Part 2. Price Bid. - State Bank of Hyderabad

advertisement
1
TENDER DOCUMENT
FOR
CIVILWORKS
AT
NALGONDA MAIN BRANCH,
TENDER SCHEDULE.
Part 2. Price Bid.
Last date for submission of Sealed Tender:
Before 1500Hrs on
03.07.2015
Tender to be submitted to:
The Assistant General Manager (P & ES),
Premises Department
STATE BANK OF HYDERABAD,
2nd Floor, Methodist Complex,
ABIDS,
HYDERABAD 500001
040-23387371/250/275
[Type text]
[Type text]
Signature of Agency with Seal
2
CIVIL WORKS AT NALGONDA MAIN BRANCH,
STATE BANK OF HYDERABAD
PREMISES DEPT, 2ND FLOOR,
METHODIST COMPLEX, ABIDS
HYDERABAD-500001
Name of the Contractor to whom issued: ______________________________
Address: _________________________________________________________
_________________________________________________________________
_________________________________________________________________
CONSULTANTS
DEARCH ARCHITECTS PVT. LTD.
6-264/13/1/A50, 4TH FLOOR, HAL RAGHAVENDRA COLONY,
ROAD NO.1, OPP. SBI BANK, JEEDIMETLA,
QUTHBULLAPUR, HYDERABAD – 500067.
Contact: +91 8464997539, 040 65557539.
EMAIL:hyderabad@dearch.net
[Type text]
[Type text]
Signature of Agency with Seal
3
SCHEDULE OF QUANTITIES FOR CIVIL WORKS AT SBH - NALGONDA MAIN BRANCH, A.P.
A.
CIVIL WORKS
SL.
PARTICULARS
1
1.1
BRICK WORK & CONCRETING WORKS
EXCAVATION
Excavation shall be carried out in any material met on the site to the
lines & levels, the contractor shall remove all excavated materials to
spoil heaps on site or transport for use in filling on the site or stack them
for reuse as directed. Excavated material shall not be deposited within
1.5m from the top edge of the excavation. The sides of the excavation
may be cut sloping or shored and strutted to hold the face of earth as
per site requirements and as directed by the Bank/Architect. The
contractor shall provide suitable arrangement to prevent surface water
from any source entering the foundation pits at his own cost. The
contractor shall make all the arrangements for dewatering during
excavation and subsequent works, the accumulated water from any
source(including subsoil water) in the excavated pits/trenches and
keeping the excavated pits/trenches dry for subsequent works. The
contractor shall not undertake any concreting in foundation untill the
excavation pit/trench is approved by the Bank/Architect.
1.2
1.3
QTY
UNIT
640.00
C.F.T.
BACKFILLING
Backfilling of excavation in trenches, foundation and elsewhere shall
consist soil / selected earth from heaps or brought from borrow areas/
stone/gravel or sand. The material shall be free from rubbish, roots,
hard lumps and any other foreign organic material. The compaction of
filling shall be carried out as specified in drawings or as directed. All
operations for structural fill & backfill which will support footings & slabs
shall be conducted in the dry with suitable on site taken from the
excavated stock piles designated for such use.
600.00
C.F.T.
PCC M10
Providing Machine mixing and laying M10 grade plain cement concrete
(PCC) using 20mm nominal size well-graded approved quality
aggregate and river sand as per approved design mix minimum cement
content 220kg/Cum and maximum water cement ratio - 0.60; including
compacting surface, curing establishing approved dewatering system to
keep site dry all time, cleaning, preparing surfaces, junctions, etc,
including shuttering complete to the satisfaction of the Bank/Architect at
all lifts and leads, Below Foundation, raft, Plinth, Grade Slab, Water
Tank, Lift Pit and all other works in Sub Structure and Road, Drain,
Culvert etc,
120.00
C.F.T.
[Type text]
[Type text]
RATE
AMOUNT
Signature of Agency with Seal
4
1.4
RCC M20
Providing and pouring Machine Mix RC Concrete confirming to grade
M20/20 (IS 456) with minimum cement content of 340 kg/M3 as per IS
Specification, including vibration, finishing, curing & roughening to
surfaces wherever required for all structures at any location & all
heightsas directed. Rate to include all Framework-Shuttering, supports
for the same
SL.
PARTICULARS
1.5
HYSD BARS REINFORCEMENT STEEL FE-415
250.00
C.F.T.
QTY
UNIT
1.50
MT
RATE
AMOUNT
Providing, cleaning, straightening, cutting, bending and fixing in position
reinforcement steel of various diameters as per drawing and
specification, at all heights and depths as directed by Bank/Architect.
The rate is inclusive of providing 18 Guage black annealed bindingwire
for tying and fixing of reinforcement and concrete cover blocks of same
grade as that of Concrete. HYSD bars confirming to IS 1786. (Fe 415).
1.6
6" THK BRICK WALL WITH PLASTER
Constructing 6” thk. Brick wall in 1:6 cement mortar. Brick used shall be
of best quality kiln burnt, having sharp edges & giving clear ringing
sound when struck against each other. The rate shall be inclusive of
plastering the walls with ¾” thk. 1:4 cement plaster on both sides. A 4
½” R.C.C. Patti Beam shall run horizontally @ 3’-0” c/c. The rate shall
be inclusive of any scaffolding required, curing etc, complete.
665.00
S.FT
1.7
9" THK BRICK WALL WITH PLASTER
Specification same as xiii - 1 except for a 9“ x 4-1/2” r.c.c. patli shall run
horizontally @ 3’-0” c/c.
1,120.00
S.FT
1.8
GLASS PIECES ON COMPOUND WALL
Providing and Fixing Bottle glass pieces on 9" thk brick wall with
cement mortar layer. The rate shall be inclusive of any scaffolding
required, curing etc, complete.
150.00
R.F.T
1.9
PLASTERING (Additional Plastering / Repaiing, patch up works)
Providing & applying cement sand plaster of 1:4 proportion to existing
brick / RCC walls & ceilings in single coat of avg. ¾” thk. Finished rough
to receive plaster of paris levelling coat. The rate shall include
necessary scaffolding, curing etc. Complete.
400.00
S.FT
5,300.00
S.FT
1.10
a
b
c
d
WATERPROOF TREATMENT ON THE TERRACE
ROOF,BALCONIES,CORRIDORS AND DRIVE BAYS
Chipping and removing the loose dead cement mortar on the slab
properly.
Cleaning the surface with Iron brush and Air blower to remove dust
particles properly
Making coving ( size 3 x 3 inch ) at all corner with cement mortar on the
roof slab properly
Filling all the Structural cracks (if exists) on roof with POLYFLEX WP
flexible material (1200%) injecting into cracks with disposable syringe.
[Type text]
[Type text]
Signature of Agency with Seal
5
e
f
g
SL.
1.11
a.
1.12
1.13
2
a.
Applying Brushbond ( FOSROC company make ) or POLYFLEX WP
( COLOSSUS company make) flexible waterproof coating by fixing Mica
mesh on the roof slab And 1 feet height to side walls ( vertically and
horizontally ) 2 coats properly.
Waterproofing of slabs shall be tested by ponding the surface with
water to a depth of 25mm for 24hours or longer. The waterproofing
shall be considerd satisfactory, if no leaks or damp pacthes show on
the soffit.
the contractorshall guarantee the installation for the period of 10years
for the watertightness and any other defect.
PARTICULARS
WATER PROOFING FOR INTERNAL WALLS
Providing & laying water proofing treatment , by applying cement slurry
mixed with water proofing cement compound like Fosroc/ Equivalent
one consisting of applying (a) first layer of slurry of cement @ 0.488 kg/
sq.m mixed with water proofing cement compound @ 0.253 kg/ Sq.m.
This layer will be allowed to air cure for 4 hours. (b) Second layer of
slurry of cement @0.242 kg/ Sq.m mixed with water proofing cement
compound @ 0.126 kg/ Sq.m. This layer will be allowed to air cure for 4
hours followed with water curing for 48 hours. The rate includes,
preparation of surface, treatment and sealing of all joints, corners,
junctions of pipes and masonry with polymer mixed slurry.etc.
complete.
CIVIL WORKS FOR ELECTRICAL
Providing & making all the works for the smooth execution of electrical
works by breaking walls, cutting partitions, floors etc.
Rate shall include the doing good of all the areas affected with the
required material.
CIVIL WORKS FOR AIR CONDITIONING
Providing & making all the necessary works for the smooth execution of
air-conditioning works by breaking walls, cutting partitions, floors etc.
Rate shall include the doing good of all the areas affected with the
required material.
FLOORING / SKIRTING / CLADDING WORKS
600mm x 600mm type ( approx.) ( laying with approved tile
adhesive)
Providing and fixing VITRIFIED Tiles of approved make, shade and
pattern as shown in the drwng. / as aproved by Bank/ Architect. In CM
1:4 in proper line and level with out spacers for maintaining the grid
lines. Rate shall be inclusive of providing and laying necessary PCC
and Cement Mortar for a thickness of 3" and joint filling compound of
the same shade of the tiles and including pop covering on the new
flooring for the protection of tiles with base covering plastic. Basic rate
of tile is Rs.80/- per Sft
[Type text]
[Type text]
QTY
1,372.00
UNIT
S.FT
1.00
L.S.
1.00
L.S.
4,550.00
S.FT.
RATE
AMOUNT
Signature of Agency with Seal
6
2.1
CERAMIC TILE FLOORING
Providing and fixing 12” x 12” Ceramic Tiles of approved make, quality
& shade and pattern as shown in the drg. In CM 1:4 in proper line and
level. Rate shall be inclusive of providing and laying necessary PCC
and Cement Mortar for a thickness of 3" and joint filling compound of
the same shade of the tiles.
2.2
a.
b.
GRANITE WORKS
GRANITE SLAB TREADS (JET BLACK)
GRANITE SLAB RISERS (JET BLACK)
Providing and fixing 20mm thick granite slab of approved quality (Jet
Black) on step treads with necessary joint filling and backing material.
The edge shall be moulded and machine polished with anti skid Strip.
Rate shall be inclusive of providing 25mm wide antiskid strip on tread
parallel to the length of the tread and bull nosing the edge.
SL.
2.3
a.
PARTICULARS
VITRIFIED TILE SKIRTING
4" HIGH
Providing and laying VITRIFIED TILE skirting / risers of approved shade
and make in CM 1:4 in proper line and level. The skirting should be
flushed with the level of P. O. P. Punning on wall with 1/4" grove. Rate
shall be inclusive of providing and laying necessary backing material
and joint filling compound of the same shade of the tiles.
2.4
2.5
2.6
2.7
1,700.00
S.FT.
225.00
85.00
S.FT.
S.FT.
QTY
UNIT
410.00
R.FT.
GLAZED TILE DADO
Providing and fixing 12" x 8" approved plain shade of Glazed tiles as
per pattern for dado from FFL using CM 1:4 in proper line and level as
directed by the Bank / Architect as shown in the drawings. The rate
shall include necessary backing material,dural nosing for edges, water
proofing and joint filling compound of the same shade as that of the
ceramic tiles. All sanitary fittings shall be located on the joints or
junctions of the tiles. Basic rate of tile is Rs.60/- per Sft
90.00
S.FT.
GRANITE SLAB DADO ON EXTERNAL FAÇADE (BLACK GALAXY)
Providing and fixing 20mm thick granite slab of approved quality &
shade for dado as per approved pattern by Architect and according to
specified sizes . The rate shall include machine polishing the edges
with V Grove, necessary backing material, water proofing and joint
filling compound of the same shade as that of the granite slab.
310.00
S.FT.
20.00
R.FT.
30.00
S.FT.
Note : no granite slab dado quantity shall be taken for skirting and
stripes unless specified.
WASH BASIN COUNTER ( 2'-0" WIDE ) (BLACK GALAXY)
Providing and laying platform of 2’-0” width (clear) and at 2’-8” height
(top) above ffl. Of approved 20mm thick granite with bull nosed edge. It
shall be supported on wall as shown in the drg. Rate shall include the
profile cutting and fixing of below counter wash basin and polishing the
exposed edges of granite. A 2” granite facia shall be provided below the
nosed edge.
URINAL PARTITION IN GRANITE (BLACK GALAXY)
[Type text]
[Type text]
RATE
AMOUNT
Signature of Agency with Seal
7
Providing and laying urinal partition of size (3'-0" x 1'-6" appox) of
approved 20mm thick granite ( DOUBLE SIDE POLISHED) with
champhered and machine polished edge fixed as per the direction of
the architect. It shall be supported on wall as shown in the drg. Rate
shall include the profile cutting, fixing and polishing the exposed edges
of granite.
2.8
POP SHEET FOR VITRIFIED TILES PROTECTION
Providing, Laying & Removing protection over finished tiled surface by
first laying black thick plastic sheet over newspapers, Followed by
laying 12mm thick POP sheet by keeping 6 to 8mm gap in between
them, thereafter filling the gap by suitable POP paste in joints to make
them monolithic. as per the architect instruction.
4,550.00
SFT.
SL.
3
PARTICULARS
ANTI TERMITE TREATMENT.
Applying Anti termite treatment in the preimeses with all necessary
injection process and written gurentee of 3years to be given . The work
to be completed as per design approval of the architect.
QTY
7,000.00
UNIT
SFT.
4
PLUMBING & SANITARY FITTINGS
15mm DIA C.P.V.C. PIPE
Providing & fixing 15mm dia CPVC pipes for distribution in toilets /
pantry including chase cutting, chase filling. The rate shall include all
accessories like tees, unions, elbows, bends etc. required to make the
system operational and complete.
90.00
R.FT.
30.00
RFT
5.00
NOS.
4.1
4.2
a
4.3
RATE
AMOUNT
DRAINAGE
Providing & fixing PVC pipes of supreme/prince make or equivalent in
position of required size with special fittings, traps, bends, ys, floor &
nahani traps etc. Including chemical sealed joints as required at site
making necessary connections with existing lines for w.c. & waste water
lines, chambers to be constructed wherever necessary , unused lines
for w.c. & waste water to be removed, the rate shall include all
incidental work, cutting & making good walls & floors etc. Complete.
Please visit the site for inspection.
4"
SANITARY ITEM
Providing & fixing following fixtures, the rate for the following shall be
inclusive of all necessary fixtures, labour charges accessories &
attachments to make then operational.
b.
JOHNSON MAKE
EWC - (S or P Trap according to site condition) - TOPAZ FLOOR
MOUNTED COUPLED CLOSET (White)
[Type text]
[Type text]
Signature of Agency with Seal
8
d.
m
EWC with out cistern & with seat cover - (S or P Trap according to site
condition) - Pearl (White)
CISTERN - JOHNSON SUPERFLUSH - (White)
URINAL - RUBY HALFSTALL URINAL (White)
WASH BASIN - MAPLE COUTER TOP WASH BASIN (GB 04) (Pastel
Colour)
SS SINK - (Size of 450mm x 300mm). Basic cost of sink Rs. 1500/-
4.4
c.
e.
f.
g.
h.
i.
j.
k.
SL.
l.
m.
FITTINGS - JOHNSON MAKE ISI MARKED
ANGLE COCK (COMFORT)
BOTTLE TRAP (PREMIUM)& WASTE COUPLING (FULL THREADED)
1/2" FLEXIBLE PIPE
PVC NAHANI TRAP WITH COVER
JET SPRAY - WITH FLEX TUBE / HOOK- HEALTH FAUCET
TOILET PAPER HOLDER - (ALTO)
COAT HOOK (ALTO)
TOWEL RING (ALTO)
PARTICULARS
TOWEL ROD (ALTO)
FLUSH VALVE FOR URINAL
f.
h.
i.
n.
STOP COCK
4.5
ACCESSORIES
5.00
NOS.
5.00
5.00
4.00
NOS.
NOS.
NOS.
1.00
NOS
9.00
4.00
4.00
10.00
5.00
5.00
5.00
2.00
QTY
6.00
5.00
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
UNIT
NOS.
NOS.
9.00
NOS.
a
SOAP DISPENSER - approved make
4.00
NOS.
b.
S.STEEL TOILET SIGNAGES ( 4" x 4")
2.00
NOS.
5
STEEL FABRICATION WORKS
M.S.GRILLS (WINDOWS)
900.00
S.FT
40.00
R.F.T
a
RATE
AMOUNT
Providing and fixing MS Grills for windows / ventilators etc. using 12mm
M. S. round or square bar grills at 4" C/C fixed as per the architects
design. The edges to be fixed with 12x5mm MS flat. The rate shall be
inclusive of all fittings etc. complete and with 2 coats of anti rust paint.
b.
ST.STEEL RAILING (BUFF FINISH)
c
SS RAILING FOR STAIRCASE WITH SUPPORTS ON EACH STEP
Providing and fixing st.steel railing ( height of 600mm) OF GRADE 304,
GAUGE 16 using pipe section 76mm dia for top railing and vertical
supports at ends and with 20mm dia SS pipes fixed to alternate tread
using base plate of thickness 8 mm( balustrades), and 2 Nos
horizontals of 12mm dia for interconnecting the vertical supports fixed
as directed by Bank / Architect with necessary fixtures fittings, collors,
rings strips etc. complete. All ends to be provided with SS end caps.
6
ALUMINIUM FABRICATION WORKS
ALUMINIUM SLIDING WINDOWS
[Type text]
[Type text]
Signature of Agency with Seal
9
a.
WITH POWDER COATED SECTIONS
900.00
S.FT.
Providing and fixing aluminium sliding powder coated / anodized
window. The Frame should be 2" x 1 1/2" wide sections with tracks on
all the sides & drain tray system for the bottom frame. The shutters
should be of suitable 2" x 1" sections for top & bottom member & 1 5/8"
x 1" for vertical with 6 mm. Thk. approved make clear float glass and
beading shall be used. The tracks will be fixed on 2" x 1" aluminium
BOX frame. - (Heavy Duty 2" thick frames(14 guage) - approved make)
SL.
7
7.2
Note : rate shall be inclusive of necessary fittings, locks, handles, best
quality rollers, necessary hardware items, etc.
PARTICULARS
QTY
UNIT
RATE
AMOUNT
RATE
AMOUNT
PAINTING
LUSTRE
12,000.00
S.FT.
Providing & applying Luster Paint on walls, columns & ceilings. The rate
shall include scrapping, levelling & preparing the surface. Primer coat +
(minimum) 3 coats to get evenly spread quality finish (roller finish) of
approved make, quality & shade shall be provided.
SL.
PARTICULARS
QTY
UNIT
7.4
ENAMEL PAINT
1,310.00
S.FT.
200.00
S.FT.
Providing & applying 1st quality oil paint of approved make, quality &
shade. The rate shall include scrapping, levelling & preparing the
surface with primer quote.
7.5
TEXTURED FINISH
7.6
Providing & applying a coat of textured finish on walls and columns.
The rate shall include scrapping, levelling & preparing the surface.
Primer coat + (minimum) 3 coats of approved make, quality & shade
shall be provided.
EXTERIOR EMULSION PAINT - UP to 10 feet Height
a.
UP TO 10 FEET HEIGHT
5,000.00
S.FT.
b.
ABOVE 10 FEET HEIGHT & SCAFFOLDING IS REQUIRED
2,750.00
S.FT.
8.1
DISMANTLING & DEMOLITION
Dismantling 6”/9" thk, brick wall carefully by using chisel to cut &
making good wall edges with 1:4 cement plaster including removal of
debris from site.
625.00
S.F.T.
8.2
Dismantling and removing doors wherever required in a manner which
facilitates easy fixing of new doors and windows without undue
expense. the rate shall include removal of debris from site.
16.00
NOS.
8.3
Dismantling and removing windows wherever required in a manner
which facilitates easy fixing of new windows without undue expense.
the rate shall include removal of debris from site.
864.00
S.F.T.
Providing & applying exterior grade emulsion paint of approved quality,
make & shade, after scrapping the surface with wire brush & then
applying (minimum) 3 coats of paint as directed by Bank / Architects.
8
[Type text]
[Type text]
Signature of Agency with Seal
10
8.5
Dismantling marble, granite, kota, marble mosaic, ceramic tile flooring &
dado including skirting and excavation up to 6” in plinth wherever
required, etc. In a manner which facilitates laying of new flooring
without undue extra expense. The rate shall include removal of debris
from site.
Dismantling average 6” high brick bat coba in roof / surki in Toilets in a
manner which facilitates easy laying of new flooring with undue extra
expense. The rate shall include removal of debris from site.
8.6
Dismantling existing wall panelling, wooden partitions with door, ms grill
partition with door and false celing with frame work . The rate shall
include removal of debris from site.
8.4
8.70
8.8
Dismantling existing counter tables along with side & back units and
shifting it to the said location in or out of premises
Dismantling existing 4' ht SS or MS Railing. The rate shall include
removal of debris from site.
TOTAL
2,400.00
S.F.T.
125.00
S.F.T.
2,625.00
S.F.T.
22.00
NOS.
40.00
R.F.T
Signature of Agency with Seal
[Type text]
[Type text]
Signature of Agency with Seal
Download