Syllabus of semester system
for the trade Of
SURVEYOR
UNDER
CRAFTSMEN TRAINING SCHEME( CTS)
(Four Semesters)
Designed in – 2012
By
Government of India
Ministry of Labour & Employment (DGE&T)
CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE
EN-81,Sector -V, Salt Lake,
Kolkata – 700 091
List of the trade committee members approved the syllabus of Semester System for the trade of
“Surveyor” under Craftsmen Training Scheme (CTS) held on 17-10-2011,at Advanced Training
Institute Kolkata.
Shri S.J.Amalan, Director, C.S.T.A.R.I, kolkata
Sl.No
1.
Name & Designation
S/Shri/Smt
N. K. Chatterjee,Director
Organisation
A.T.I.Kolkata
Chairman
2.
J. Ukil. Jt.Director
A.T.I.Kolkata
Member
3.
G. C. Saha,ADT
A.T.I.Kolkata
Member
4.
Prasanta Kumar Paul,JE
CPWD,Kolkata
Member
5.
A. K. Kolay,Asst.Engg.
CPWD,Kolkata
Member
6.
Saikat Dutta
Project Manager, M/s Unit Construction
Co.(P) Ltd. Kolkata
Member
7.
A. K. Dutta,ADT
A.T.I.Kolkata
Member
8.
A. K. Mondal,ADT
A.T.I.Kolkata
Member
9.
Sk. A. Hossain, T.O
A.T.I.Kolkata
Member
10. Soma Das,V.I
R.V.T.I.(W),Kolkata
Member
11. Manika Banerjee,
Don Bosco,SERI
Member
12. Abhijit kr.Porel
Representation of Govt. of W.B
Member
13. Debasis Hari,D/M(Civil)
Representation of Govt. of W.B
Member
14. P.K.Madavi,
CTI,Chennai
Member
15. Pradip Kumar Sarkar,Ins.
Representation of Govt. of W.B
Member
16. Somnath Adhikari
Consulting Engineer
Member
17. Goutam Nandi,
CSTARI,Kolkata
Member
18. Tapan Kumar Halder, T.O.
ATI,Kolkata
Member
19. S.Rana, V.I
ATI, Kolkata
Member
20. Subrata Saha
Representation of Govt. of W.B
Member
Remarks
GENERAL INFORMATION
: Surveyor
1. Name of the Trade
2.
N. C. O. code No
:
3. Duration of Craftsman Training
: Two years. (Four semesters having duration
of six months each).
: Passed 10th class with math. & science.
4. Entry Qualification
5. Unit Strength
6. Space Norms
: 20
: Workshop:100 sq. meter.
7. Power Norms
: 5 kW.
8. Instructors Qualification:
Degree in Civil or Architecture engineering with one
year post qualification experience
Or,
Diploma in Civil or Architecture engineering with 2
years post qualification experience
Or,
NTC/NAC passed in same or relevant trade with 3
years post qualification experience.
Desirable Qualification: Preference will be given to
a candidate with CITS in same or relevant trade.. (If
not done CITS than must be trained within 02yrs on
joining)
SYLLABUS FOR THE TRADE OF SURVEYOR
UNDER CRAFTSMENSHIP TRAINING SCHEME (CTS) Based on Semester System
SEMESTER -I
Week
Trade practical
no
1.
Familiarization with the
INSTITUTE. Importance
of trade training.
Instruments used in the
trade. Types of work
done by the trainees in
the trade. Types of jobs
made by the trainees in
the trade. Introduction
to safety including fire
fighting equipment and
their uses etc.
Free hand sketching of
simple geometrical
object. Use of drawing
instruments and
materials. Lay out of
drawing sheets.
Drawing conventional
lines according to IS
code. Folding of sheets.
Trade theory
Vocational science &
Calculation
Occupational Safety &
Health
Basic safety introduction, -------------Personal protection:Basic injury prevention,
Basic first aid, Hazard
identification and
avoidance, safety signs
for Danger, Warning,
caution & personal
safety message.
Importance of safety and
general precautions
observed in the institute
and in the section.
Importance of the trade
in the development of
Industrial economy of
the country. What is
related instruction –
subjects to be taught,
achievement to be
made. Recreational
medical facilities and
other extracurricular
activities of the Institute.
(All necessary guidance
to be provided to the ne
comes to become
familiar, with the
working of Industrial
Training Institute.
System including store
procedures, professional
prospects etc.
Drawing office
organisation. Drawing
instruments, equipments
materials their use, care
& maintenance, safety
precautions.
Introduction to IS code
of practice and
architectural drawings.
2 & 3 Lettering-basics, vertical Importance of lettering,
and inclined, forms and writing of letters and
proportions. Types of
figures sizes, proportion,
Lettering-strokes,
etc. as per IS code.
composition, fonts
(Gothic, Roman, etc.),
Geometrical drawingwriting sentence.
definition, construction
Construction of plain
of plain geometrical
geometrical figures
figures.
(lines, angles, triangles, Method of construction
rhombus,
of spiral and helix.
quadrilaterals,
polygons, ellipses,
parabola, hyperbola,
etc.)
4.
Scales - plain, diagonal
Principles,
and comparative.
representation and
Use and applications of construction of different
different types of lines
types of scales, graphic
and conventional sign & scales, recommended
symbols.
scales for drawing with
reference to IS codes.
Choice of scales.
Types of lines and
different conventional
representation as per IS.
5, 6 & Drawing plan, elevation Definition and types of
7
of points, lines,
projections.
surfaces, solids,
Methods of projection as
Dimensioning
per IS.
techniques.
Projection of points,
lines, planes and solids.
Sections of solid and
their true shapes.
8 & 9 Isometric projection of
Principle of Isometric &
different objects,
Axonometric projection,
combination of objects
difference between
including furniture, etc. Isometric drawing &
Conversion of
Isometric projection,
Orthographic projection Isometric scale,
Addition, substraction of
decimal fraction.
Multiplication and division of
decimal and fraction.
Conversion of decimal into
vulgar fraction and vice versa.
Fundamental algebraic
formula for multiplication.
Fundamental algebraic
formula for multiplication.
10 &
11
12
13 to
15
16 to
18
to Isometric projection
and vice-versa.
Reducing and
enlargement of drawing
objects by graphical
method and by
instrument and
measured drawing of
any object.
Perspective projection
– drawing of parallel or
one point perspective
projection of room with
furniture in it.
Determining vanishing
points, change in
perspective by changing
vanishing points.
One point and two
point perspective
projection of a building.
dimensioning an
Isometric drawing.
Reducing and
enlargement technique
by graphically and by
instrument.
Perspective projection –
definition of picture
plane, station point,
horizontal line, vanishing
point, cone of vision,
central visual ray,
spectator, eye level
focus, fundamentals diminution,
foreshortening,
convergence.
Method of drawing of
two point perspective.
Comparative study of
perspective by changing
the position of spectator,
vanishing point.
Distortion, limits of
exactness, limitation of
field of vision.
Showing arrangement
Building materials:
of bricks in differing
Clay products like Bricks,
parts of bonds, in walls, tiles, terracotta,
pillars coping drawing of earthenware; stoneware,
shoring.
stone, cement, lime,
surki, sand, timber, glass,
paints, texture etc.
INTRODUCTION
Sequence of
construction of a
building. Names of
different parts of
building. Bricks masonry
– principles of
construction of bonds
.Tools and equipment
used. Scaffolding.
Drawing of scaffolding.
Stone masonry, terms
Drawing details of brick used, principles of
Simple and simultaneous
equations.
Simple theory of indices,
simple and simultaneous
equations.
Surds, simple and
simultaneous equation of the
first degree.
Quadratic equations and its
applications.
and stone masonry
including joints.
19 to
22
Drawing different types
of foundation, footing,
piles, grillages,
foundation raft & well
foundation.
23
Drawing details of damp
proof courses and plinth
protection.
24 &
25
Drawing of conventional
signs used in
engineering survey,
cadastral survey.
Topography and
building drawing.
Practice in unfolding
and folding chain, errors
& adjustment of chains,
alignment of chain /
error chaining lines –
measurements of
distance between given
points and their entry in
field book.
Practice in chaining and
taking off-set, use of
optical square and cross
staff setting out right
angles – booking of
construction,
classification, composite
masonry and strength of
walls. Timber: Structure
Indian timber uses
Foundation:-purpose,
causes of failure of
foundation, bearing
capacity of soils, dead
load, live load, wind load
and seismic load.
Examination of ground.
Types of foundation
.Drawing of footing
foundation, setting out
of building on ground
excavation, shoring &
simple machine
foundations.
Damp proof course,
Sources and effects of
dampness,
method of prevention of
dampness in building,
periodic repair and care
for prevention.
Anti-termite treatment.
Surveying – their
classifications, plane
survey, geodetic survey,
purpose of survey –
instruments used in
survey. Nature of
surveyors work –
importance of system.
Common terms and
definitions used in
surveying conventional
signs used in
Field book and survey
maps. Linear measuring
instrument used by
surveyors, their
descriptions and uses.
Types of chain and chain
survey, compass survey,
plane table survey and
Linear graph. Use of common
logarithms tables.
Linear graph. Use of common
logarithms tables.
Properties of plain
geometrical figures –
triangles, rectangle and
quadrilaterals.
26
measurements testing
levelling.
of chain, tape, optical
square and cross staff.
Revision and Final Examination
List of tools & Equipment For a batch of 20 Trainees
TRADE : SURVEYOR
Si. no
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Description
TRAINEE’S KIT
Box drawing instrument containing one 15 cm compass with
pin point, pin point & lengthening bar, one pair spring bows,
rotating compass with interchangeable ink and pencil points,
drawing pens with plain point & cross point, screw driver and
box of leads.
Protractor celluloid 15 cm semi- circular.
Scale card board- metric set of eight A to H in a box 1: 1, 1:2,
1:2:5, 1: 5, 1:10, 1:20, 1:50, 1:100,1:200, 1:500, 1:1000,
1:2000,1:1250, 1:6000, 1:38 1/3, 1:66 2/3
Scale –Metric and section wooden 30 cm long marked with
eight scales -1:1, 1:2, 1:2:5, 1:10, 1:20, 1:50, 1:100, 1:5.
Scales plotting box wood 6 metric scales 30 cms long with
offset scales.
Set square transparent 2 mm thick with bevelled edges 45
degree 20 cm.
Set square celluloid 2mm thick with bevelled edges 60
degrees25cm.
Board drawing 1250 mm*900mm
Square T 1250mm/Mini drafter
Erasing shield small size.
Template –Architects and builders
Quantity
20 sets
20 sets
20 sets
20 sets
20 sets
20sets
20 sets
20 sets
20sets
20 sets
20 setsq
General Outfit
SL. NO.
DESCRIPTION OF TOOLS / EQUIPMENT
QUANTITY
1
Geometrical Models (wooden) as per given below :i) Cube 08 cm sides.
ii) Rectangular parallel piped 8cm*15cm
iii) Sphere 8cm dia.
2
2
2
iv). Light circular core 8 cm dia base and 15 cm vertical height
v) Square pyramid 8cm side base and 15 cm vertical height
vi) Cylinder 8 cm dia. 15 cm height.
vii). Prisms triangular 8 cm sides triangle and 15 cm length.
(To be made by institute)
2
2
2
2
4 nos.
8 nos.
1 nos.
25
26
27
28
29
30
31
French curves transparent plastic set of 12
Flexible curves 80 cm long
Elliptic trammel with ink and pencil for not less than 10 cm minor axis
complete in a case.
Radius curve metric 3 mm to 15 mm
Clinograph wooden 18 cm
Drafting machine Vertical type complete with drawing board adjustable
table and pair of metric scales 30 cm and 40cm long.
Drafting Machine Horizontal type complete with drawing board size
adjustable table with pair or metric scales 30 cms and 40 cms.
Brass parallel rulers in a case.
Calculator Scientific
Planimeter sliding bar pattern 70 cm complete
In case with magnifier and instructions reading in metric units.
Pentagraph brass complete in wooden case with accessories 60 cms.
Beam compass with fine adjustments with ink and pencil points and two
chromium plated weights 30 cm in wooden case.
Proportional dividers 15 cm
Leroy printing set.
Tracing table with plate glass 1250*900cms.
Printing frame 45 cm *60 cm & 80 cm*60 cm
Weighting triangle with tape 1250*900cms
Ammonia box 120 cm *35*35 cms.
Stencils complete set 6 H.
Table drafting for boards.
Stools draughtsman high
Table working blue printing 2m*10m
pc- latest version – for CAD
a)plotter
b) Printer (Desk jet/ Leaser jet)
Almirah steels (Major)
Interlock, interchangeable brass stencils with brush in a box.
pastle and mortar- Porcelain 3 mm, 6mm, 12mm, 18mm
Print Trimmer cutting edge 100cm
Chest of drawers 8 drawers (standard)
Draughtsman table.
Draughtsman stool
32
33
Instructor’s table (big size full secretariat)
Instructor chair.
1 nos.
2 nos.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
4 nos.
1 nos.
4 nos.
4 nos.
4 nos.
4 nos.
1 nos.
1 nos.
2 nos.
4 nos.
2 nos.
1 nos.
1 nos.
2 nos.
1 nos.
2 sets
2 sets
2 sets
2 sets
5 nos.
1 nos.
1 nos.
2 nos.
4 nos.
2 nos.
1 nos.
4 nos.
20 nos.
20 nos.
34
35
36
37
38
39
Architect Desk top (latest)
Server
UPS 5KV
Computer table
Chair.
Furniture for server, printer plotter
5nos.
1 nos.
2nos.
5 nos.
10 nos.
1 no each
SYLLABUS FOR THE TRADE OF SURVEYOR
UNDER CRAFTSMENSHIP TRAINING SCHEME(CTS) Based on Semester System
SEMESTER -II
Week No.
1 to 4
Trade Practical
Trade Theory
Chain survey of small plots by
triangulations, booking and
plotting the same.
Chain survey of built up plots,
locating details, booking and
plotting the same.
Practice in setting up a compass
and checking its accuracy –
taking bearings and calculating
angles.
Field book types- methods of
entry of check lines – its
importance.
Locations of details – types of
off-sets and their limit- town
survey traversing with chain
procedure in plotting chain lines
skeleton, its check and filling in
details.
Technical terms used in
compass survey , difference
between angles and bearingsmagnetic and true meridians
declination and its variation ,
local attraction , its detection ,
and elimination.
Setting up of plane table
levelling, centering and
orientation.
Surveying an area with plane
table by radiation and
intersection methods.
5&6
7, 8 & 9
Surveying of a building site
with chain entering field book
& plotting calculating the area
of site.(practice should also be
given on exiting building from
measurement and producing
drawings from these
dimensions taken).prismatic
compass & its use.
Handling of levelling
Plane table survey advantage &
disadvantages of plane table
surveying general instruction
for Plate Table survey
Methods of Plate tabling –
Radiation –Intersection
Traversing Resection.
Two point and three point
problems triangle of error and
its elimination – Lehman’s rule
–mechanical and graphical
method.
Instruments employed, use, care
& maintenance. Field problems.
Field book plotting.
Introduction to plane table in
surveying. Instruments
employed, use, care&
maintenance. prismatic
compass.
Instruments and accessories-
Vocational science &
Calculation
Properties of regular polygons,
circles parallelogram, parabola
and ellipse.
Determination of sides, area of
triangle, quadrilateral & polygons.
-do-
Determination of area of circles,
instrument. Differential
levelling. Surveying of a
building site with chain & level
with a view to computing earth
work. Setting out level plotting
of longitudinal cross- sections
of a proposed road from given
reduced levels marking, suitable
formation levels & calculation
of earth work. Plotting of block
& block levelling and drawing
of contours.
their uses and description level
book. Differential; levelling
application of chain and
levelling to building
construction. Plotting,
preparation of contour
computing earth work by spot
level and contours. Setting out
work.
sectors, segments and ellipse,
simpson’s rule.
10 to 12
Cross-sections showing the
different types of roads.
Drawing typical cross-section
of railway tracks embankment,
layout plans of railway
platforms, marshalling yards
siding, loop lines. Signalling
points & crossing.
Electric railway tracks.
Road: Introduction to roads,
general principles of alignment.
Classification and construction
of different types of roads.
Indian railways –their gauges,
construction of permanent
ways. Different rail sections.
Use of stone ballast in railway
track. Use and types of sleepers.
Surface area and volumes of
rectangular parallelopoids,
cylinders, pyramids and spheres.
Units of force and weight.
Equation of motion.
13
Preparing drawing of a masonry
culvert and take out various
quantities of items of work &
prepare abstract of cost.
Preparing drawing of an arched
bridge.
Bridge:-introduction to bridge,
component parts of bridge.
classification of culverts(IRC)
Bridges-types, location of a
bridge, tunnels.
Magnet and magnetism. Laws of
magnetic attraction and repulsion.
14,15 & 16
Drawing of different types of
irrigation structures –viz. dams
barrages, weir etc. with the help
of given sketch & data.
Longitudinal section of
distributaries.
1. INTRODUCTON OF
Magnetic substance – permanent
WATER RESOURCES
magnet.
ENGINEERING.
Different terms used in
irrigation.
2.Hydrology like duty, delta,
base period, intensity of
irrigation, hydrograph , peak
flow, run off, catchment area,
CCA, corps like, rabi, kharif
etc.
3. Storage/ diversion head work
definition: types of dam –
masonry, concrete, arc and
buttress dams, earth.
(a)Reservoir –types of
reservoirs viz . Single purpose
and multipurpose, area, capacity
of reservoir.
B) CANALS:-canals,
classification of canals and
distribution system, canal
structures via head regulators,
escape, etc. Drawing of canal
alignment including
longitudinal and cross section of
canals with the given data.
Types of cross drainage works
viz. aqueducts, siphon aqueduct,
super passage, level crossing in
irrigation.
17 to 19
Introduction –terms used in
public health engineering.
System of sanitation house
plumbing, sanitary fittings etc.
types of supply system and
purification of water.
20 & 21
22
23
Public Health & sanitation.
Preparation of drawings
showing various pipe joints for
underground drainage, method
of sanitary fittings in multi
storied building. Manholes and
septic tank. Water supply
system.
Drawing details of RCC
members. Rectangular beams,
lintel chajjas, slab, stair
including column with footing
& continuous columns showing
disposition of reinforcement.
Introduction to RCC uses
materials proportions and form
work, including bending of bars
and construction reference to IS
code. Reinforced brickwork.
Material used for RCC, methods
of concreting, construction
selection of materials course
aggregate cement –water,
reinforcement, characteristics.
Methods of mixing concretehand and machine, slump test,
Magnetic field and line of force
water cement ratio.
proportions of magnetic lines of
force.
Flooring:
Different types of floors,
Magnetism and its natural ore.
materials used in floor and
construction process.
Kinds of magnet and system of
magnetization. Revision on
Forms of riveted head, types of magnetism. Trigonometrically
riveted joints
ratios and functions of multiple
and connection, failure of
angles functions of sub-multiple
riveted joints.
angle and compound angles radian
measurement and relation between
system of measurement of angles
Introduction to structural
– formula connecting sides, angles
drafting. Arrangements of
and areas of triangles.
drawing, standard drawing.
24 & 25
Method of floor and finishing.
Drawing forms of rivet heads
and types of riveted joints.
Drawing of different types of
steel roof trusses, stanchion etc.
26
Revision and final exam.
LIST OF TOOLS & EQUIPMENTS FOR 20 TRAINEES
TRADE : SURVEYOR (FOR 2ND SEMESTER)
Same as Semester – I and additional list of tools & equipments are appended below:
SURVEY INSTRUMENTS
SL NO.
1.
2
3
4.
5.
6.
7.
NAME OF TOOLS /EQUIPMENT
Land measuring chain 30 metres with 10 arrows.
Metallic tape 30 metres.
Steel tape 20 metres long in leather case.
Ranging rods wooden fitted with iron shoe 3 metre.
Optical square P.W.D pattern.
Optical square box type circular
Dumpy level –builder 25 cm focal length x 23 mm completes with box and
QUANTITY
5 Sets.
4 nos.
2 nos.
15 nos.
5 nos.
4 nos.
4 Sets.
8
9
10
11
12
13
14
15
accessories and stand.
Auto Level
Digital Level along with bar coded staff
Levelling staff 4 metres reading to 5 mm telescopic type
Plane table with stand and wing nut
Alided
Telescopic alided
Trough Compass
‘U’ frame with plumb bob
1 nos.
1 nos.
4 nos.
4 nos.
4 nos.
2 nos.
4 nos.
4 nos.
SYLLABUS FOR THE TRADE OF SURVEYOR
UNDER CRAFTSMENSHIP TRAINING SCHEME (CTS) BASED ON SEMESTER
SYSTEM
SEMESTER –III
Week
No.
1&2
Practical
Theory
Traversing with plane
table of built up areas.
Running and open
traverse with plane table
and fixing details.
Inking finishing,
colouring and tracing of
plane table maps done
in previous weeks
Errors in plane tabling their
elimination instruments
used in combination with
plane tabling their
construction and use.
Telescopic alidade.
Vocational science &
Calculation
Solutions of simple
triangles.
3
4&5
6&7
8&9
Demonstration of
permanent adjustment
of level.
Performing permanent
adjustment to various
type s of leveling
instruments.
Permanent adjustment of
various leveling instruments
repeating the same with
precautions.
Working out problems on
field book reduction,
reciprocal levelling and
permanent adjustments.
Road project –
Types of surveys for the
reconnaissance,
location of road points to
preliminary and final
be considered during
location survey including reconnaissance, preliminary
preparation of route
and final location surveys.
map to scale taking
Alignment of roads relative
profiled and section with importance of length of
level plotting, marking
road height of embankment
formation levels –
and depth of cutting road
calculation of earth work gradients sub grades and
and other materials for
road foundations, drainage
laving road including
camber curves 1
estimation of earth
And super elevation road
work.
surfaces such as earth road.
Water bound macadam
cement contrete payment.
Practice in setting up a
Introduction to theodolite.
theodolite and taking
Temporary adjustment of
readings.
theodolite-procedure in
Measurement of
setting up-method of
horizontal angles by
measurement of horizontal
repetition, reiteration
angles- repetition and
methods-method of
reiteration method.
entering the same in the General forms of field notes
field book- setting out
used in theodolite surveysgiven angles.
adjustment of errors while
Practice in measuring
laying a given angle by
vertical angles. Setting
repetition. Method of
out given vertical angles setting out straight lines
and entering in the field establishing lines at given
book.
angles with given lines.
Instrumental error andelimination-permanent
adjustment of theodolite
care and maintenance of
theodolites.
Setting out a straight
Method of plotting
line over and across
traverses-gales traverse
obstacles prolonging
system checking of
Problems of height and
distance.
Use of mathematical tables.
Revision of trigonometry.
Surface area and volumes
of cylinders.
Surface area and volumes
10
11
12
13
14
15
16 &
17
straight lines
establishing lines at
given angles with given
lines- setting out an
around given rectilinear
figures.
Running a closed
traverse over a given
area. Booking calculating
the coordinates and
plotting the traverse.
Practice in performing in
permanent adjustment
of theodolite.
Finding height and
distance of accessible
and inaccessible objects
with theodolite and
chain and calculating the
same, use of box
sextant.
Contouring by spot level
method including
interpolation.
measurements of closed
and open traverse-use of
traverse table (chamber
and boilean) closing error
and its adjustment.
of prisms. Prisomoidal
formula.
Omitted measurements and Surface area and volumes
their calculation-practice in of pyramids. Prisomoidal
working out problems.
formula.
Method of calculating area
of a closed traversed from
co-ordinates.
Working out problems on
finding out areas of closed
traverse, height and
distances – box sextant, its
descriptions and use.
Abney’s level and its
descriptions.
Topographic survey and
principles –instrument and
accessories used in
topographic survey –
contour and characteristics.
Contouring by cross –
Vertical intervals horizontal
section method
equivalents method of
including interpolation
determining contours –
of contours (grid
comparisons of different
method).
methods and their
applications.
Direct contouring using
Interpolations of contours
levels for vertical
by different methods and
control, plane table and preparing contour map –
telescopic alidade for
preparation of field’s record
horizontal control.
for topographic surveys –
height book- height tracing
and colour trace.
Conducting topographic Different method of finding
survey of undulated area area of irregular figuresby theodolite
planimeter – its principle,
triangulation and plane
construction, use of
table resection and
precaution – working out
intersection method
problems of areas by using
using Indian pattern
planimeter enlarging and
Surface area and volumes
of sphere.
Surface area and volumes
of cone.
Revision of whole
mensuration work.
Elementary theory of light.
-do-
clinometers.
reducing of plans use of
proportions, compass and
pantographs and their use .
Irrigations:-Types of supply
of water- rain fall
attachment areas, run off
over best side for
construction a reservoirs,
water spread area factors
affronting the consideration
of the height of dams and
capacity of reservoirs.
18
Carrying out
topographical survey
with help of theodolite
levels and tape of a site
of reservoir crosssectional drawing of
different canals.
19 &
21
Survey camps:In any suitable hilly place 3 week, carrying out contour
direct and indirect contour survey of a small area by
tachometer working out proposed alignments on
contour maps ( project work ) on various curves and
calculation , marking of alignment of road on it. Direct
contour and indirect contour.
Setting out of simple
Working problems on
curves by chain and tape simple curves by chain and
with different methods
tape offset method and
setting out of curves by
successive by section of
deflections methods
arch.
with and without
Compound curves working
obstacles.
problems on compound
Setting out of compound curves and types of
curves, transition curve
transition curves.
with theodolite.
Setting out of vertical
Different type of verticals
curves.
curves and its working
Reducing and enlarging
problems. Parts of
the plan by pentagraph
pentagraph and planimeter
and area of planimeter. with their uses.
Revision and Final Trade Test
22 &
23
24 &
25
26
Laws of reflection,
refraction mirrors and lens..
properties of mirrors and
lenses, acromatic
combination of lenses,
description and use of
optical instruments such as
telescopic sextants etc.
-do-
Properties of mirrors and
lenses, acromatic
combination of lenses,
description and use of
optical instruments such as
telescope sextants etc.
Some common terms from
astronomy essential for
surveyor.
LIST OF TOOLS & EQUIPMENTS FOR 20 TRAINEES
TRADE : SURVEYOR (FOR 3RD SEMESTER)
:
Same as Semester – I and additional list of tools & equipments are appended below:
GENERAL OUT FIT
SI
No.
1.
2.
3.
4.
5.
Name of tools/equipment
Quantity
Planimeter sliding bar pattern 70 cm complete in case with
magnifier and instructions reading in metric units.
Pentograph – brass complete in wooden case with accessories
60 cms.
Tracing table with plate glass 1250*900 cms
Over Head projector
White board
2 nos.(one
digital)
1 no.
1 no.
1 no.
1 no.
SURVEY INSTRUMENTS
SL NO.
NAME OF TOOLS /EQUIPMENT
QUANTITY
1
2
Theodolite with stand and all accessories (L.C.20”)
Electronic theodolite with moonlight LCD display and battery charger and
connecting with PC with tripod stand.
3 nos.
1 nos.
SYLLABUS FOR THE TRADE OF SURVEYOR
UNDER CRAFTSMENSHIP TRAINING SCHEME(CTS) BASED ON SEMESTER
SYSTEM
SEMISTER –IV
WEEK
PRACTICAL
NO
1
Testing plotting of ( 1:
4000) village map and
locating errors in
measurements.
2
3
4&5
6
TRADE THEORY
Vocational science &
Calculation
Load, elongation, stress and
strain, hook’s law.
Procedure in typing field
number, printing names
and inter- setting
topographical details in
maps.
Typing field numbers,
Comparison of field and
printing names and
village boundaries and side -doinserting topographical
measurement procedures
detail in maps comparison to prepare of transfer paper
of field and village
and transfer drawingboundaries and side
lithography – incography
measurements
Vandyke process,
cordography
Tracing and inking taluk,
Convergence of meridianModulus of elasticity elastic
district and state maps –
substance bar its use.
limit and yield point.
grocery of terms tracing
Grocery of terms.
of maps observation of
substance bar and its
calculation
To find the north by
Astronomical surveying
Ultimate stress and
transfer to camp
introduction. Definition of
breaking stress. Problems
observing stars and sun
spherical triangle.
on the above.
(current ) with the help of Astronomical triangle
Binding moment, shear
Nautical Almanac (camp is observation of sun and
force their definitions and
preferable)
stars. Calculation for
calculations thereof.
azimuth and time.
Coordinate system and its
conversion of, mean solar
time into side real time or
vice versa. Determination
of the meridian and
Azimuth.
Azimuth observation and Computation of latitudes
Binding moment, shear
computation and azimuth, solution of
force their definitions and
Computation of latitudes spherical triangles –
calculations thereof.
and azimuths solution of
computation of spherical
spherical triangle. Record triangles values of village
of Rights.
tri-junctions, maps-
7 to
12
13 to
15
16 to
17
18
19
20 to
23
24
projection methods of
reducing rules.
i) Concept of Operating
system software, Windows -doand their uses.
ii) Word processing and
spreadsheet sheet software
and their uses.
iii) CAD software commands
and use of different Menus.
i) Elementary windows
operating system.
ii) Use of Editor.
iii) Use of Word
processing and
spreadsheet sheet
software.
iv) CAD software and its
uses – installation of CAD,
elementary commands
and menus.
v) Latest survey software
– use of commands and
menus.
Types of bonds; plan,
Types of bonds, English
elevation and section of
bond, Flemish bonds, Tee
half and one brick thick
joints, wall junctions, stone
wall, detailed drawing of
masonry, random rubble,
parts of a building such as coursed and Ashlars stone
brick arch, stone
masonry. Type of Arch, king
masonry. Drawing of king post and queen post, doors
and queen posts trusses,
& windows RCC simple
simple doors and simple
beems and lintel.
RCC structural parts.
Drawing plan, elevation and section of simple building
by measurements, plan section and elevation.
Setting out a simple
Glossary terms of roads &
building and simple
irrigation.
culvert on the ground
from given drawing.
The trainees should visit some project with their trainer
together the correct ideas about survey project and its
importance in the society. The trainee should also
evaluate the approximate cost for a project work.
Field survey using
Concept of Total Station,
Total station, survey
commands and menus of
layout map printout using CAD software related with
CAD software with the
Total Station.
help of field data.
Preparation of estimate Building Estimating.
for residential building.
Types of estimate,
standard method of
taking out quantity, labour
& material detailed &
abstract estimate.
Different units conversion
of units of areas, volumes &
relating related to
surveying.
Estimation of simple
building.
-do-
Analysis of rates for
simple items of work.
Schedule of rates,
specifications.
25
26
Industrial training OR Project work preferably in cross sectoral trades
REVISION & TEST
LIST OF TOOLS & EQUIPMENTS FOR 20 TRAINEES
TRADE : SURVEYOR (FOR 4TH SEMESTER)
Same as Semester – I,II,III and additional list of tools & equipments are appended below:
GENERAL OUT FIT
SI
No.
1
2
3
4
5
6
7
8
9
10
Name of tools/equipment
Total station with prism 1 no. & battery charger, AC adaptor,
USB downloads port & software with stand.
Hand held G.P.S 60 with battery charger, AC adaptor, USB
download port & software.
Computer (latest version), with 19’’ colour monitor with all
accessories with latest configuration.
UPS 650 VA offline.
CAD software like Auto CAD latest version 10user licensed
Computer table.
Computer stool revolving.
A3 Printer (Colour)
A0 size Plotter
LAN connection
Quantity
1 No.
2 No.
10 Nos.
10 Nos.
1 No.
10 No.
20 No.
1 No.
1 No.
1 No.