ETX-5300A
Version 1.0
ETX-5300A for TS2012 Slide 1
Why We Think ETX-5300A is a Winner
•
•
•
•
•
Highest capacity-to-size ratio in the market
Best mechanisms for network efficiency
Reduce costs by freeing up PE capacity, cutting price per link
Complements RAD’s ecosystem
Warm reception by tier-1 carriers
ETX-5300A for TS2012 Slide 2
ETX-5300A: Ethernet Aggregation +
Pseudowire Gateway
3U
17.3”
14.9”
Chassis:
• 3U Height
• 4 I/O slots – 20 GbE slot
• Redundant main switching
card with 4 x 10 GbE ports
Power Supply:
• Redundant PSU AC/DC
Performance:
• 200 GbE switch fabric
• 100 GbE switching capacity
2 x Main Card, each supporting:
• 4 x 10 GbE XFP (Max of 8)
• 1+1 port or card redundancy
4 x I/O cards, each supporting:
• 20 x 1 GbE SFP/UTP (Max of 80)
• 2 x 10 GbE XFP (Max of 8)
• 4 x Ch. OC3 PWE3 (Max of 16)
Environment:
• 0°C to 55°C
Timing:
• IEEE 1588-2008: M,S & TC
• Sync-E: External & Master
• 1PPS, TOD & 10 MHz for phase
and frequency lock
Architecture:
• E-line; E-Tree; E-LAN
• OAM 802.1ag/Y.1731 per flow
• Port redundancy (APS/LAG)
• Ring G.8032 (2 x 10 GbE,
10 x 1GbE)
ETX-5300A for TS2012 Slide 3
ETX-5300A Front View Description
Redundant
PSU (DC/AC
Clocking Interfaces
Front View Access
Outlet)
Fan
Module
4 x 10GbE XFP
fully redundant
Secondary Main Card
Primary Main Card
Alarm output
connector
20 x 1GbE Opt
SFP I/O card
Air Filter
20 x 1GbE Elec
I/O card
ETX-5300A for TS2012 Slide 4
Application Scenarios
ETX-5300A for TS2012 Slide 5
Access Aggregation
ETX-36
1 GbE
ETX-203AX
1 GbE
ETX-220A
ETX-5300A
10 GbE
10 GbE
PE
IP/MPLS
ETX-2xx
ETX-2xx
1/10 GbE
G.8032
Rings
STM-1
TDM
ETX-5300A
The Need:
• Access Aggregation functionality:
–
–
–
Frees up expensive PE capacity & cut the price per link
Ethernet and TDM in a single access aggregation device
Initiate SLA base services
• Optimized/Resilient Access topology (often replacing
SDH/SONET)
Solution’s Benefits
• A single-source access ecosystem
• Carrier Ethernet suite (MEF compliant to CE 2.0)
–
–
Advanced Traffic Management
Complete Ethernet OAM suite
• Superior OpEx savings
–
–
Only 3U height (ETX-5300A):
Highest capacity-to-size ratio in market
Extremely low power consumption
ETX-5300A for TS2012 Slide 6
Access Aggregation
• The service providers looking to cut the cost of a direct CPE/demark access
connection to PE/router
• Target Customer:
– Service providers
– Alternative carrier
– Wholesale providers
Carriers that expanding their
access & increasing
subscribers
– MSOs
– Tier 1,2
• Solving the Problem:
– reduce Capex by cutting the price per link in the
• Spectrum of Options:
– Adva is the most direct competitor with similar capabilities using FSP-150EGX, we are about of the same
scale like the EGX but much smaller from factor and better power consumption.
– Of course there are other competitors like Ciena that has smaller and bigger devices
ETX-5300A for TS2012 Slide 7
ENNI Application
Subscriber Sites
ETX-2xxA
UNI
UNI
Operator
Network
Service Provider
Network
ENNI
E-Access_A
ETX-2xxA
UNI
Subscriber Sites
ETX-2xxA
ETX-5300A
ETX-2xxA
E-Access_B
ETX-5300A
UNI
UNI
ETX-2xxA
UNI
ETX-2xxA
Hairpinning
The Need:
• Carrier to carrier connectivity
Solution’s Benefits
• Standard Services: Point-2-Point and/or Multi-Point EVC types, single and multiple
CoS per EVC, MEF-26/28 compliance
• Enable Guaranteed SLA between Carriers
• ENNI Protection: 2-link LAG, active/standby, LACP
• “Hairpinning” capability
ETX-5300A for TS2012 Slide 8
Carrier to Carrier Connectivity
Direct Connection Model
Operator
Network
Subscriber Sites
ETX-2xxA
Service Provider Subscriber Sites
Network ETX-2xxA
ENNI
E-Access_A
UNI
ETX-5300A
E-Access_B
UNI
ETX-5300A
UNI
UNI
ETX-2xxA
ETX-2xxA
UNI
UNI
ETX-2xxA
Transit Model
Subscriber
Sites
ETX-2xxA
Operator
Network
E-Access_A
UNI
ETX-2xxA
Subscriber
Sites
Transit
Network
Service Provider
Network ETX-2xxA
ENNI
ETX-5300A
E-Access C
ENNI
ETX-5300A
UNI
E-Access B
ETX-5300A
ETX-2xxA
UNI
ETX-2xxA
UNI
ETX-5300A
UNI
ETX-2xxA
UNI
ETX-2xxA
• ETX-5300A Benefits for ENNI Application
– Services: p2p and mp EVC types, single and multiple CoS per EVC
– Multiple Shaped EVCs in Tunnels
– Scalability: 1 and 10 Gbps PHYs
– ENNI Protection: 2-link LAG, active/standby, LACP
ETX-5300A for TS2012 Slide 9
Carrier to Carrier Connectivity
• Map SLA based services between two independent carriers
• Target Customer:
– Wholesale providers
– Carrier that has direct connection to another carrier
Carrier that provides SLA
based services to remote
subscribers
• Solving the Problem:
– maintain SLA and service characteristics between two carriers
– The device has to be conform to MEF 26/28 which most of the devices today do not support
• Spectrum of Options:
– there are many options to enable carrier to carrier connectivity as far as we know Adva and RAD are the
only vendors that support MEF26 for this purpose
ETX-5300A for TS2012 Slide 10
Mobile Backhaul solution
RAD Access solution for Mobile
1588 & SyncE Timing feeder
GbE
ETX-5300A GM
generates up to
512 x 1588 streams
MME
Router
ETX-5300A
PE
PE
10 GbE
GbE
10 GbE
ETX-205A
ETX-205A
IP/MPLS
ETX-5300A
ETX-205A
G.8032v2
ETX-205A
ETX-205A
ETX-5300A for TS2012 Slide 11
MBH Solution
• MBH super cell site or aggregation device near the AGW/RNC that also
provides 1588 GM
• Target Customer:
– Wholesale providers
– MBO
• Solving the Problem:
– Aggregates TDM & Ethernet into the transport network with timing capabilities, performs
local switching for x2 connection in LTE
• Spectrum of Options:
– Many alternatives and solutions.
– The unique selling point here is the combination of access aggregation, central demarcation
and timing generator in one box.
– That will eliminate the use of 3 box solution
ETX-5300A for TS2012 Slide 12
Central Demarcation
ETX
Mobile
Concentrator
ETX-5300A
10 GbE NTU
ETX
Wholesale
Carrier
ETX
RNC/aGW Router
ETX
ETX
IEEE802.1ag/Y.1731 OAM
The Need:
• Ethernet Central Service Demarcation for Mobile backhauling
• Requirement for Highly-scalable SLA monitoring & assurance
Solutions’ Benefits
• Carrier-grade , fully redundant demarcation point
• High scalability of Ethernet services and OAM sessions
ETX-5300A for TS2012 Slide 13
Advantages of Having ETX-5300A
with ETX-2xx
ETX-205A
ETX-203AM
ETX-5300A
ETX-203AX
ETX-220A
• Easy management integration of ETX-5300A along with ETX-20xA
• Same MIBs as ETX-2xxA
• Same CLI commands
• Fully OAM interoperability between ETX-5300A and ETX-2xxA
• Reduce certification process
• Allows well optimized traffic engineering and network efficiency
• Provides complete timing over packet solution
ETX-5300A for TS2012 Slide 14
Thank You
For Your
Attention
www.rad.com
ETX-5300A for TS2012 Slide 15