EXAMPLE
Calculating pH - weak acids
Calculate the pH of a weak acid HX of concentration 0.1M ( Ka = 4x10-5 mol dm-3 )
HX dissociates as follows
H+(aq)
HX(aq)
Dissociation constant for a weak acid
Ka
=
+
X¯(aq)
[H+(aq)] [X¯(aq)] mol dm-3
[HX(aq)]
Substitute for X¯ as ions are formed in
equal amounts and the rearrange equation
[H+(aq)]
=
[HX(aq)] Ka
mol dm-3
ASSUMPTION
HA is a weak acid so it will not have dissociated very much. You can assume that its
equilibrium concentration is approximately that of the original concentration
[H+(aq)]
ANSWER
=
0.1 x 4 x 10-5 mol dm-3
=
4.00 x 10-6
mol dm-3
=
2.00 x 10-3
mol dm-3
pH = - log [H+(aq)]
=
2.699
CALCULATING THE pH OF MIXTURES
The method used to calculate the pH of a mixture of an acid and an alkali depends on...
• whether the acids and alkalis are STRONG or WEAK
• which substance is present in excess
STRONG ACID and STRONG BASE - EITHER IN EXCESS
WEAK ACID and EXCESS STRONG BASE
STRONG BASE and EXCESS WEAK ACID
pH of mixtures
Strong acids and strong alkalis (either in excess)
1. Calculate the initial number of moles of H+ and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio; calculate unreacted moles species in excess
3. Calculate the volume of solution by adding the two original volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess the ion in mol dm-3
6. Convert concentration to pH
If the excess is
H+
pH = - log[H+]
If the excess is
OH¯
pOH = - log[OH¯]
then
pH + pOH = 14
or use Kw = [H+] [OH¯] = 1 x 10-14 at 25°C
[H+] = Kw / [OH¯]
pH = - log[H+]
then
therefore
pH of mixtures
WORKED
EXAMPLE
Strong acids and alkalis (either in excess)
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
pH of mixtures
WORKED
EXAMPLE
Strong acids and alkalis (either in excess)
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
25cm3 of
20cm3 of
0.1M NaOH
0.1M HCl
2.5 x 10-3
moles
2.0 x 10-3
moles
moles of OH ¯
= 0.1 x 25/1000
= 2.5 x 10-3
moles of H+
= 20 x 20/1000
= 2.0 x 10-3
WORKED
EXAMPLE
pH of mixtures
Strong acids and alkalis (either in excess)
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
25cm3 of
20cm3 of
0.1M NaOH
0.1M HCl
2.5 x 10-3
moles
2.0 x 10-3
moles
The reaction taking place is…
or in its ionic form
HCl + NaOH
H+ +
OH¯
NaCl
H2O
+
H2O
(1:1 molar ratio)
WORKED
EXAMPLE
pH of mixtures
Strong acids and alkalis (either in excess)
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
25cm3 of
20cm3 of
0.1M NaOH
0.1M HCl
2.5 x 10-3
moles
5.0 x 10-4
moles of OH¯
2.0 x 10-3
moles
The reaction taking place is…
HCl + NaOH
H+ +
or in its ionic form
UNREACTED
OH¯
NaCl
H2O
+
H2O
(1:1 molar ratio)
2.0 x 10-3 moles of H+ will react with the same number of moles of OH¯
this leaves
2.5 x 10-3
-
2.0 x 10-3 = 5.0 x 10-4 moles of OH¯ in excess
pH of mixtures
WORKED
EXAMPLE
Strong acids and alkalis (either in excess)
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
3. Calculate the volume of the solution by adding the two individual volumes
the volume of the solution is 25 + 20 = 45cm3
pH of mixtures
WORKED
EXAMPLE
Strong acids and alkalis (either in excess)
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
3. Calculate the volume of the solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
the volume of the solution is 25 + 20 = 45cm3
there are 1000 cm3 in 1 dm3
volume = 45/1000 = 0.045dm3
pH of mixtures
WORKED
EXAMPLE
Strong acids and alkalis (either in excess)
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
3. Calculate the volume of the solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess ion in mol dm-3
[OH¯]
= 5.0 x 10-4 / 0.045
= 1.11 x 10-2 mol dm-3
WORKED
EXAMPLE
pH of mixtures
Strong acids and alkalis (either in excess)
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
3. Calculate the volume of the solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess ion in mol dm-3
6. As the excess is OH¯ use
or
[OH¯]
[H+]
pH
= 5.0 x 10-4 / 0.045
= Kw / [OH¯]
= - log[H+]
pOH = - log[OH¯]
Kw
= [H+][OH¯]
then
pH + pOH = 14
so [H+] = Kw / [OH¯]
= 1.11 x 10-2 mol dm-3
= 9.00 x 10-13 mol dm-3
= 12.05
Kw = 1 x 10-14
mol2 dm-6 (at 25°C)
pH of mixtures
Weak acid and EXCESS strong alkali
1. Calculate the initial number of moles of H+ and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of the excess OH¯
3. Calculate the volume of solution by adding the two original volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess OH¯ in mol dm-3
6. Convert concentration to pH
either using
Kw = [H+] [OH¯]
= Kw / [OH¯]
[H+]
= 1 x 10-14 at 25°C
then
pH = - log[H+]
or
pOH
= - log[OH¯]
pH + pOH = 14
and
therefore
pH of mixtures
WORKED
EXAMPLE
Weak acid and EXCESS strong alkali
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
25cm3 of
22cm3 of 0.1M
0.1M NaOH
CH3COOH
2.5 x 10-3
moles
2.2 x 10-3
moles
moles of OH ¯
= 0.1 x 25/1000
= 2.5 x 10-3
moles of H+
= 22 x 20/1000
= 2.2 x 10-3
WORKED
EXAMPLE
pH of mixtures
Weak acid and EXCESS strong alkali
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of excess OH¯
25cm3 of
22cm3 of 0.1M
0.1M NaOH
CH3COOH
3.0 x 10-4
moles of OH¯
2.2 x 10-3
moles
2.5 x 10-3
moles
The reaction taking place is
UNREACTED
CH3COOH + NaOH
H+
or in its ionic form
+
OH¯
CH3COONa
H2O
+
H2O
(1:1 molar ratio)
2.2 x 10-3 moles of H+ will react with the same number of moles of OH¯
this leaves
2.5 x 10-3
-
2.2 x 10-3 = 3.0 x 10-4 moles of OH¯ in excess
pH of mixtures
WORKED
EXAMPLE
Weak acid and EXCESS strong alkali
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of excess OH¯
3. Calculate the volume of solution by adding the two individual volumes
the volume of the solution is 25 + 22 = 47cm3
pH of mixtures
WORKED
EXAMPLE
Weak acid and EXCESS strong alkali
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of excess OH¯
3. Calculate the volume of solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
the volume of the solution is 25 + 22 = 47cm3
there are 1000 cm3 in 1 dm3
volume = 47/1000 = 0.047dm3
WORKED
EXAMPLE
pH of mixtures
Weak acid and EXCESS strong alkali
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of excess OH¯
3. Calculate the volume of solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess ion in mol dm-3
the volume of the solution is 25 + 22 = 47cm3
there are 1000 cm3 in 1 dm3
volume = 47/1000 = 0.047dm3
[OH¯]
= 3.0 x 10-4 / 0.047
=
6.38 x 10-3 mol dm-3
WORKED
EXAMPLE
pH of mixtures
Weak acid and EXCESS strong alkali
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of excess OH¯
3. Calculate the volume of solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess ion in mol dm-3
6. As the excess is OH¯ use
pOH = - log[OH¯]
or
Kw = [H+][OH¯]
then
pH + pOH = 14
so [H+] = Kw / [OH¯]
[OH¯]
= 3x 10-4 / 0.045
=
6.38 x 10-3 mol dm-3
[H+]
= Kw / [OH¯]
=
1.57 x 10-12 mol dm-3
pH
= - log[H+]
=
11.8
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
This method differs from the others because the excess substance is weak and as
such is only PARTIALLY DISSOCIATED into ions. It is probably the hardest
calculation to understand.
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of the excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
4. Obtain the value of Ka for the weak acid and substitute the other values
5. Re-arrange the expression and calculate the value of [H+]
6. Convert concentration to pH using pH = - log[H+]
The following example shows you how to calculate the pH of the solution
produced by adding 20cm3 of 0.1M NaOH to 25cm3 of 0.1M CH3COOH
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
20cm3 of
25cm3 of 0.1M
0.1M NaOH
CH3COOH
2.0 x 10-3
moles
2.5 x 10-3
moles
moles of OH ¯
= 0.1 x 20/1000
= 2.0 x 10-3
moles of H+
= 25 x 20/1000
= 2.5 x 10-3
WORKED
EXAMPLE
WORKED
EXAMPLE
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
20cm3 of
25cm3 of 0.1M
0.1M NaOH
CH3COOH
2.0 x 10-3
moles
2.5 x 10-3
moles
The reaction taking place is
CH3COOH + NaOH
unreacted
CH3COOH
5.0 x 10-4
moles
CH3COONa
+
2.0 x 10-3 moles of H+ will react with the same number of H+; this leaves
2.5 x 10-3
-
2.0 x 10-3 = 5.0 x 10-4 moles of CH3COOH in excess
H2O
WORKED
EXAMPLE
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
20cm3 of
25cm3 of 0.1M
0.1M NaOH
CH3COOH
2.0 x 10-3
moles
2.5 x 10-3
moles
The reaction taking place is
CH3COOH + NaOH
CH3COONa
produced
2.0 x 10-3
moles
CH3COONa
+
2.0 x 10-3 moles of H+ will produce the same number of CH3COONa
this produces 2.0 x 10-3 moles of the anion CH3COO
H2O
WORKED
EXAMPLE
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
4. Obtain the value of Ka for the weak acid and substitute the other values
Substitute the number of
moles of anion produced
here... it will be the same as the
number of moles of H+ used up
Ka
Substitute
the Ka value
=
[H+(aq)] [CH3COO¯(aq)]
mol dm-3
[CH3COOH(aq)]
Substitute the number of
moles of unreacted acid here
WORKED
EXAMPLE
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
4. Obtain the value of Ka for the weak acid and substitute the other values
Substitute the number of
moles of anion produced
here... it will be the same as the
number of moles of H+ used up
1.7 x 10-5 =
[H+(aq)] x (2 x 10-3)
mol dm-3
(5 x 10-4)
Substitute
the Ka value
Substitute the number of
moles of unreacted acid here
WORKED
EXAMPLE
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
4. Obtain the value of Ka for the weak acid and substitute the other values
5. Re-arrange the expression and calculate the value of [H+]
[H+(aq)]
= 1.7 x 10-5 x 5 x 10-4
2 x 10-3
= 4.25 x 10-6 mol dm-3
mol dm-3
WORKED
EXAMPLE
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
4. Obtain the value of Ka for the weak acid and substitute the other values
5. Re-arrange the expression and calculate the value of [H+]
6. Convert concentration to pH using pH = - log[H+]
[H+(aq)]
= 1.7 x 10-5 x 5 x 10-4
2 x 10-3
= 4.25 x 10-6 mol dm-3
pH
= - log10[H+(aq)] = 5.37
mol dm-3
REVISION CHECK
What should you be able to do?
Calculate pH from hydrogen ion concentration
Calculate hydrogen ion concentration from pH
Write equations to show the ionisation in strong and weak acids
Calculate the pH of strong acids and bases knowing their molar concentration
Calculate the pH of weak acids knowing their Ka and molar concentration
Calculate the pH of mixtures of acids and bases
CAN YOU DO ALL OF THESE?
YES
NO
You need to go over the
relevant topic(s) again
Click on the button to
return to the menu
WELL DONE!
Try some past paper questions
pH calculations
THE END
© 2003 JONATHAN HOPTON & KNOCKHARDY PUBLISHING