Student’s Name with USN No.
Guide Name
HOD Name
College Name, Dept.
CONTENTS:
1.
Abstract.
2.
Objective.
3.
Block diagram.
4.
Methodology.
5.
Advantages and Disadvantages.
6.
Applications.
7.
Conclusion.
1.ABSTRACT:
GSM and GPS based vehicle location and tracking system will provide
effective, real time vehicle location, mapping and reporting this information value
and add by improving the level of service provided. A GPS-based vehicle tracking
system will inform where your vehicle is and where it has been, how long it has
been. The system uses geographic position and time information from the Global
Positioning Satellites.
2.OBJECTIVE:
The main goal of this project is to develop a system which monitors the
location of the vehicle all the times and sends the information to the caretaker
via GSM Module with respect to Co-ordinates with the help of GPS Receiver.
If accident happens to the car which has this module, then that
information about the location and accident will send to the caretaker mobile
via SMS with the help of GPS and GSM Module
3.BLOCK DIAGRAM:
BUFFER
RELAY
DRIVER
GPS RECEIVER FOR
AREA TRACKING
OUTPUT DEVICES
BUZZER
OR
DC MOTOR AS
WATER SPRINKLER
M
OR
VISUAL
INDICATION
ACCIDENT ALERT
ARM PROCESSOR
SUPPLY
16 X 2 DISPLAY
GSM TX
+12 Volts
+5 Volts
GND
230 V, AC
Supply
TRANSFORMER
RECTIFIER
FILTER
REGULATOR
HARDWARE REQUIREMENTS:
ARM 7 / Cortex M3, LCD, Relay Driver, Relays, Resistors, Capacitors, LEDs, Crystal, Diodes, Transformer, Voltage Regulator,
Push Button.
SOFTWARE REQUIREMENTS:
Keil compiler uVision 4, Language: Embedded C or Assembly, WLPRO Programmer
4.METHODOLOGY:
This module consists of accident alert system, GPS Module, GSM
Module, ARM controller unit and the output. If accident happens to the car which
has this module in it, then that signal will be to applied ARM controller and the
controller analyses the signal activates a buzzer to indicate accident has happened.
The information about the location will be transmitted to the caretaker via GSM
with respect to Co-ordinates which is received from GPS Receiver
5.ADVANTAGES AND DISADVANTAGES:
ADVANTAGES:
Flexible and reliable.
This application is easy to install and easy to operate.
More reliable than manual Operation.
 In this project losses are Minimal.
This project can implement for Security of supply.
Automatically controlled & Easy to use.
DISADVANTAGES:
It increases the cost whereas digital systems reduce the cost of system.
High Cost.
6.APPLICATIONS:
This system can be implemented in industries.
We can implement this project in all vehicles.
Where security is important there we can implement this project.
Without much change in the circuit; it can be used with any 4 wheeler.
7.CONCLUSION:
As this project is based on micro-controller(ARM7LPC2148), GPS and
GSM and this is designed and developed a low cost system based on integration
of GPS and GSM data is described. The system consists of different modules
which are linked wirelessly with GSM modems. Cost effective SMS service of
GSM network is used for the transfer of data between the modules. This service
provides the information about the location of the place where the accident has
happened via GPS and GSM Module.
THANK YOU
ANY QUESTIONS?