1
TENDER FOR RENOVATION / REPAIR & INTERIOR DECORATION
WORKS AT MULTI DESCIPLINARY TRAINING CENTER, GANDHI
DARSHAN RAJGHAT NEW DELHI
ISSUED TO…………
M/s________________________________________________
COST OF TENDER DOCUMENT
:
Rs 2000/- ONLY
(DD of Rs. 2000/- will have to be attached with technical bid if downloaded from website),
SALE OF TENDER FORM
:
FROM 26.02.2016 to 03.03.2016 (from 10.00 hrs to 17.00 hrs) on working
days (Except Saturday, Sunday & Holidays) on 04.03.2016 up to 12.00
noon.
LAST DATE OF SUBMITION OF TENDER ON: 04.03.2016 UPTO 14.00 hrs
EARNEST MONY DEPOSIT
: Rs 50,000/-(Rupees Twenty thousand
only)
BACKGROUND
Khadi & Village Industries Commission (KVIC) is a statutory body created by
an Act of Parliament (No.61of 1956 and as amended by Act No. 12 of 1987
and Act No. 10 of 2006).
Khadi and village Industries commission have inherited its legacy from the
Gandhian constructive programmes and have its roots in the Swadeshi
movement which was started under the inspired guidance of Father of Nation
who established All India Spinner’s Association and All India Village Industries
Association to promote and develop traditional spinning, weaving and other
village Industries activities with a view to rejuvenating rural/village economy
which had witnessed massive destruction during foreign rule. And village
industries programmes are operating in all over the country covering
inaccessible, desert, hill and border areas such as Jaisalmer, Andaman &
Nicobar and Lakshadweep Islands bringing solace to rural unemployed
masses.
Khadi and Village Industries commission invites technical & financial bids in
separate sealed envelope from reputed, Firms/ Companies and individuals
having extensive experience and proven track record for the Repair and
internal renovation works in the Multi Disciplinary Training Center, KVIC
Gandhi Darshan Rajghat New Delhi 110 002. The details of work and other
terms & conditions is placed herewith:
2
MODE OF SELECTION
The Tender Committee will open the technical bids of the Organization /
Companies/firms/ individuals and do preliminary scrutiny to find out whether
the applicant fulfill the minimum eligibility prescribed in the tender document
based on which further short listing will be done and financial bids will be
opened in respect of short listed parties only. The final selection will be based
on the appraisal by the Committee on technical and financial bids.
The selected fabricator/Contractor/ firms/ individuals shall have to enter in to
an agreement with KVIC which shall contain the specific terms and conditions
governing the contract.
The decision of KVIC with regard to selection of the fabricator/Contractor will
be final binding and no communication in this regard will be entertained.
The bidder shall quote the price inclusive of all taxes as per schedule of rates
(financial bid). Evaluation shall be done on the basis of total price quoted by
the bidder for entire scope of work.
EMD
Earnest money of Rs. 50,000.00(Rupees Twenty Thousand only) by Demand
Draft in favor of “KVIC Trading A/C”, New Delhi” should enclose with the
technical bid. The EMD deposited shall be refunded in case the work is not
awarded. In case the work is awarded, the same will be kept as security
deposited till the satisfactory completing of work. The EMD can be for fitted in
case of non performance by the vendor bids without EMD shall be rejected
outright.
ELIGIBILITY CRITERIA
(I)
(II)
EMD in the form of Demand draft of Rs. 50,000/The interested agency must have proven track record and having
minimum of 3 years experience in Renovation, Interior works and
civil works etc.
(III)
They should have experience in working in Government, Public or
Private Sector Organization.
(IV)
TECHNICAL CAPECITY : The bidder shall have completed
successfully from start to finish during the past 3 years proceeding
(ending last day if month previous to the one in which applications
are invited) (a) Three similar completed works costing not less than
the amount equal to 40 % of the estimated cost or (b) Two similar
completed works costing not less than the amount equal to 50 %
of the estimated cost or (c) One similar completed works costing
not less than the amount equal to 80 % of the estimated cost.
The bidder should submitted client certificate in support of such
completed work.
(V)
3
(VI)
Bidder shall be submit Income Tax return certificate for the last 3
year and service Tax/ VAT registration certificate Pan No. etc along
with technical bids.
The bidding organization/ company / firm must have achieved a
minimum average annual turnover during last three years ending
31st March of the previous financial year should be at least Rs.25.00
lakh for the last three consecutive years.
(VII)
Submission of bidsThe bidder will have to submit the bid in two separate sealed envelopes.
a. First envelop super scribed “Technical Bid” will contain
i.
ii.
iii.
iv.
DD of Rs.2000/- towards tender cost,
Earnest money in the form of Bank Draft
Latest Income tax assessment / copy of IT return for the last three
years.
Detail of experience duly supported with documents, list of clients
etc.
b. Second envelop will contain Financial bid super scribed as “ Financial
bid”
Bid without EMD, Income Tax assessment order / copy of IT return / copy
of valid service tax certificate, profile of the agency, minimum required
experience will be summarily rejected. Interested parties may visit the
premises in working hours except Saturday, Sunday and holidays.
GENERAL TERMS AND CONDITIONS
Offers are invited from parties having experience in Repair, renovation &
Interior Decoration works. The relevant documents in support of experience
to be produced with the technical bid.
Other terms and condition are as under:
Earnest money shall be forfeited in the case of:
1. Revocation of tender to increase in rates after opening of the tender but
before validity of the quotation expires.
2. Refusal to enter into contract after the award to contract.
3. On verification of the credential of the successful bidder after the opening
the technical/ financial bid or during execution of the work, if it is found that
the details furnished by the successful bidder regarding its location of the
office etc. are false or incorrect, in that event the amount of EMD furnished
by the bidder will reliable forfeited, apart from initiating other legal action,
as deemed fit.
4. The EMD shall be returned to the unsuccessful bidders after the award of
the contract and upon receipt of security deposit.
4
5. The bidder should strictly follow the design details and specifications during
execution and carry out work to the complete satisfaction of the Khadi &
Village Industries Commission.
6. The bidder should complete the work as per the schedule given in the tender
document.
7. The bidder should be systematic in work as well as in keeping the work
place neat and clean. Quality will be of prime importance.
8. The rates should be quoted inclusive of all taxes and inclusive of installation
charges.
9. The contract shall be subject to the Indian Laws and the jurisdiction of the
courts, located in New Delhi.
10.Tender shall be awarded to eligible lowest bidder for entire work.
11. The work should be completed within 21 days from award of works
to the contactor.
12. 5% payment will be retained; payment of same will be made after 6
months of defect liability period.
13.Tender not properly filled, mutilated, with incorrect calculations or generally
not complying with the conditions may be rejected.
TERMINATION OF CONTRACT:
a. If at any time Khadi & Village Industries Commission finds that the
work of the Fabricator/ Contractor is not satisfactory as per the
approved design or the progress of the work is very slow and not of
the required speed, Khadi & Village Industries Commission can
terminate the contract and award the same to one or more parties in
the panel to complete the assignment within required time. In such
an event, Fabricator/ Contractor who has failed in the performance
shall be liable for penalty.
b. All instructions, notices and communications etc. under the contract
given in writing and if sent to the last known place of the business,
shall deem to have been served on the date, even in ordinary post,
these would have been delivered to the party.
c. Khadi & Village Industries Commission will have the right to reject or
accept any offer without assigning any reason thereof and under no
circumstances, will be bound to accept lowest offer.
ARBITRATION
If dispute arise out of or in connection with this contract/agreement, the
parties agrees either to seek an amicable settlement of that dispute by
cancelation under the ICADR conciliation Rules, 1996 or to submit that
dispute to arbitration under the ICADR Arbitration Rules, 1996.
PERFORMANCE GUARANTY/ LIQUDATED DAMAGES FOR DAY
The EMD of Rs. 50,000/- will be converted into performance guaranty incase
of failure/delay in implementation / completion of work as per schedule.
DEVIATION
5
The party must comply with the tender specification and all terms and
condition of contract. No deviation shall be entertained unless specifically
mentioned by the party in the bid.
TAX DEDUCTION AT SOURCE
Income tax and other taxes shall be deducted at source from the running
bills as per applicable tax rules.
The tender shall remain valid for acceptance for a period of 30 days from
the date of the opening of the tender.
Fabricator/ Contractor Rates
The all taxes such as sales tax, service tax, VAT, excise duty and octroi etc.
will be charged as per prescribed rates .
COMMENCEMENT OF WORK / PERIOD OF COMPLETION
The Fabricator/ Contractor shall commence work on site from the date of
award of work and it should be completed within a period of 21days.
Contract signing
After acceptance of the tender, the Fabricator/ Contractor shall sign the
necessary contract papers within seven days of the intimation. Expenses
for the agreement including cost of stamp papers etc. shall be bon by the
Fabricator/ Contractor. In case of delay the Earnest Money’ may be for
fitted.
Acceptance of Tender
The acceptance of the tender will rest with the employer, who does not bind
himself to accept the lowest tender and reserves to himself the authority to
reject any or all of the tender’s received, without assigning any reason(s),
the employers reserves the right of accepting the whole or any part of the
tenders received the contractor shall be bound to perform the same at their
quoted rates.
Escalation
 No escalation of cost or any other statutory levy/tax will be paid to the
Fabricator/ Contractor during the execution of the project. No alteration
in this clause will be acceptable.
 The Fabricator/ Contractor shall execute aforesaid work with best
quality of workmanship to the fullest satisfaction of khadi & Village
Industries Commission or its authorized representative.
 If Additional Changes on demand of the department (which is
mandatory to be executed) other than the agreement in course of
execution it will be paid on the bases of DSR rates, allowing escalation
as per rules.
 The work should be executed as per the norms of lump-sum tender for
the work covered under scope of offer and payment would be made in
three installments in form of running bills.
6
PRINCIPAL
7
ANNEXURE-I
TECHNICAL BID
Sr.
No.
1.
Documents to be enclosed
Details with supporting documents
Name of the Firm
2.
Complete address for correspondence
3.
Contact No.
A. Fax No.
B. Landline No.
4.
5.
6.
7.
8.
9.
10.
C. Mobile No.
D. E-Mail Id
Bidders should be Registered/ empanelled/having
experience in working of similar work with any one of
the Govt. Deptt. Such as CPWD/ State PWD/ KVIC and
Public sector undertakings engineering Deptts. (PSUs)
for carrying out the work/s specified in the scope of
work.
Bidders should have valid VAT/Service Tax Registration.
Bidders should have experience of:
a) Three similar jobs of completed value not less
than Rs.10.00 lakhs each.
OR
b) Two similar jobs of completed value not less
than Rs.12.00 lakhs each.
OR
c) One similar job of completed value not less than
RS.20.00 lakhs.
Bidders should have Income Tax returns for the last
three preceding years 2012-13, 2013-14 & 2014-15
The list of clients/ Department to whom the work was
executed for last 3 years, the copy of work of
completion should be enclosed.
DD for Tender Cost of Rs.2000/- (if tender downloaded
from web site).
EMD of Rs.50000/-
Reg. No:
DD No:…………………….Dated:………….
DD No:…………………….Dated:…………..
This is to certify that the information given above is true and best of my knowledge.
Signature & Seal of Bidder.
8
LIST OF APPROVED MAKERS & MATERIALS FOR CIVIL WORKS
Sr.
No.
1
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Name of item
OPC
Recommended
Manufacturers/Brand
Gujrat, Ambuja, I&I’ ACC, Birla, JK,
Birla.
Steel, Mild Steel, Cold existed Sail, TISCO OR HOSCO
Detarment Bars
External Paint
Snowcem India, Nerolac, Asian dulux.
Internal Paint
ICI, Jenson & Nicholson, Nerolac, Asian.
Present Metal Repairs
Windos, Sen Harvic, AGEW
Rolling Sutters, Grills
Standard Swastik
(a) Flush Door
Anand, Kitply, Anchor, National
(b) Veneer
Jackson, Anchor, National
Hardware-Locks, Floor Springs/ Shalimars, Navbharat, Godraj, Yale,
Door closers, screws
ACME, Everite, Hardwyn, Nettleford.
Water proofing compound
Imperms, Coco, STP, Fosroe, fairmat.
Pre-laminate particle Board
Navalam Neela, ECC.
Laminates
Formikca, Decolam, Sunmica.
Commercial Plywood.
Century, Anchor, Archid Ply, Tuff Ply,
Kit Ply.
Polysulphide/Silicon/
Piddilite, GE Silicon, Fosroe, Rotte,
Sealant/Additive/Hardner
Ironote, Ferrok.
Specialized Agencies
(a)Water Proofing
Likeproof India Put., india Water
Proofing Co., Alwel Waterproofing Co.
of approved equivalent.
(b)Anti Termite Treatment
Pest Control (India), Pest Control (Dr.
Swaroop) Ltd., of approved equivalent.
PVC Conduits and accessories
Precision, Garware, Asian
Spartex Floor tiles
KAJARIA/ VARMORA/JHONSON
Vetriified Floor tiles
KAJARIA/ VARMORA/JHONSON
Ceremic Glazed wall tiles
KAJARIA/ VARMORA/JHONSON
Water Cloed/WHB
Hindustan Perryware/NICER
9
MULTI DISCIPLINARY TRAINI9NG CENTRE,
KHADI AND VILLAGE INDUSTRIES COMMISSION,
GHANDHI DARSHAN, RAJGHAT, NEW DELHI
Website: www.kvic.org.in
No. MDTC/KVIC/New Delhi/Bldg. Maint./part-II/2015-16
Date: 25/02/2016
NOTICE INVITING TENDER
MDTC, KVIC invites sealed quotations/tenders for renovation work of office building
from the contractors registered with State PWD, CPWD, KVIC and Public Sector undertaking
Engineering depts.
Sr. Name of Work
No.
1.
App.
Est.
Value
of
work
Repair/renovation 25.00
of various rooms lakhs
and toilet
Cost of E.M.D Last date for
Blank
. Rs.
issue
of
Tender
blank
Rs.
Tender
document
2000/- 50000/ 04/03/2016
up to 12.00
hrs.
Due date &
Time for
submission
of sealed
tender
04/03/2016
up to 14.00
hrs.
Duration
for
completion
of work
21 days
Interested parties may download terms and conditions and other details of tenders from our
website www.kvic.org.in or they may obtain tender document from above address during 10.00
hrs to 17.00 hrs from 26/02/16 to 03/03/2016 and on 04/03/2016 up to 12.00 hrs on all working
days except Saturday, Sunday & holidays by paying Rs.2000/- those who download the tender
documents from website shall enclose a DD of Rs.2000/- favoring “KVIC TRADING A/C”
payable at Delhi with technical bid. The detailed terms and conditions containing scope of
work, eligibility criteria, selection process, award of contract etc. have been specified in the
Tender document. KVIC reserve the right to accept or reject any or all the tender without
assigning any reason. Duly filled in tender should reach at above address latest by 04/03/2016
by 14.00 hrs. Tenders shall be opened at above address on same day at 15.00 hrs. Tenders
received after the due date and time shall not be opened.
PRINCIPAL
MDTC, KVIC, Delhi
10
ESTIMATE FOR RENOVATION WORK OF CHARKHA DEMONSTRATION ROOM
OF SIZE 40'x40' (12 mx12m) AT MTDC, KHADI & V.I.COMMISSION,GANDHI
DARSHAN, RAJGHAT, NEW DELHI
SCOPE OF WORK: DISMENTLING, FILLING, CONCRETING,BRICK WORK, PLASTRING,
FLOOING, FASE CEILLING, DOORS AND WINDOWS ETC.
Sr
No.
1
Item
Code
15.7.4
2
2.38
3
6.4.2
4
5.3
5
13.3.1
6
13.8
Rate
Description of item
Demolishing brick work manually/ by mechanical
means including stacking of serviceable material
and disposal of unserviceable material within 50
metres lead as per direction of Engineer-incharge.In cement mortar
Filling with available fly ash and earth (excluding
rock) in trenches or embankment in layers (each
layer should not exceed 15 cm), with
intermediate layer of compacted earth (Soil
density of 98%) after every four layers of
compacted depth of fly ash, sides & top layer of
filling shall be done with earth having total
minimum compacted thickness 30 cm or as
decided by Engineer -in-charge, including
compacting each layer by rolling/ ramming and
watering, all complete as per drawing and
direction of Engineer-in-charge.
Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V
level in all shapes and sizes in : Cement mortar
1:6 (1 cement : 6 coarse sand)
Reinforced cement concrete work in beams,
suspended floors, roofs having slope up to 15°
landings, balconies, shelves, chajjas, lintels,
bands, plain window sills, staircases and spiral
stair cases up to floor five level, excluding the cost
of centering, shuttering, finishing and
reinforcement, with 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal
size
20 mm cement plaster of mix :1:4 (1 cement: 4
fine sand)
Providing and applying white cement based putty
of average thickness 1 mm, of approved brand
and manufacturer, over the plastered wall surface
to prepare the surface even and smooth
complete.
Total Qty
2
Cu M
21.6
Cu M
4.5
Cu M
0.2025
Cu M
154.8
Sq M
108.36
Sq M
Amount
11
7
11.41.2
8
Providing and laying vitrified floor tiles in
different sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08% and conforming to IS : 15622, of approved
make, in all colours and shades, laid on 20mm
thick cement mortar 1:4 (1 cement : 4 coarse
sand), including grouting the joints with white
cement and matching pigments etc., complete.
Size of Tile 600x600 mm
144
Sq M
43.2
Sq M
0.1
Cu M
10.08
Sq M
Providing and laying rectified Wall tiles in
different sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08% and conforming to IS : 15622, of approved
make, in all colours and shades, laid on 20mm
thick cement mortar 1:4 (1 cement : 4 coarse
sand), including grouting the joints with white
cement and matching pigments etc., complete.
standard Size of Tile.
9
9.1.2
Providing wood work in frames of doors,
windows, clerestory windows and other frames,
wrought framed and fixed in position with hold
fast lugs or with dash fasteners of required dia &
length (hold fast lugs or dash fastener shall be
paid for separately). Sal wood
10
9.21
Providing and fixing ISI marked flush door
shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction
with frame of 1st class hard wood and well
matched commercial 3 ply veneering with vertical
grains or cross bands and face veneers on both
faces of shutters:25 mm thick (for cupboard)
including ISI marked nickel plated bright finished
M.S. piano hinges with necessary screws including
polishing.
12
11
12.29
Providing and fixing false ceiling with 12 mm thick
plain/ semi perforated or with design ceiling tiles
of BWP type phenol formaldehyde synthetic resin
bonded pressed particle board conforming to
IS:3087, Erolite maker finished with a coat of
aluminium primer on both sides & edges,
including two coats of synthetic enamel paint of
approved quality on exposed face, fixed to a grid
made out of anodised aluminium (with 15 micron
anodic coating) Tsections 35 x15x1.5 mm size
main runners, cross runners 23.5x19x1.5 mm
fixed to main runners placed 600 mm centre to
centre both ways so as to form a grid of 600 mm
square. The frame work shall be suspended from
ceiling by level adjusting hangers of 6 mm dia M.S
rod fixed to roof slab by means of ceiling cleats
and dash fastener. The suspenders shall be placed
600 x 1200 mm centre to centre including fixing
to the frame with C.P brass screws and applying a
priming coat of zinc chromate yellow primer
including necessar cutting.
12
13.3.1
13
KVIC
Painting with plastic paint, having VOC (Volatile
Organic Compound) content less than 150 grams/
litre, of approved brand and manufacture,
including applying additional coats wherever
required to achieve even shade and colour Two
coats
Providing and fixing allumenium powder coated
fixed /openable window with frame tube of size
4"X1.5" in 16 guage (Jindal make), shutter in 3/4"
in series with locking patty, hinges,stay rod and
locking arrangement etc including clear glass in
shuttters of reputed brand complete.
14
KVIC
Providing and fixing venetian blinds of reputed
make selected colour and design including all
necessary fittings for window.
15
9.76
Providing and fixing bright finished brass 100 mm
mortice latch and lock with 6 levers and a pair of
lever handles of approved quality with necessary
screws etc. complete.
16
9.82
Providing and fixing bright finished brass hanging
type floor door stopper with necessary screws,
etc. complete.
17
9.84
Providing and fixing aluminium extruded section
body tubular type universal hydraulic door closer
(having brand logo with ISI, IS : 3564, embossed
on the body, door weight upto 36 kg to 80 kg and
door width from 701 mm to 1000 mm), with
double speed adjustment with necessary
accessories and screws etc. complete.
144
Sq M
108.36
Sq M
5.76
Sq M
3.25
Sq M
2
Nos
2
Nos
2
Nos
13
18
9.97.3
Providing and fixing aluminium tower bolts, ISI
marked, anodised (anodic coating not less than
grade AC 10 as per IS : 1868 ) transparent or dyed
to required colour or shade, with necessary
screws etc. complete : 200x10 mm
19
1.8.3
20
KVIC
21
2.8.6
Supplying and fixing following way prewired
TP&N MCB distribution board of steel sheet for
415 volts on surface/ recess complete with loose
wire box, terminal connectors for all ncoming
and outgoing circuits, duly prewired with suitable
size FR PVC insulated copper conductor up to
terminal blocks, tinned copper bus bar, neutral
link, earth bar, din bar, detachable gland plate,
interconnections, powder painted including
earthing etc. as required.(But without MCB/
RCCB/ Isolator)
22
Mkt
Rate
Providing and fixing Ceilling lights with 02 Nos 36
Watts four pin tube and electric chowk.
23
1.53
Supplying and drawing of UTP 4 pair CAT 6 LAN
Cable in the existing surface/ recessed steel/ PVC
conduit as required.
24
2.1.1
25
KVIC
26
KVIC
app
rate
A.)Wiring for light point/ fan point/ exhaust fan
point/ call bell point with 1.5 sq.mm FR PVC
insulated copper conductor single core cable in
surface / recessed medium class PVC conduit,
with piano type Modular switches, phenolic
laminated sheet, suitable size M.S. box and
earthing the point with 1.5 sq.mm. FR PVC
insulated copper conductor single core cable etc
as required.
B) Ditto as per item no.21 above but wiring with
2.5 sq.mm for power ponit
Providing and fixing following capacity TP&N
disconnector fuse switch unit inside the existing
panel board with ISI marked HRC fuses including
drilling holes in cubicle panel, making
connections, etc. as required. 32 Amp TP&N for
A.C
Providing and fixing 16 inches wall fans including
necessary fitting of brackets etc of standard make
eg Usha, Khaitan, Orient, Polar (ISI Mark).
Repairing of R.C.C. structure members Viz
Column, beam, and slab by removing loose
concrete, rust from the reinforcement steel by
machenical merans apply polylack EP+ cement
slurry 1:1 ratio as a primer cum bounding coat,
preparing of special polymer mortar as per
manufacturer direction, placing this mortar by
hand in layers of 10 mm thick and finished 1:4
cement plaster inluding shuttering, props, curing
etc complete.
Total
4
Nos
70
Nos
10
Nos
1
Nos
36
Nos
50
R
Metre
2
Nos
16
Nos
7.2
Sq M
14
ESTIMATE FOR RENOVATION WORK OF BEUTICIAN ROOM 20'x20' (6x6m) AT MTDC, KHADI &
V.I.COMMISSION,GANDHI DARSHAN, RAJGHAT, NEW DELHI
SCOPE OF WORK: DISMENTLING, FILLING, CONCRETING,BRICK WORK, PLASTRING, FLOOING, FASE CEILLING,
ELECTRIFICATION, DOORS AND WINDOWS ETC.
Sr
No.
1
Item
Code
15.7.4
2
6.4.2
3
5.3
4
13.3.1
Rate
Description of item
Demolishing brick work manually/ by
mechanical means including stacking of
serviceable material and disposal of
unserviceable material within 50 metres
lead as per direction of Engineer-incharge.In cement mortar
Brick work with common burnt clay F.P.S.
(non modular) bricks of class designation 7.5
in superstructure above plinth level up to
floor V level in all shapes and sizes in :
Cement mortar 1:6 (1 cement : 6 coarse
sand)
Reinforced cement concrete work in beams,
suspended floors, roofs having slope up to
15° landings, balconies, shelves, chajjas,
lintels, bands, plain window sills, staircases
and spiral stair cases up to floor five level,
excluding the cost of centering, shuttering,
finishing and reinforcement, with 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size
Total Qty
0.5
Cum
1.13
Cum
0.101
Cum
79.2
Sq M
55.44
Sq M
36
Sq M
20 mm cement plaster of mix :1:4 (1
cement: 4 fine sand)
5
13.8
Providing and applying white cement based
putty of average thickness 1 mm, of
approved brand and manufacturer, over the
plastered wall surface to prepare the
surface even and smooth complete.
6
11.41.2
a. Providing and laying vitrified floor tiles
Kajariya make in with water absorption less
than 0.08% and conforming to IS : 15622, of
approved make, in all colours and shades,
laid on 20mm thick cement mortar 1:4 (1
cement : 4 coarse sand), including grouting
the joints with white cement and matching
pigments etc., complete. Size of Tile
600x600 mm
Amount
15
7
b. Providing and laying rectified Wall tiles in
different sizes (thickness to be specified by
the manufacturer) with water absorption
less than 0.08% and conforming to IS :
15622, of approved make, in all colours and
shades, laid on 20mm thick cement mortar
1:4 (1 cement : 4 coarse sand), including
grouting the joints with white cement and
matching pigments etc., complete. Size of
Tile 300x450 mm
8
9.1.2
Providing wood work in frames of doors,
windows, clerestory windows and other
frames, wrought framed and fixed in
position with hold fast lugs or with dash
fasteners of required dia & length (hold fast
lugs or dash fastener shall be paid for
separately). Sal wood
9
9.21
Providing and fixing ISI marked flush door
shutters conforming to IS : 2202 (Part I)
non-decorative type, core of block board
construction with frame of 1st class hard
wood and well matched commercial 3 ply
veneering with vertical grains or cross bands
and face veneers on both faces of
shutters:25 mm thick (for cupboard)
including ISI marked nickel plated bright
finished M.S. piano hinges with necessary
screws including polishing.
16.2
Sq M
0.051
2.52
Sq M
16
10
12.29
11
13.3.1
12
21.1
Providing and fixing false ceiling with 12 mm
thick plain/ semi perforated or with design
ceiling tiles of BWP type phenol
formaldehyde synthetic resin bonded
pressed particle board conforming to
IS:3087, Erolite maker finished with a coat
of aluminium primer on both sides & edges,
including two coats of synthetic enamel
paint of approved quality on exposed face,
fixed to a grid made out of anodised
aluminium (with 15 micron anodic coating)
Tsections 35 x15x1.5 mm size main runners,
cross runners 23.5x19x1.5 mm fixed to main
runners placed 600 mm centre to centre
both ways so as to form a grid of 600 mm
square. The frame work shall be suspended
from ceiling by level adjusting hangers of 6
mm dia M.S rod fixed to roof slab by means
of ceiling cleats and dash fastener. The
suspenders shall be placed 600 x 1200 mm
centre to centre including fixing to the
frame with C.P brass screws and applying a
priming coat of zinc chromate yellow primer
including necessar cutting.
36
sqm
55.44
sqm
4.8
sqm
5.98
Sqm
1
No
Painting with plastic paint, having VOC
(Volatile Organic Compound) content less
than 150 grams/ litre, of approved brand
and manufacture, including applying
additional coats wherever required to
achieve even shade and colour Two coats
Providing and fixing allumenium powder
coated fixed /openable window with frame
tube of size 4"X1.5" in 16 guage (Jindal
make), shutter in 3/4" in series with locking
patty, hinges,stay rod and locking
arrangement etc including clear glass in
shuttters of reputed brand complete.
13
KVIC
Providing and fixing venetian blinds of
reputed make selected colour and design
including all necessary fittings for window.
14
9.76
Providing and fixing bright finished brass
100 mm mortice latch and lock with 6 levers
and a pair of lever handles of approved
quality with necessary screws etc. complete.
17
15
9.82
Providing and fixing bright finished brass
hanging type floor door stopper with
necessary screws, etc. complete.
17
9.84
Providing and fixing aluminium extruded
section body tubular type universal
hydraulic door closer (having brand logo
with ISI, IS : 3564, embossed on the body,
door weight upto 36 kg to 80 kg and door
width from 701 mm to 1000 mm), with
double speed adjustment with necessary
accessories and screws etc. complete.
18
9.97.3
Providing and fixing aluminium tower bolts,
ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868 )
transparent or dyed to required colour or
shade, with necessary screws etc. complete
: 200x10 mm
19
1.8.3
A.)Wiring for light point/ fan point/ exhaust
fan point/ call bell point with 1.5 sq.mm FR
PVC insulated copper conductor single core
cable in surface / recessed medium class
PVC conduit, with piano type Modular
switches, phenolic laminated sheet, suitable
size M.S. box and earthing the point with
1.5 sq.mm. FR PVC insulated copper
conductor single core cable etc as required.
20
KVIC
B) Ditto as per item no.19 above but wiring
with 2.5 sq.mm for power ponit
21
2.8.6
Supplying and fixing following way prewired
TP&N MCB distribution board of steel sheet
for 415 volts on surface/ recess complete
with loose wire box, terminal connectors for
all ncoming and outgoing circuits, duly
prewired with suitable size FR PVC insulated
copper conductor up to terminal blocks,
tinned copper bus bar, neutral link, earth
bar, din bar, detachable gland plate,
interconnections, powder painted including
earthing etc. as required.(But without MCB/
RCCB/ Isolator)
22
23
Providing and fixing Ceilling lights with 02
Nos 36 Watts four pin tube and electric
chowk.
1.53
Supplying and drawing of UTP 4 pair CAT 6
LAN Cable in the existing surface/ recessed
steel/ PVC conduit as required.
1
No
1
No
1
No
20
No
10
No
1
No
9
No
20
R
Metre
18
24
2.1.1
Providing and fixing following capacity TP&N
disconnector fuse switch unit inside the
existing panel board with ISI marked HRC
fuses including drilling holes in cubicle
panel, making connections, etc. as required.
32 Amp TP&N for A.C
25
KVIC
26
KVIC
Providing and fixing 16 inches wall fans
including necessary fitting of brackets etc of
standard make eg Usha, Khaitan, Orient,
Polar (ISI Mark).
Repairing of R.C.C. structure members Viz
Column, beam, and slab by removing loose
concrete, rust from the reinforcement steel
by machenical merans apply polylack EP+
cement slurry 1:1 ratio as a primer cum
bounding coat, preparing of special
polymer mortar as per manufacturer
direction, placing this mortar by hand in
layers of 10 mm thick and finished 1:4
cement plaster inluding shuttering, props,
curing etc complete.
27
17.10.1.4
28
17.32.2
Providing and fixing Stainless Steel A ISI 304
(18/8) kitchen sink as per IS: 13983 with C.I.
brackets and stainless steel plug 40 mm,
including painting of fittings and brackets,
cutting and making good the walls wherever
required : 510x1040 mm bowl depth 178
mm
Providing and fixing mirror of superior glass
(of approved quality) and of required shape
and size with plastic moulded frame of
approved make and shade with 6 mm thick
hard board backing :
Total
1
No
4
No
14.4
Sq M
2
Nos
2
Nos
19
ESTIMATE FOR RENOVATION WORK OF OFFICE TOILET MTDC,
KHADI & V.I.COMMISSION,GANDHI DARSHAN, RAJGHAT, NEW
DELHI
QUANTITY OF WORK
Sr
No.
Item
Code
Description of item
1
15.7.4
2
6.13.2
3
5.3
4
13.6.2
Demolishing brick work manually/ by
mechanical means including stacking of
serviceable material and disposal of
unserviceable material within 50
metres lead as per direction of
Engineer-in-charge. In cement mortar
Half brick masonry with common burnt
clay F.P.S. (non modular) bricks of class
designation 7.5 in Superstructure
above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse
sand)
Reinforced cement concrete work in
beams, suspended floors, roofs having
slope up to 15° landings, balconies,
shelves, chajjas, lintels, bands, plain
window sills, staircases and spiral stair
cases up to floor five level, excluding
the cost of centering, shuttering,
finishing and reinforcement, with 1:2:4
(1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size).
20 mm cement plaster of mix :1:6 (1
cement: 6 fine sand)
5
11.41.2
6
Providing and laying vitrified floor tiles
in different sizes (thickness to be
specified by the manufacturer) with
water absorption less than 0.08% and
conforming to IS : 15622, of approved
make, in all colours and shades, laid on
20mm thick cement mortar 1:4 (1
cement : 4 coarse sand), including
grouting the joints with white cement
and matching pigments etc., complete.
Size of Tile 600x600 mm
Providing and laying rectified Wall tiles
in different sizes Kajariya make with
water absorption less than 0.08% and
conforming to IS : 15622, of approved
make, in all colours and shades, laid on
20mm thick cement mortar 1:4 (1
cement : 4 coarse sand), including
grouting the joints with white cement
and matching pigments etc., complete.
standard Size of Tile.. Size of Tile
300x450 mm
Total Qty
5.52
Cu M
19.275
Sq M
0.055
Cu M
30
Sq M
16.43
Sq M
42.63
Sq M
Rate
Amount
20
7
9.1.2
8
9.76
9
9.82
10
9.84
11
9.97.3
12
12.29
Providing wood work in frames of
doors, windows, clerestory windows
and other frames, wrought framed and
fixed in position with hold fast lugs or
with dash fasteners of required dia &
length ( hold fast lugs or dash fastener
shall be paid for separately). Sal wood
Providing and fixing bright finished
brass 100 mm mortice latch and lock
with 6 levers and a pair of lever
handles of approved quality with
necessary screws etc. complete.
Providing and fixing bright finished
brass hanging type floor door stopper
with necessary screws, etc. complete.
Providing and fixing aluminium
extruded section body tubular type
universal hydraulic door closer (having
brand logo with ISI, IS : 3564,
embossed on the body, door weight
upto 36 kg to 80 kg and door width
from 701 mm to 1000 mm), with
double speed adjustment with
necessary accessories and screws etc.
complete.
Providing and fixing aluminium tower
bolts, ISI marked, anodised (anodic
coating not less than grade AC 10 as
per IS : 1868 ) transparent or dyed to
required colour or shade, with
necessary screws etc. complete :
200x10 mm
Providing and fixing false ceiling with
12 mm thick plain/ semi perforated or
with design ceiling tiles of BWP type
phenol formaldehyde synthetic resin
bonded pressed particle board
conforming to IS:3087, finished with a
coat of aluminium primer on both sides
& edges, including two coats of
synthetic enamel paint of approved
quality on exposed face, fixed to a grid
made out of anodised aluminium (with
15 micron anodic coating) Tsections 35
x15x1.5 mm size main runners, cross
runners 23.5x19x1.5 mm fixed to main
runners placed 600 mm centre to
centre both ways so as to form a grid
of 600 mm square. The frame work
shall be suspended from ceiling by
level adjusting hangers of 6 mm dia
M.S rod fixed to roof slab by means of
ceiling cleats and dash fastener. The
suspenders shall be placed 600 x 1200
mm centre to centre including fixing to
the frame with C.P brass screws and
applying a priming coat of zinc
0.338
Cu M
2
Nos
2
Nos
2
Nos
5
Nos
7.875
Sq M
21
chromate yellow primer (aluminium
frame work shall be paid separately).
13
9.21
14
17.1.1
15
17.2.1
16
18.7
17
18.7.1
Providing and fixing ISI marked flush
door shutters conforming to IS : 2202
(Part I) non-decorative type, core of
block board construction with frame of
1st class hard wood and well matched
commercial 3 ply veneering with
vertical grains or cross bands and face
veneers on both faces of shutters:25
mm thick (for cupboard) including ISI
marked nickel plated bright finished
M.S. piano hinges with necessary
screws
Providing and fixing water closet
squatting pan (Indian type W.C. pan )
with 100 mm sand cast Iron P or S trap,
10 litre low level white P.V.C. flushing
cistern, including flush pipe, with
manually controlled device (handle
lever) conforming to IS : 7231, with all
fittings and fixtures complete,
including cutting and making good the
walls and floors wherever required:
White Vitreous china Orissa pattern
W.C. pan of size 580x440 mm with
integral type foot rests
Providing and fixing white vitreous
china pedestal type water closet
(European type W.C. pan) with seat
and lid, 10 litre low level white P.V.C.
flushing cistern, including flush pipe,
with manually controlled device
(handle lever), conforming to IS : 7231,
with all fittings and fixtures complete,
including cutting and making good the
walls and floors wherever required :
W.C. pan with ISI marked white solid
plastic seat and lid
Providing and fixing Chlorinated
Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water
supply, including all CPVC plain & brass
threaded fittings, including fixing the
pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings
with one step CPVC solvent cement
and testing of joints complete as per
direction of Engineer
in Charge.
15 mm nominal outer dia Pipes
7.875
Sq M
2
Sq M
2
Nos
10
Metre
22
18
18.7.2
20 mm nominal outer dia Pipes
10
Metre
19
18.7.3
25 mm nominal outer dia Pipes
10
Metre
20
17.31
21
18.15.1
22
18.15.2
23
18.16.1
24
18.16.2
25
19.4.2
26
19.30.3.1
Providing and fixing 600x450 mm
beveled edge mirror of superior glass
(of approved quality) complete with 6
mm thick hard board ground fixed to
wooden cleats with C.P. brass screws
and washers complete.
Providing and fixing brass bib cock of
approved quality : 15 mm nominal
bore
Providing and fixing brass bib cock of
approved quality20 mm nominal bore
each
Providing and fixing brass stop cock of
approved quality : 15 mm nominal
bore
Providing and fixing brass stop cock of
approved quality :20 mm nominal bore
With Sewer bricks conforming to IS :
4885 150 x 100 mm size P type SUB
with C.I. grating brick masonry
chamber with water tight C.I. cover
with frame o f 300 x300 mm size
(inside) the weight of cover to be not
less than 4.50 kg and frame to be not
less than 2.70 kg as per standard
design:
Constructing brick masonry chamber
for underground C.I. inspection
chamber and bends with bricks in
cement mortar 1:4 (1 cement : 4
coarse sand) C.I. cover with frame
(light duty) 455x610 mm internal
dimensions, total weight of cover with
frame to be not less than 38 kg (weight
of cover 23 kg and weight of frame 15
kg), R.C.C. top slab with 1:2:4 mix (1
cement: 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size),
foundation concrete 1:5:10 (1 cement :
5 fine sand : 10 graded stone aggregate
40 mm nominal size), inside plastering
12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand), finished
smooth with a floating coat of neat
cement on walls and bed concrete etc.
complete as per standard design:With
common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
2
Nos
2
Nos
2
Nos
2
Nos
2
Nos
5
Nos
2
Nos
23
27
17.4.3
28
29
30
31
1.8.3
32
2.1.1
Providing and fixing white vitreous
china flat back or wall corner type
lipped front urinal basin of
430x260x350 mm and 340x410x265
mm sizes respectively with automatic
flushing cistern with standard flush
pipe and C.P. brass spreaders with
brass unions and G.I clamps complete,
including painting of fittings and
brackets, cutting and making good the
walls and floors wherever required
:Range of three urinal basins with
10litre white P.V.C. automatic flushing
cistern
Providing and fixing 150,mm dia swg
spun pipe one side socket including
necessary excavation, laying jointing
and pointing in cement mortar 1:3 (1
Cement: 3 sand) and return filling
levelling etc complte
Polyethylene water storage tank with
cover and suitable locking arrangement
of 5000 litres
Vent Pipe 100 MM dia
Wiring for light point/ fan point/
exhaust fan point/ call bell point with
1.5 sq.mm FR PVC insulated copper
conductor single core cable in surface /
recessed medium class PVC conduit,
with piano type switch, phenolic
laminated sheet, suitable size M.S. box
and earthing the point with 1.5 sq.mm.
FR PVC insulated copper conductor
single core cable etc as required.
Providing and fixing following capacity
TP&N disconnector fuse switch unit
inside the existing panel board with ISI
marked HRC fuses including drilling
holes in cubicle panel, making
connections, etc. as required. 32 Amp
TP&N
Total
1
10
1
10
Set
Metre
Nos
Metre
4
Nos
1
Nos
24
ESTIMATE FOR RENOVATION WORK OF TAILORING TRAINING ROOM 40'X20'
(12MX6M) AT MTDC, KHADI & V.I.COMMISSION,GANDHI DARSHAN,
RAJGHAT, NEW DELHI
SCOPE OF WORK: DISMENTLING, FILLING, CONCRETING,BRICK WORK,
PLASTRING, FLOOING, FASE CEILLING, ELECTRIFICATION, DOORS AND
WINDOWS ETC.
Sr
No.
1
Item
Code
15.7.4
2
6.4.2
Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V
level in all shapes and sizes in : Cement mortar 1:6
(1 cement : 6 coarse sand)
3
5.3
Reinforced cement concrete work in beams,
suspended floors, roofs having slope up to 15°
landings, balconies, shelves, chajjas, lintels, bands,
plain window sills, staircases and spiral stair cases
up to floor five level, excluding the cost of
centering, shuttering, finishing and reinforcement,
with 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size
4
13.3.1
Description of item
Demolishing brick work manually/ by mechanical
means including stacking of serviceable material
and disposal of unserviceable material within 50
metres lead as per direction of Engineer-incharge.In cement mortar
20 mm cement plaster of mix :1:4 (1 cement: 4
fine sand)
5
13.8
Providing and applying white cement based putty
of average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete.
6
11.41.2
a. Providing and laying vitrified floor tiles Kajariya
make in with water absorption less than 0.08%
and conforming to IS : 15622, of approved make,
in all colours and shades, laid on 20mm thick
cement mortar 1:4 (1 cement : 4 coarse sand),
including grouting the joints with white cement
and matching pigments etc., complete. Size of Tile
600x600 mm
b. Providing and laying rectified Wall tiles in
different sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08% and conforming to IS : 15622, of approved
make, in all colours and shades, laid on 20mm
thick cement mortar 1:4 (1 cement : 4 coarse
sand), including grouting the joints with white
cement and matching pigments etc., complete.
Size of Tile 300x450 mm
7
Total Qty
1
Cu M
2.25
Cu M
0.2025
Cu M
100.8
Sq M
90.72
Sq M
72
Sq M
10.8
Sq M
Rate
Amount
25
8
12.29
Providing and fixing false ceiling with 12 mm thick
plain/ semi perforated or with design ceiling tiles
of BWP type phenol formaldehyde synthetic resin
bonded pressed particle board conforming to
IS:3087, Erolite maker finished with a coat of
aluminium primer on both sides & edges, including
two coats of synthetic enamel paint of approved
quality on exposed face, fixed to a grid made out
of anodised aluminium (with 15 micron anodic
coating) Tsections 35 x15x1.5 mm size main
runners, cross runners 23.5x19x1.5 mm fixed to
main runners placed 600 mm centre to centre
both ways so as to form a grid of 600 mm square.
The frame work shall be suspended from ceiling by
level adjusting hangers of 6 mm dia M.S rod fixed
to roof slab by means of ceiling cleats and dash
fastener. The suspenders shall be placed 600 x
1200 mm centre to centre including fixing to the
frame with C.P brass screws and applying a
priming coat of zinc chromate yellow primer
including necessar cutting.
9
13.3.1
Painting with syntheic Plastic paint, having VOC
(Volatile Organic Compound) content less than
150 grams/ litre, of approved brand and
manufacture, including applying additional coats
wherever required to achieve even shade and
colour Two coats
10
KVIC
72
Sq M
90.72
Sq M
5.76
Sq M
6.5
Sq M
40
Nos
10
Sq M
Providing and fixing allumenium powder coated
fixed /openable window with frame tube of size
4"X1.5" in 16 guage (Jindal make), shutter in 3/4"
in series with locking patty, hinges,stay rod and
locking arrangement etc including clear glass in
shuttters of reputed brand complete.
11
KVIC
Providing and fixing venetian blinds of reputed
make selected colour and design including all
necessary fittings for window.
12
1.8.3
A.)Wiring for light point/ fan point/ exhaust fan
point/ call bell point with 1.5 sq.mm FR PVC
insulated copper conductor single core cable in
surface / recessed medium class PVC conduit, with
piano type Modular switches, phenolic laminated
sheet, suitable size M.S. box and earthing the
point with 1.5 sq.mm. FR PVC insulated copper
conductor single core cable etc as required.
13
KVIC
B) Ditto as per item no.21 above but wiring with
2.5 sq.mm for power ponit
26
14
2.8.6
15
16
1.53
17
2.1.1
18
19
KVIC
app
rate
Supplying and fixing following way prewired TP&N
MCB distribution board of steel sheet for 415 volts
on surface/ recess complete with loose wire box,
terminal connectors for all ncoming and outgoing
circuits, duly prewired with suitable size FR PVC
insulated copper conductor up to terminal blocks,
tinned copper bus bar, neutral link, earth bar, din
bar, detachable gland plate, interconnections,
powder painted including earthing etc. as
required.(But without MCB/ RCCB/ Isolator)
Providing and fixing Ceilling lights with 02 Nos 36
Watts four pin tube and electric chowk.
Supplying and drawing of UTP 4 pair CAT 6 LAN
Cable in the existing surface/ recessed steel/ PVC
conduit as required.
1
Nos
18
Nos
30
Metre
Providing and fixing following capacity TP&N
disconnector fuse switch unit inside the existing
panel board with ISI marked HRC fuses including
drilling holes in cubicle panel, making connections,
etc. as required. 32 Amp TP&N for A.C
2
Nos
Providing and fixing 16 inches wall fans including
necessary fitting of brackets etc of standard make
eg Usha, Khaitan, Orient, Polar (ISI Mark).
8
Nos
10.8
Sq M
Repairing of R.C.C. structure members Viz Column,
beam, and slab by removing loose concrete, rust
from the reinforcement steel by machenical
merans apply polylack EP+ cement slurry 1:1 ratio
as a primer cum bounding coat, preparing of
special polymer mortar as per manufacturer
direction, placing this mortar by hand in layers of
10 mm thick and finished 1:4 cement plaster
inluding shuttering, props, curing etc complete.
Total
27
ESTIMATE FOR RENOVATION WORK OF FACULTY ROOM 20'x20'
(6x6m) AT MTDC, KHADI & V.I.COMMISSION,GANDHI DARSHAN,
RAJGHAT, NEW DELHI
SCOPE OF WORK: DISMENTLING, FILLING, CONCRETING,BRICK WORK, PLASTRING, FLOOING,
FASE CEILLING, ELECTRIFICATION, DOORS AND WINDOWS ETC.
Sr
No.
1
Item
Code
15.7.4
2
5.3
3
13.3.1
4
13.8
5
11.41.2
6
Description of item
Demolishing brick work manually/ by
mechanical means including stacking of
serviceable material and disposal of
unserviceable material within 50 metres lead
as per direction of Engineer-in-charge.In
cement mortar
Reinforced cement concrete work in beams,
suspended floors, roofs having slope up to 15°
landings, balconies, shelves, chajjas, lintels,
bands, plain window sills, staircases and spiral
stair cases up to floor five level, excluding the
cost of centering, shuttering, finishing and
reinforcement, with 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size
20 mm cement plaster of mix :1:4 (1 cement: 4
fine sand)
Providing and applying white cement based
putty of average thickness 1 mm, of approved
brand and manufacturer, over the plastered
wall surface to prepare the surface even and
smooth complete.
A. Providing and laying vitrified floor tiles
Kajariya Make in different sizes (thickness to be
specified by the manufacturer) with water
absorption less than 0.08% and conforming to
IS : 15622, of approved make, in all colours and
shades, laid on 20mm thick cement mortar 1:4
(1 cement : 4 coarse sand), including grouting
the joints with white cement and matching
pigments etc., complete. Size of Tile 600x600
mm
B. Providing and laying rectified Wall tiles in
different sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08% and conforming to IS : 15622, of
approved make, in all colours and shades, laid
on 20mm thick cement mortar 1:4 (1 cement :
4 coarse sand), including grouting the joints
with white cement and matching pigments
etc., complete. Size of Tile 300x450 mm
Total Qty
0.5
Cu M
0.1013
Cu M
54
Sq M
48.6
Sq M
36
Sq M
5.4
Sq M
Rate
Amount
28
7
9.1.2
Providing wood work in frames of doors,
windows, clerestory windows and other
frames, wrought framed and fixed in position
with hold fast lugs or with dash fasteners of
required dia & length (hold fast lugs or dash
fastener shall be paid for separately). Sal wood
8
9.21
Providing and fixing ISI marked flush door
shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board
construction with frame of 1st class hard wood
and well matched commercial 3 ply veneering
with vertical grains or cross bands and face
veneers on both faces of shutters:25 mm thick
(for cupboard) including ISI marked nickel
plated bright finished M.S. piano hinges with
necessary screws including polishing.
9
12.29
Providing and fixing false ceiling with 12 mm
thick plain/ semi perforated or with design
ceiling tiles of BWP type phenol formaldehyde
synthetic resin bonded pressed particle board
conforming to IS:3087, finished with a coat of
aluminium primer on both sides & edges,
including two coats of synthetic enamel paint
of approved quality on exposed face, fixed to a
grid made out of anodised aluminium (with 15
micron anodic coating) Tsections 35 x15x1.5
mm size main runners, cross runners
23.5x19x1.5 mm fixed to main runners placed
600 mm centre to centre both ways so as to
form a grid of 600 mm square. The frame work
shall be suspended from ceiling by level
adjusting hangers of 6 mm dia M.S rod fixed to
roof slab by means of ceiling cleats and dash
fastener. The suspenders shall be placed 600 x
1200 mm centre to centre including fixing to
the frame with C.P brass screws and applying a
priming coat of zinc chromate yellow primer
(aluminium frame work shall be paid
separately).
Painting with plastic paint, having VOC (Volatile
Organic Compound) content less than 150
grams/ litre, of approved brand and
manufacture, including applying additional
coats wherever required to achieve even shade
and colour Two coats
Providing and fixing allumenium powder
coated fixed /openable window with frame
tube of size 4"X1.5" in 16 guage (Jindal make),
shutter in 3/4" in series with locking patty,
hinges,stay rod and locking arrangement etc
including clear glass in shuttters of reputed
brand complete.
Providing and fixing venetian blinds of reputed
make selected colour and design including all
necessary fittings for window.
10
13.3.1
11
KVIC
12
KVIC
Approved
item
0.0506
Cu M
2.52
Sq M
36
Sq M
48.6
Sq M
4.8
Sq M
5.98
Sq M
29
13
9.76
Providing and fixing bright finished brass 100
mm mortice latch and lock with 6 levers and a
pair of lever handles of approved quality with
necessary screws etc. complete.
14
9.82
Providing and fixing bright finished brass
hanging type floor door stopper with necessary
screws, etc. complete.
15
9.84
16
9.97.3
17
1.8.3
18
A.)Wiring for light point/ fan point/ exhaust fan
point/ call bell point with 1.5 sq.mm FR PVC
insulated copper conductor single core cable in
surface / recessed medium class PVC conduit,
with piano type Modular switches, phenolic
laminated sheet, suitable size M.S. box and
earthing the point with 1.5 sq.mm. FR PVC
insulated copper conductor single core cable
etc as required.
KVIC
B) Ditto as per item no.21 above but wiring
with 2.5 sq.mm for power ponit
2.8.6
Supplying and fixing following way prewired
TP&N MCB distribution board of steel sheet for
415 volts on surface/ recess complete with
loose wire box, terminal connectors for all
ncoming and outgoing circuits, duly prewired
with suitable size FR PVC insulated copper
conductor up to terminal blocks, tinned copper
bus bar, neutral link, earth bar, din bar,
detachable gland plate, interconnections,
powder painted including earthing etc. as
required.(But without MCB/ RCCB/ Isolator)
19
20
Providing and fixing aluminium extruded
section body tubular type universal hydraulic
door closer (having brand logo with ISI, IS :
3564, embossed on the body, door weight upto
36 kg to 80 kg and door width from 701 mm to
1000 mm), with double speed adjustment with
necessary accessories and screws etc.
complete.
Providing and fixing aluminium tower bolts, ISI
marked, anodised (anodic coating not less than
grade AC 10 as per IS : 1868 ) transparent or
dyed to required colour or shade, with
necessary screws etc. complete : 200x10 mm
1
Nos
1
Nos
2
Nos
1
Nos
70
Nos
4
Nos
1
Nos
9
Nos
Providing and fixing Ceilling lights with 02 Nos
36 Watts four pin tube and electric chowk.
1.53
Supplying and drawing of UTP 4 pair CAT 6 LAN
Cable in the existing surface/ recessed steel/
PVC conduit as required.
20
Metre
30
21
2.1.1
Providing and fixing following capacity TP&N
disconnector fuse switch unit inside the
existing panel board with ISI marked HRC fuses
including drilling holes in cubicle panel, making
connections, etc. as required. 32 Amp TP&N for
A.C
22
KVIC
23
KVIC
Providing and fixing 16 inches wall fans
including necessary fitting of brackets etc of
standard make eg Usha, Khaitan, Orient, Polar
(ISI Mark).
Repairing of R.C.C. structure members Viz
Column, beam, and slab by removing loose
concrete, rust from the reinforcement steel by
machenical merans apply polylack EP+ cement
slurry 1:1 ratio as a primer cum bounding coat,
preparing of special polymer mortar as per
manufacturer direction, placing this mortar by
hand in layers of 10 mm thick and finished 1:4
cement plaster inluding shuttering, props,
curing etc complete.
Total
1
Nos
4
Nos
14.4
Sq M
31
ESTIMATE FOR RENOVATION WORK OF LECTURE HALLS ROOM
AT MTDC, KHADI & V.I.COMMISSION,GANDHI DARSHAN,
RAJGHAT, NEW DELHI
MEASUREMENT OF WORKS
SCOPE OF WORK: DISMENTLING, FILLING, CONCRETING,BRICK WORK, PLASTRING,
FLOOING, FALSE CEILLING, DOORS AND WINDOWS ETC.
Sr
No.
1
Item
Code
15.7.4
2
6.4.2
3
5.3
4
13.3.1
5
13.8
7
9.1.2
8
9.21
Description of item
Demolishing brick work manually/ by
mechanical means including stacking of
serviceable material and disposal of
unserviceable material within 50 metres
lead as per direction of Engineer-incharge.In cement mortar
Brick work with common burnt clay F.P.S.
(non modular) bricks of class designation 7.5
in superstructure above plinth level up to
floor V level in all shapes and sizes in :
Cement mortar 1:6 (1 cement : 6 coarse
sand)
Reinforced cement concrete work in beams,
suspended floors, roofs having slope up to
15° landings, balconies, shelves, chajjas,
lintels, bands, plain window sills, staircases
and spiral stair cases up to floor five level,
excluding the cost of centering, shuttering,
finishing and reinforcement, with 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size
20 mm cement plaster of mix :1:4 (1
cement: 4 fine sand)
Providing and applying white cement based
putty of average thickness 1 mm, of
approved brand and manufacturer, over the
plastered wall surface to prepare the
surface even and smooth complete.
Providing wood work in frames of doors,
windows, clerestory windows and other
frames, wrought framed and fixed in
position with hold fast lugs or with dash
fasteners of required dia & length (hold fast
lugs or dash fastener shall be paid for
separately). Sal wood
Providing and fixing ISI marked flush door
shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board
construction with frame of 1st class hard
wood and well matched commercial 3 ply
veneering with vertical grains or cross bands
and face veneers on both faces of
shutters:25 mm thick (for cupboard)
including ISI marked nickel plated bright
finished M.S. piano hinges with necessary
screws including polishing.
Total Qty
2
Cu M
4.5
Cu M
0.2025
Cu M
154.8
Sq M
108.36
Sq M
0.1
Cu M
10.08
Sq M
Rate
Amount
32
9
12.29
10
13.3.1
Providing and fixing false ceiling with 12 mm
thick plain/ semi perforated or with design
ceiling tiles of BWP type phenol
formaldehyde synthetic resin bonded
pressed particle board conforming to
IS:3087, Erolite maker finished with a coat
of aluminium primer on both sides & edges,
including two coats of synthetic enamel
paint of approved quality on exposed face,
fixed to a grid made out of anodised
aluminium (with 15 micron anodic coating)
Tsections 35 x15x1.5 mm size main runners,
cross runners 23.5x19x1.5 mm fixed to main
runners placed 600 mm centre to centre
both ways so as to form a grid of 600 mm
square. The frame work shall be suspended
from ceiling by level adjusting hangers of 6
mm dia M.S rod fixed to roof slab by means
of ceiling cleats and dash fastener. The
suspenders shall be placed 600 x 1200 mm
centre to centre including fixing to the
frame with C.P brass screws and applying a
priming coat of zinc chromate yellow primer
including necessar cutting.
Painting with plastic paint, having VOC
(Volatile Organic Compound) content less
than 150 grams/ litre, of approved brand
and manufacture, including applying
additional coats wherever required to
achieve even shade and colour Two coats
Providing and fixing allumenium powder
coated fixed /openable window with frame
tube of size 4"X1.5" in 16 guage (Jindal
make), shutter in 3/4" in series with locking
patty, hinges,stay rod and locking
arrangement etc including clear glass in
shuttters of reputed brand complete.
11
KVIC
12
KVIC
Approved
item
13
9.76
Providing and fixing bright finished brass
100 mm mortice latch and lock with 6 levers
and a pair of lever handles of approved
quality with necessary screws etc. complete.
14
9.82
Providing and fixing bright finished brass
hanging type floor door stopper with
necessary screws, etc. complete.
Providing and fixing venetian blinds of
reputed make selected colour and design
including all necessary fittings for window.
144
Sq M
108.36
Sq M
5.76
Sq M
3.25
Sq M
2
Nos
2
Nos
33
15
9.84
16
9.97.3
17
1.8.3
18
KVIC
B) Ditto as per item no.21 above but wiring
with 2.5 sq.mm for power ponit
19
2.8.6
Supplying and fixing following way prewired
TP&N MCB distribution board of steel sheet
for 415 volts on surface/ recess complete
with loose wire box, terminal connectors for
all ncoming and outgoing circuits, duly
prewired with suitable size FR PVC insulated
copper conductor up to terminal blocks,
tinned copper bus bar, neutral link, earth
bar, din bar, detachable gland plate,
interconnections, powder painted including
earthing etc. as required.(But without MCB/
RCCB/ Isolator)
Providing and fixing Ceilling lights with 02
Nos 36 Watts four pin tube and electric
chowk.
Supplying and drawing of UTP 4 pair CAT 6
LAN Cable in the existing surface/ recessed
steel/ PVC conduit as required.
20
21
1.53
22
2.1.1
23
KVIC
Providing and fixing aluminium extruded
section body tubular type universal
hydraulic door closer (having brand logo
with ISI, IS : 3564, embossed on the body,
door weight upto 36 kg to 80 kg and door
width from 701 mm to 1000 mm), with
double speed adjustment with necessary
accessories and screws etc. complete.
Providing and fixing aluminium tower bolts,
ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868 )
transparent or dyed to required colour or
shade, with necessary screws etc. complete
: 200x10 mm
A.)Wiring for light point/ fan point/ exhaust
fan point/ call bell point with 1.5 sq.mm FR
PVC insulated copper conductor single core
cable in surface / recessed medium class
PVC conduit, with piano type Modular
switches, phenolic laminated sheet, suitable
size M.S. box and earthing the point with 1.5
sq.mm. FR PVC insulated copper conductor
single core cable etc as required.
Providing and fixing following capacity TP&N
disconnector fuse switch unit inside the
existing panel board with ISI marked HRC
fuses including drilling holes in cubicle
panel, making connections, etc. as required.
32 Amp TP&N for A.C
Providing and fixing 16 inches wall fans
including necessary fitting of brackets etc of
standard make eg Usha, Khaitan, Orient,
Polar (ISI Mark).
2
Nos
4
Nos
40
Nos
10
Nos
1
Nos
36
Nos
50
Metre
2
Nos
16
Nos
34
24
KVIC app
rate
Repairing of R.C.C. structure members Viz
Column, beam, and slab by removing loose
concrete, rust from the reinforcement steel
by machenical merans apply polylack EP+
cement slurry 1:1 ratio as a primer cum
bounding coat, preparing of special polymer
mortar as per manufacturer direction,
placing this mortar by hand in layers of 10
mm thick and finished 1:4 cement plaster
inluding shuttering, props, curing etc
complete.
7.2
Sq M
Total
Note: Above quantity is for 2 nos. of lecture hall, please qoute only for 1 no.
lecture hall, quantity will be halved.