SECTION 08 74 13 - Card Key Access Control Hardware
ACCESS CONTROL HARDWARE
Copyright 2014 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** SDC Security Door Controls; electro-mechanical access control door
hardware.
.
This section is based on the products of SDC Security Door Controls, which is located at:
801 Avenida Acaso
Camarillo, CA 93012
Toll Free Tel: 800-413-8783
Tel: 805-494-0622
Fax: 805-494-8861
Email:request info (service@sdcsecurity.com)
Web:www.sdcsecurity.com
[Click Here] for additional information.
SDC specializes in the design and manufacture of premium grade access hardware products. As
an established leader in the industry, SDC is the largest independently owned manufacturer of
access hardware in the U.S.A.
SDC maintains and promotes a progressive quality management program based on continued
improvement of daily operations, product quality and customer satisfaction. Moreover, in a recent
survey SDC was rated #1 in quality.
See our SpecWizard:Click Here
PART 1 GENERAL
1.1
SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
A.
Access control systems, devices and accessories for the supervision and securing of
openings and gates.
1.2
RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as
required.
A.
Section 08 71 53 - Security Door Hardware.
B.
Section 28 23 00 - Video Surveillance.
C.
Section 28 13 53 - Security Access Detection.
1.3
REFERENCES
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by
the text of the edited section.
A.
ANSI/DHI A115.1 - Mortise Lock Preparation.
08 74 00-1
1.4
1.5
B.
ANSI/DHI A115.2 - Cylindrical Lock Preparation.
C.
ANSI A117.1 - American National Standard for Accessible and Useable Buildings and
Facilities.
D.
ANSI A156.2 - American National Standard for Bored and Preassembled Locks & Latches.
E.
ANSI/BHMA A156.13 - American National Standard for Mortise Locks and Latches, Series
1000.
F.
ANSI/BHMA A 156.23 - American National Standard for Electromagnetic Locks
G.
ANSI/BHMA A156.3 - American National Standard for Exit Devices
H.
ANSI/BHMA A156.24 - American National Standard for Delayed Egress Locking Systems
I.
ANSI/BHMA A156.25 American National Standard for Electrified Locking Devices
J.
ANSI/BHMA A156.31- American National Standard for Electric Strikes and Frame Mounted
Actuators
K.
ANSI A250.13 - Testing and Rating of Severe Windstorm Resistant Components for
Swinging Door Assemblies.
L.
UL10B - Fire Tests of Door Assemblies.
M.
UL 10C and UBC 7.2 (1997) - Standard for Safety for Positive Pressure Fire Tests of Door
Assemblies.
SUBMITTALS
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
DELIVERY, STORAGE, AND HANDLING
A.
1.6
PROJECT CONDITIONS
A.
1.7
Store products in manufacturer's unopened packaging until ready for installation.
Maintain environmental conditions (temperature, humidity, and ventilation) within limits
recommended by manufacturer for optimum results. Do not install products under
environmental conditions outside manufacturer's absolute limits.
WARRANTY
A.
Provide manufacturer's limited warranty for product and finishes.
1.
Security Door Controls (SDC) warrants that all new products sold by SDC shall be
free from defects in material and workmanship and shall be fit for the purpose
intended by SDC when properly installed in accordance with the appropriate factory
instructions and template for a period, from the date of shipment as follows:
2.
Lifetime: EMLock Series electromagnetic locks and Exit Check Series Delayed Egress
Electromagnetic Locks, excluding Exit Check delayed egress PC board assemblies,
purchased since January 1, 2006 shall be warranted for the life of the product. Excel
08 74 00-2
3.
4.
5.
Series Electromagnetic Locks and 600 Series power supplies purchased since
January 1, 2012 shall be warranted for the life of the product.
5 Years: All other SDC products, including Exit Check electronic PC Board
Assemblies shall be warranted for 5 years.
The extent of SDC liability for breach of warranty, when such is shown to our
satisfaction, shall be limited to a functionally equivalent replacement, or repair of such
product, or part thereof at SDC's sole discretion, when returned, delivery prepaid to
SDC. SDC shall not, except to the extent this limitation may be precluded by law, be
liable for inconvenience, labor costs, lost profit, damages to other property, injury or
any other consequential or punitive damages resulting directly or indirectly from any
product defect or breach of this warranty.
This warranty shall be limited to the original purchaser, is not transferable and shall
not apply to changes of Oil Rubbed Bronze (613/US10B) finish, which is a living finish
designed to change appearance through daily use, lamps, LED's, maintenance, wear
and tear caused by normal use, altered product, abuse or negligence.
PART 2 PRODUCTS
2.1
MANUFACTURERS
A.
Acceptable Manufacturer: SDC Security Door Controls, which is located at: 801 Avenida
Acaso ; Camarillo, CA 93012; Toll Free Tel: 800-413-8783; Tel: 805-494-0622; Fax: 805494-8861; Email:request info (service@sdcsecurity.com); Web:www.sdcsecurity.com
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with
requirements of Division 1 section on product options and substitutions.
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section 01 60
00 - Product Requirements.
** NOTE TO SPECIFIER ** Refer to literature for system components for: Interlock - Both doors
normally unlocked; Mantrap - Both doors normally locked; Mantrap - 1 door locked 1 door
unlocked.
2.2
COMMUNICATING BATHROOM, ELEVATOR LOBBY AND INTERLOCK
A.
Communicating Bathroom System Controls:
1.
For a common single bathroom shared by two patient rooms or dormitory rooms, the
CB400A controls provides privacy and ensures that both doors are locked only when
the bathroom is occupied and unlocked when the bathroom is not occupied. The
CB400B controls provide emergency access by facility staff. Both doors unlock when
signaled by the fire life safety system.
2.
Contact: SPDT 5 Amp at 30 VDC.
3.
Wire Leads: 6 inches (152 mm), 20 Gauge.
** NOTE TO SPECIFIER ** For communicating bathroom systems with EMLocks. Delete if not
required.
4.
Communicating bathroom systems with EMLocks
a.
CB401A: Located inside the bathroom. Depressing the button locks both doors
for privacy. Pressing the button again unlocks both doors ensuring both doors
are unlocked when unoccupied.
b.
CB401B: The Emergency door release (2 required) is located outside the
bathroom above or adjacent to the door. The illuminated push switch button
indicates the doors are locked. Depressing the push switch unlocks both doors.
c.
2 Electromagnetic Locks: SDC 1581VD - 650 lb (295 Kg) Holding Force or SDC
1571VD - 1200 lb (544 Kg) Holding Force.
d.
Power Supply: SDC 631RFxUR-1.
08 74 00-3
** NOTE TO SPECIFIER ** For communicating bathroom systems with Electrified Locksets. Delete
if not required.
5.
Communicating bathroom systems with Electrified Locksets:
a.
CB402A: Located inside the bathroom. Depressing the push switch locks both
doors on the outside only. Doors are always unlocked on the inside for
uninhibited egress. Exiting either door causes both doors to unlock.
b.
CB402B: The Emergency door release (2 required) is located outside the
bathroom above or adjacent to the door. The illuminated push switch button
indicates the doors are locked. Depressing the push switch unlocks both doors.
c.
Electrified Locksets: 2 each SDC Z7250 Electrified Cylindrical lock with REX
output or SDC Z7850-RD Electrified Mortise lock with REX output.
d.
Power Transfer: SDC PTH-4Q four wire power transfer hinge.
e.
Power Supply: SDC 631RFx UR-1 Power Supply.
** NOTE TO SPECIFIER ** Many high-rise building tenants that occupy a complete floor may have
a problem when it comes to securing their elevator lobby doors. The obvious reason is that these
doors lead through office space to the emergency exit stairwell doors. People must have free
access to the stairwells at all times. This leaves some companies vulnerable to transient traffic,
theft and loss of proprietary information. SDC manufactures a lobby door security system which
meets both fire life safety and security needs. Delete if not required.
2.3
2.4
ELEVATOR LOBBY DOOR SYSTEM
A.
Operation: The elevator lobby doors are normally closed and locked by a failsafe lockset.
The intercom system shall provide two-way voice communications to the security desk which
is staffed 24 hours a day. When a call is placed from the elevator lobby, the security desk
personnel can momentarily release the lockset by using the Desk Console. If there is no
response from the security desk personnel, the person in the elevator lobby may gain entry
by depressing the red exit palm push button switch. When the red exit switch is activated,
the lock will immediately release and an alarm will sound in the elevator lobby and at the
security desk console. Authorized personnel can reset the lockset and return the system to
the normal secure operation by using the panel controls. Personnel may always obtain
access to the offices by use of an access control system. Egress from the office to the lobby
is accomplished by rotating the inside lever. A power supply will provide 24 VDC power to
the locks, security desk console and relay controller board. The emergency control relay
within the power supply will turn off the system power when activated by the building fire
alarm. The lockset will release immediately when power is removed.
B.
A system engineered package shall be provided by Security Door Controls.
C.
Components:
1.
Model 7850 Selectric Lock.
2.
Model PTH-4 Power Transfer Hinge.
3.
Model E5P Card Reader or Stand Alone SDC 928 Keypad.
4.
Model APB 1000 Sign with Release Push Switch and Alarm.
5.
Model 631RF Power Supply and Fire Command Center Interface.
6.
Model DTMOMA-2, RCC or TCC Door Control Console and Annunciators.
7.
Intercom/CCTV by others.
INTERLOCK A
A.
Two door Interlock A with EmLocks. Both doors shall be normally unlocked. Opening either
door causes second door to lock until the open door is closed. When closed both doors are
unlocked. Key switch is provided to turn off system.
B.
Power Supply and Controller: 631RFx UR1.
08 74 00-4
C.
Two EmLocks with DPS required.
1.
1511VD - 1650lb EmLock with DPS.
2.
1571VD - 1200lb EmLock with DPS.
3.
1581VD - 650lb EmLock with DPS.
D.
701U + Mortise cylinder- For On/Off control.
E.
492 - Emergency Pull station to turn Off interlock.
2.5
STAND ALONE ACCESS CONTROLS
** NOTE TO SPECIFIER ** Standalone digital keypads for single doors with multiple user with
individual PIN codes. Delete if not required.
A.
Digital Keypad, Integrated:
1.
Product: Model 918 Indoor EntryCheck 500 user, 1 to 6 digits in length, programmable
for individuals or simultaneous control of 2 relay outputs and 2 voltage outputs
momentary, timed or latching as manufactured by SDC.
a.
Output Red/Green and Amber status indicators. 2 LED's.
b.
Panic Code, Disable keypad, Anti-tamper keypad lockout.
c.
Outputs: Relay #1, SPDT, 5 Amps at 30 V. Relay #2, SPDT, 2 Amp at 30 V.
Output #3 and #4, solid state open collectors, short to common, 100 mA at 30
VDC.
d.
Voltage: 12/24 VDC or AC (AC supply shall be transformer isolated).
e.
Current: 30 mA typical, 150 mA maximum.
f.
Automatic time-out REX input,
g.
Forced entry alarm.
h.
Blue illuminated keys.
** NOTE TO SPECIFIER ** Optional. Delete if not required.
2.
Plug in Power Supply: Model TR12 as manufactured by SDC Security Door Controls.
** NOTE TO SPECIFIER ** Finish U standard. Other finishes have upgrade costs. Delete finish not
required.
3.
Finish: U - 630 Stainless Steel.
4.
Finish: C - 605 Bright Brass.
5.
Finish: D - 606 Dull Brass.
6.
Finish: H - 613 Oil Rubbed Bronze.
7.
Finish: P - 625 Bright Chrome.
** NOTE TO SPECIFIER ** Delete if not required.
B.
Digital Keypad, Integrated, Indoor /Outdoor:
1.
Product: Model 920 - EntryCheck Digital Keypad as manufactured by SDC Security
Door Controls.
a.
Request-to-Exit input,
b.
500 user codes, 1-6 digits.
c.
Voltage: 12/24 VDC or AC (AC supply shall be transformer isolated).
d.
Current: 30 mA typical, 150 mA maximum.
e.
Blue illuminated keys
f.
Outputs: Relay #1, SPDT, 5 Amps at 30 V. Relay #2, SPDT, 2 Amp at 30 V.
Output #3 and #4, solid state open collectors, short to common, 100 mA at 30
VDC.
g.
Operating Temperature; -20 degree F to +130 degree F (-30 degree C to +54
degree C).
h.
Humidity: 5% to 95%, non-condensing.
** NOTE TO SPECIFIER ** Delete if not required.
C.
Digital Weatherized Piezoelectric Keypad, Integrated:
08 74 00-5
1.
Product: Model 930 - EntryCheck Digital Keypad as manufactured by SDC Security
Door Controls.
a.
6 user codes, 3-8 digits.
b.
1 to 120 second timer, tamper alarm, keypad lockout.
c.
Key pad switch life 1 billion cycles.
d.
Operating Temperature: -40 degree F to 160 degree F (-40 degree C to 70
degree C).
e.
Power 10 mA standby, 100 mA operation.
f.
1 Relay Output: SPDT dry or voltage, 2 amps at 24 VDC.
g.
2 Voltage Outputs: Short to common, 250 mA.
** NOTE TO SPECIFIER ** The 931 EntryCheck & KP touch pads are unsurpassed in their ability to
tolerate virtually any environment. Delete if not required.
D.
Product: High Security Heavy Duty Vandal Resistant Digital Piezoelectric Keypad, with
Controller, Indoor/ Outdoor:
1.
Product: Model 931 - EntryCheck Digital Keypad Controller 12/24C AC/DC with 15ft
cable as manufactured by SDC
a.
Six user code, 3 to 8 digits in length.
b.
Two SPDT relay outputs, momentary unlock and manual latching outputs
c.
Anti tailgating, tamper alarm, REX input, non volatile memory.
** NOTE TO SPECIFIER ** SDC 600 series power supplies provide power for both the locking
device and EntryCheck. Indicate power supply or delete and specify separately.
2.
Power Supply: SDC 600 series power supply, Model ___.
** NOTE TO SPECIFIER ** Select one keypad. Delete keypad model not required.
3.
Keypad: Model KP-3U - Narrow 2 by 6 frame mount, 12 button, black with stainless
steel overlay, red and green LED's.
4.
Keypad: Model KP-4U - Single gang 3 by 4 matrix, 12 button, stainless steel.
5.
Keypad Accessory: KP-3AP - Single Gang adapter plate for narrow KP-3U mounting.
** NOTE TO SPECIFIER ** Delete if not required.
E.
Standalone Card Access Control System:
1.
Product: The E4KP EntryCheck is a standalone proximity access control reader. It is
keypad programmable and does not require software or a computer. 12VDC @ 300
mA max as manufactured by SDC.
a.
HID compatible Proximity and Pin reader. 650 card users. Remote relay
module.
b.
User card shall be registered/deleted in single or batch mode (with consecutive
numbers).
c.
Up to 3 inches (152 mm) read range, weather resistant. Forced entry
alarm/duress output.
** NOTE TO SPECIFIER ** Delete accessory not required.
d.
Provide HID1326-25: ProxCard II, 25 cards.
e.
Provide HID1326-100: ProxCard II, 100 cards.
f.
Provide HID1346-10: ProxKey II, 10 key fobs.
g.
Provide HID1346-100: ProxKey II, 100 key fobs.
2.6
CARD AND KEYPAD SYSTEMS
** NOTE TO SPECIFIER ** Standalone or PC Managed, Network up to 99 Readers. Choice of
Proximity Card, or Proximity Card + PIN Entry. Delete if not required.
A.
Standalone or PC Managed Access Control System:
** NOTE TO SPECIFIER ** Delete controller and readers not required.
1.
Controller: Model E5P - Proximity and Pin Reader Controller as manufactured by SDC
Security Door Controls.
2.
Controller: Model E5C - Controller only less reader as manufactured by SDC Security
08 74 00-6
Door Controls.
** NOTE TO SPECIFIER ** Required with E5C, specify 1 or 2 optional second reader for E5 in-out
control.
3.
6005B - HID proximity reader
4.
E5PW - SDC proximity reader, HID compatible
5.
E5KPW - SDC proximity and PIN reader, HID compatible
6.
K30W - Narrow keypad Weigand reader.
7.
K40W - 1 gang keypad Weigand reader, heavy duty stainless steel.
** NOTE TO SPECIFIER ** Delete if interface not required.
8.
PC Interface Hardware: E5DI-1 RS485 to USB data converter for 1 PC.
9.
PC Interface Hardware: E5DI-2 RS485/TCP/IP data converter for multiple PC's.
Network switch required by others.
** NOTE TO SPECIFIER ** Delete cards and key fobs not required.
10.
Provide HID1326-25: ProxCard II, 25 cards.
11.
Provide HID1326-100: ProxCard II, 100 cards.
12.
Provide HID1346-10: ProxKey II, 10 key fobs.
13.
Provide HID1346-100: ProxKey II, 100 key fobs.
2.7
STAND ALONE LOCKSETS
** NOTE TO SPECIFIER ** The heavy duty weather resistant housing and keypad make the E72K-A
ideal for most indoor and outdoor applications. Easily installed, the E72K-A retrofits mechanical
cylindrical locks in only ten minutes. Delete if not required.
A.
Battery Powered Standalone Cylindrical Lockset with Digital Keypad:
1.
Product: E72KA Civic Standalone Lockset with Digital Keypad as manufactured by
SDC Security Door Controls. UL Listed, USA and Canada for 3 hour "A" label fire
rated doors. ANSI A156.25, Electrified Lockset Compliant. ANSI A156.2, Grade 2
Compliant. ANSI A117.1 Accessibility Code Compliant. ADA Compliant. California
State Reference Code (Formerly Title 19, California State Fire Marshal): Compliant.
Levers Galaxy and Eclipse return to within 1/2 inch (13 mm) of the door face. Finish:
Black Powder Coat case with dull chrome lever.
a.
160 user battery powered cylindrical digital door lock that incorporates the basic
features required to accommodate most stand alone access control
applications. 2-3/4 inches (70 mm) strike, No Audit Trail, 2-3/4 inches backset
(70 mm).
b.
ANSI A117.1 Accessibility Code Compliant.
c.
ADA Compliant. California State Reference Code (Formerly Title 19, California
State Fire Marshal): Compliant. Levers Galaxy and Eclipse return to within 1/2
inch (13mm) of the door face.
d.
Finish: Black Powder Coat case with dull chrome lever.
** NOTE TO SPECIFIER ** Lever Handles with Standard Key Cylinders. Delete lever not required.
2.
Lever and Cylinder: G1 - Galaxy lever, 6 pin cylinder with Schlage "C" Keyway.
3.
Lever and Cylinder: E1 - Eclipse lever, 6 pin cylinder with Schlage "C" Keyway.
** NOTE TO SPECIFIER ** Options: Delete options not required.
4.
Provide BS1 - 2.375 inches (60 mm) backset.
5.
Provide SK-1 - Spacer kit for 1.375 inches (35 mm) door thickness.
6.
Provide WGB - E72 Weldable gate box.
B.
Battery Powered Cylindrical Lockset with Digital Keypad:
1.
Product: Model E75K - Entrycheck Standalone Lockset with Digital Keypad as
manufactured by SDC Security Door Controls.
a.
Battery powered electronic lockset for 3000 users. Standard features include an
ANSI Grade 1 cylindrical lockset with a lever clutch mechanism, 4-6 digit pin
code, all weather keypad and housing, keypad or computer programming, 32
user groups, multi-year scheduling, temporary users, multiple zones, real time
08 74 00-7
clock, auto daylight savings adjustment and more. 9/16 inch (9.5 mm) latch, 47/8 inch (124 mm) strike standard.
b.
UL Listed, USA and Canada for 3 hour "A" label fire rated doors. ANSI
A156.25, Electrified Lockset Compliant. ANSI A156.2, Grade 2 Compliant.
c.
ANSI A117.1 Accessibility Code Compliant. ADA Compliant. California State
Reference Code (Formerly Title 19, California State Fire Marshal): Compliant.
Levers Galaxy and Eclipse return to within 1/2 inch (13mm) of the door face.
** NOTE TO SPECIFIER ** Lever Handles with/without cylinders. Delete lever not required.
2.
Lever and Cylinder: G1 - Galaxy lever, cylinder with keyway as required.
3.
Lever and Cylinder: E1- Eclipse lever, cylinder with keyway as required.
4.
G5 - Galaxy lever IC core prep, Tailpiece required.
5.
E5 Eclipse lever IC core prep, Tailpiece required.
** NOTE TO SPECIFIER ** Dull Chrome is standard. Delete finish for keypad and lock that are not
required.
6.
Keypad Finish:
a.
Q - Dull chrome.
b.
B - Black
c.
C - Polished Brass.
d.
P - Bright Chrome.
7.
Lock Finish:
a.
Q- Dull chrome.
b.
C - Polished Brass.
c.
P - Bright Chrome.
C.
Battery Powered Cylindrical Lockset with Digital Keypad and Proximity card reader:
1.
Product: Model E75P - Entrycheck Standalone Lockset with Digital Keypad and/or
Prox Card Reader as manufactured by SDC Security Door Controls.
a.
Battery powered electronic lockset for 3000 users. Standard features include an
ANSI Grade 1 cylindrical lockset with a lever clutch mechanism, 4-6 digit pin
code, all weather keypad and housing, keypad programming, 32 user groups,
multi-year scheduling, temporary users multiple zones, real time clock, auto
daylight savings adjustment and more. 9/16 inch (9.5 mm) latch, 4-7/8 inch
(124 mm) strike standard.
b.
UL Listed, USA and Canada for 3 hour "A" label fire rated doors. ANSI
A156.25, Electrified Lockset Compliant. ANSI A156.2, Grade 2 Compliant.
c.
ANSI A117.1 Accessibility Code Compliant.
d.
ADA Compliant. California State Reference Code (Formerly Title 19, California
State Fire Marshal): Compliant. Levers Galaxy and Eclipse return to within 1/2
inch (13mm) of the door face.
** NOTE TO SPECIFIER ** Lever Handles with/without cylinders. Delete lever not required.
2.
G1 - Galaxy lever, cylinder with keyway as required.
3.
E1 - Eclipse lever, cylinder with keyway as required.
4.
G5 Galaxy lever IC core prep, Tailpiece required.
5.
E5 Eclipse lever IC core prep, Tailpiece required.
** NOTE TO SPECIFIER ** Dull Chrome is standard. Delete finish for Keypad and Lock that are not
required.
6.
Keypad Finish:
a.
Q - Dull chrome.
b.
B - Black.
c.
C - Polished Brass.
d.
P - Bright Chrome.
7.
Lock Finish:
a.
Q - Dull chrome.
b.
C - Polished Brass.
c.
p - Bright Chrome.
08 74 00-8
** NOTE TO SPECIFIER ** Delete cards and key fobs not required.
8.
Card: HID1326-100 ProxCard II (100 cards) as manufactured by SDC Security Door
Controls.
9.
Card: HID1326-25 ProxCard II (25 cards) as manufactured by SDC Security Door
Controls.
10.
Key Fob: HID1346-10 ProxKey II (10 key fobs) as manufactured by SDC Security
Door Controls.
11.
Key Fob: HID1346-100 ProxKey II (100 key fobs) as manufactured by SDC Security
Door Controls.
2.8
MECHANICAL CYLINDRICAL LOCKSETS
** NOTE TO SPECIFIER ** SDC M7200. Delete if not required.
A.
Mechanical Cylindrical Lockset:
1.
Product: M7200 Series - Mechanical Cylindrical Lockset as manufactured by SDC
Security Door Controls.
2.
Door Thickness: Field adjustable for 1-3/8 inches to 2 inches (35 mm to 51mm) thick
door.
3.
ANSI/BHMA A156.2 Grade 1 strength and operational requirements. ANSI A250.13
severe windstorm compliant.
4.
UL Listed for 3 hour A' label or lesser fire rated single doors, 4 feet by 8 feet (1219
mm by 2438 mm). UL10C/UBC-2 positive pressure compliant. UL10B neutral
pressure compliant.
5.
ADA/ANSI A117.1 accessibility code compliant.
6.
California State Reference Code (CSFM): All levers, G and E, with less than 1/2 inch
(13mm) return comply with California Fire Safety Codes (Formerly Title 19, California
State Fire Marshal).
** NOTE TO SPECIFIER ** Function: Delete function not required.
7.
Function: M7201 - Passage or Closet Latch.
8.
Function: M7202 - Privacy, Bedroom or Bath Lock.
9.
Function: M7208 - Entry Lock.
10.
Function: M7210 - Classroom Lock.
11.
Function: M7212 - Store Room or Closet Lock.
12.
Function: M7224 - Communicating Passage Lock.
13.
Function: M7200E - Dummy Trim, 1 Side, Eclipse.
14.
Function: M7200G - Dummy Trim, 1 Side, Galaxy.
** NOTE TO SPECIFIER ** Lever: Delete lever not required.
15.
Lever: G1 - Galaxy.
16.
Lever: E1 - Eclipse.
17.
Lever: G5 - Galaxy, I-Core prep.
18.
Lever: E5 - Eclipse, I-Core prep .
** NOTE TO SPECIFIER ** Finish: Q - standard. Delete finish not required.
19.
Finish: C - 605 Bright Brass.
20.
Finish: D - 606 Dull Brass.
21.
Finish: H - 613 Oil Rubbed Bronze.
22.
Finish: P - 625 Bright Chrome.
23.
Finish: Q - 626 Dull Chrome.
** NOTE TO SPECIFIER ** Keying: Delete keying if not required.
24.
Keying: SDC Conventional Cylinders (Schlage 'C' Keyway standard).
** NOTE TO SPECIFIER ** For G1 and E1 levers. Delete cylinder not required.
a.
Cylinder: 6PKA - 6 PIN Keyed alike.
b.
Cylinder: 6PKD - 6 PIN Keyed different (standard).
** NOTE TO SPECIFIER ** Keying: Delete keying if not required.
25.
Keying: SDC Interchangeable Core (Best 'A' Keyway standard).
08 74 00-9
** NOTE TO SPECIFIER ** For G5 and E5 levers. Delete cylinder not required.
a.
Cylinder: IC6P-KA - 6 pin I-Core, small format, keyed alike.
b.
Cylinder: IC6P-KD - 6 pin I-Core, small format, keyed different.
c.
Cylinder: IC7P-KA - 7 pin I-Core, small format, keyed alike.
d.
Cylinder: IC7P-KD - 7 pin I-Core, small format, keyed different.
e.
None - G5 or E5 Lever Less IC Core
** NOTE TO SPECIFIER ** 70 mm latch bolt standard. Delete latch bolt not required.
26.
Latch Bolt: B1 - 2-3/4 inches (70 mm) dead latch.
27.
Latch Bolt: B2 - 2-3/8 inches (60 mm) dead latch.
28.
Latch Bolt: B3 - 2-3/4 inches (70 mm) spring latch, passage.
29.
Latch Bolt: B4 - 2-3/8 inches (60 mm) spring latch, passage.
30.
Latch Bolt: B5 - 2-3/4 inches (70 mm) spring latch, privacy.
31.
Latch Bolt: B6 - 2-3/8 inches (60 mm) spring latch, privacy.
32.
Latch Bolt: BE - 5 inches (127 mm) backset extension, for use with 2-3/4 inches (70
mm) latch only.
** NOTE TO SPECIFIER ** Strike ST1 standard. Delete strike not required.
33.
Strike: ST1 - ANSI 1-1/4 inches by 4-7/8 inches (32 mm by 124 mm).
34.
Strike: ST2 - T-Strike with dust box, ANSI 1-1/8 inches by 2-3/4 inches (29 mm by 70
mm).
35.
Strike: ST3 - Full lip strike, 1-5/8 inches by 2-1/4 inches (41 mm by 57 mm).
36.
Strike: ST4 - Full lip strike with round corners, 1-5/8 inches by 2-1/4 inches (41 mm by
57 mm).
2.9
ELECTRIFIED CYLINDRICAL LOCKSETS
A.
Electrified SDC Cylindrical Lock:
1.
Product: Model Z7200 Series Electra Pro Electrified Cylindrical Lockset as
manufactured by SDC Security Door Controls. Exceeds ANSI A156.2 Grade 1
specifications.
2.
Request-to-Exit (REX) Output Standard. Turning the inside lever for egress activates
the built in REX output providing a momentary signal to the access control REX input
for alarm shunt during egress. Outside locked, unlocked by an access control or key
from the outside.
a.
Operation: Locked on exterior only. SDC electrified Z7200 series.
b.
Voltage: Dual 12/24 VDC Input.
c.
Current: 600/300 mA at 12/24 VDC.
d.
Request to Exit (REX): Output SPDT 3 Amps at 30 VDC.
e.
Backset and Latch Bolt: 0.56 inch (14 mm) throw with 2.75 inches (70 mm)
backset.
f.
Strike: ST1 - ANSI A115.2, 1-1/4 inches by 4-7/8 inches (32 mm by 124 mm).
g.
Lever clutch for vandal resistance.
h.
Door Thickness: 1.625 inches to 2.125 inches (41 mm to 54 mm).
** NOTE TO SPECIFIER ** Delete model not required.
3.
Model Z7250 Failsafe with REX output as manufactured by SDC Security Door
Controls.
4.
Model Z7252 Failsecure with REX output as manufactured by SDC Security Door
Controls.
** NOTE TO SPECIFIER ** Delete lever not required.
5.
Lever: G - Galaxy.
6.
Lever: E - Eclipse.
** NOTE TO SPECIFIER ** Finish Q is standard. Delete finish not required.
7.
Finish: Q - 626 Dull Chrome.
8.
Finish: H - 613 Oil Rubbed Bronze.
9.
Finish: C - 605 Bright Brass.
10.
Finish: D - 606 Dull Brass.
08 74 00-10
11.
Finish: P - 625 Bright Chrome.
** NOTE TO SPECIFIER ** Delete keying if not required.
12.
Keying: SDC Conventional Cylinders (Schlage 'C' Keyway Standard).
** NOTE TO SPECIFIER ** For G1 and E1 levers. Delete cylinder not required.
a.
Cylinder: 6PKA - 6 PIN Keyed alike.
b.
Cylinder: 6PKD - 6 PIN Keyed different (standard).
** NOTE TO SPECIFIER ** Delete keying if not required.
13.
Keying: SDC Interchangeable Core (Best 'A' Keyway Standard).
** NOTE TO SPECIFIER ** For G5 and E5 levers. Delete cylinder not required.
a.
Cylinder: IC6P-KA - 6 pin I-Core, small format, keyed alike.
b.
Cylinder: IC6P-KD - 6 pin I-Core, small format, keyed different.
c.
Cylinder: IC7P-KD - 7 pin I-Core, small format, keyed different.
d.
Cylinder: IC7P-KA - 7 pin I-Core, small format, keyed alike.
** NOTE TO SPECIFIER ** Delete backset not required.
14.
Backset and Latch Bolt: B1 - 0.5625 inch (14 mm) throw with 2.75 inches (70 mm)
backset.
15.
Backset and Latch Bolt: B2 - 0.5625 inch (14 mm) throw with 2.375 inches (60 mm)
backset.
** NOTE TO SPECIFIER ** Delete strike not required.
16.
Strike: ST1 - ANSI A115.2, 1-1/4 inches by 4-7/8 inches (32 mm by 124 mm)
(Standard).
17.
Strike: ST2 - ANSI A115.2, 1-1/8 inches by 2-3/4 inches (29 mm by 70 mm) square
corners.
2.10 MECHANICAL MORTISE LOCKSETS
** NOTE TO SPECIFIER ** Grade 1 Mortise Locksets: SDC Heavy Duty Mortise Locks comply with
American National Standard Institute requirement ANSI/ BHMA 156.13 Grade 1. All our locks are
field reversible and require only simple steps for changing the hand of lock for easy installation.
Delete if not required.
A.
Mechanical Mortise Lockset:
1.
Product: M7800 Series - Mechanical Mortise Lockset as manufactured by SDC
Security Door Controls:
2.
ANSI/ BHMA 156.13 Grade 1.
3.
UL listed "A" label (3 hours) fire exit hardware in accordance with UL 10C, UBC 72(1997).
** NOTE TO SPECIFIER ** Delete functions not required.
4.
Functions: M7801 - Passage.
5.
Functions: M7804 - Office.
6.
Functions: M7805 - Classroom.
7.
Functions: M7807 - Storeroom.
8.
Functions: M7809 - Apartment Entrance / Vestibule.
9.
Functions: M7813 - Corridor / Exit.
10.
Functions: M7820 - Entrance.
11.
Functions: M7822 - Privacy.
12.
Functions: M7871 - Single Dummy Trim.
13.
Functions: M7872 - Double Dummy Trim.
14.
Functions: M7875 - Single Dummy Trim with Chassis.
15.
Functions: M7876 - Double Dummy Trim with Chassis.
** NOTE TO SPECIFIER ** Delete handing not required.
16.
Handing: L - Left hand.
17.
Handing: LR - Left hand reversed.
18.
Handing: R - Right hand.
19.
Handing: RR - Right hand reversed.
08 74 00-11
** NOTE TO SPECIFIER ** Finish Q standard. Delete finish not required.
20.
Finish: C - 605 Bright Brass.
21.
Finish: D - 606 Dull Brass.
22.
Finish: F - 611 Bright Bronze.
23.
Finish: G - 612 Dull Bronze.
24.
Finish: H - 613 Oil Rubbed Bronze.
25.
Finish: P - 625 Bright Chrome.
26.
Finish: Q - 626 Dull Chrome.
27.
Finish: S - 629 Bright Stainless Steel.
** NOTE TO SPECIFIER ** Delete trim not required.
28.
Lever Trim: G - Galaxy with rose.
29.
Lever Trim: GE - Galaxy with escutcheon.
30.
Lever Trim: E - Eclipse with rose.
31.
Lever Trim: EE - Eclipse with escutcheon.
32.
Lever Trim: N - Nova with rose.
33.
Lever Trim: NE - Nova with escutcheon.
34.
Lever Trim: 07 - Schlage equivalent with SDC B rose.
35.
Lever Trim: 07E - Schlage equivalent with SDC escutcheon.
36.
Lever Trim: 12 - Schlage equivalent with SDC B rose.
37.
Lever Trim: 12E - Schlage equivalent with SDC escutcheon.
** NOTE TO SPECIFIER ** Delete cylinder not required.
38.
Keyed Cylinder Optional: CYL-6KDQ - 6 pin, 1.125 inches (29 mm) mortise cylinder,
keyed different, dull chrome.
39.
Keyed Cylinder Optional: CYL-6KAQ - 6 pin, 1.125 inches (29 mm) mortise cylinder,
keyed alike, dull chrome.
2.11 ELECTRIFIED MORTISE LOCKSETS
A.
ANSI Grade 1 Heavy Duty - Electrified Mortise Lockset:
1.
Product: Z7800 Selectric Pro Electrified Mortise Lockset as manufactured by SDC
Security Door Controls.
a.
UL Listed for 3 hour fire rated doors.
b.
Field selectable Failsafe or Failsecure.
c.
Field selectable function: Locked outside only or both sides.
d.
Field selectable 12/24 VDC.
e.
Field selectable handing.
** NOTE TO SPECIFIER ** Delete function not required.
2.
Function: Z7830 Failsafe, locked both sides.
3.
Function: Z7832 Failsecure, locked both sides.
4.
Function: Z7850 Failsafe, locked outside.
5.
Function: Z7852 Failsecure, locked outside.
6.
Function: Z7835 Proprietary design. Locked outside and/or inside. Outside failsecure,
inside failsafe. 12vdc or 24vdc as scheduled or required.
** NOTE TO SPECIFIER ** Delete handing not required.
7.
Handing: L - Left hand.
8.
Handing: LR - Left hand reversed.
9.
Handing: R - Right hand.
10.
Handing: RR - Right hand reversed.
** NOTE TO SPECIFIER ** Finish Q standard. Delete finish not required.
11.
Finish: C - 605 Bright Brass.
12.
Finish: D - 606 Dull Brass.
13.
Finish: F - 611 Bright Bronze.
14.
Finish: G - 612 Dull Bronze.
15.
Finish: H - 613 Oil Rubbed Bronze.
16.
Finish: P - 625 Bright Chrome.
08 74 00-12
17.
Finish: Q - 626 Dull Chrome.
18.
Finish: S - 629 Bright Stainless Steel.
19.
Finish: U - 630 Dull Stainless.
** NOTE TO SPECIFIER ** Delete trim not required.
20.
Lever Trim: G - Galaxy with rose.
21.
Lever Trim: GE - Galaxy with escutcheon.
22.
Lever Trim: E - Eclipse with rose.
23.
Lever Trim: EE - Eclipse with escutcheon.
24.
Lever Trim: N - Nova with rose.
25.
Lever Trim: NE - Nova with escutcheon.
26.
Lever Trim: 07 - Schlage equivalent with SDC B rose.
27.
Lever Trim: 07E - Schlage equivalent with SDC escutcheon.
28.
Lever Trim: 12 - Schlage equivalent with SDC B rose.
29.
Lever Trim: 12E - Schlage equivalent with SDC escutcheon.
** NOTE TO SPECIFIER ** Delete suffix option not required.
30.
Suffix: R - Request-to-exit, SPDT.
31.
Suffix: D - Door Status, SPDT.
32.
Suffix: S - Latched and Locked, SPDT.
** NOTE TO SPECIFIER ** Delete cylinder not required.
33.
Keyed Cylinder Optional: CYL-6KDQ - 6 pin, 1.125 inches (29 mm) mortise cylinder,
keyed different, dull chrome.
34.
Keyed Cylinder Optional: CYL-6KAQ - 6 pin, 1.125 inches (29 mm) mortise cylinder,
keyed alike, dull chrome.
** NOTE TO SPECIFIER ** Send the brand lockset of your choice to SDC for electrification. When
factory authorized, distributors may take advantage of SDC's mechanical lock inventory to
expedite orders. SDC stocks Schlage, Corbin Russwin, Yale, Best and Sargent mechanical locks
that may be electrified and charged to an order. Meanwhile, distributors may then send
replacement mechanical locks to SDC for credit and SDC inventory replenishment. Refer to
manufacturer's literature. Delete if not required.
B.
Electrified Mortise Lockset Modification:
1.
Product: 7800 Series Selectric Mod Electrified Mortise Lockset as manufactured by
SDC Security Door Controls.
** NOTE TO SPECIFIER ** HiTower - Electric Frame Actuator Controlled Locksets The HiTower
utilizes SDC's original concept of utilizing an electric frame actuator to control a mechanical lock
in the door, eliminating the cost and labor associated with a power transfer hinge and wires
through the door. Type: HiTower Z7500 ( SDC brand Grade 1 Heavy Duty lockset Field selectable
function, Locked outside only or both sides). Type: HiTower Conversions (Distributors provide a
new mechanical lock brand of choice to the factory for conversion to an electric frame actuator
controlled lockset). Refer to manufacturer's literature. Delete if not required.
C.
Electrified Mortise Frame Actuated Lockset:
1.
Product: Z7500 HiTower Actuator Controlled Lockset as manufactured by SDC
Security Door Controls.
** NOTE TO SPECIFIER ** Delete function not required.
2.
Function: Z7530 Failsafe, locked both sides.
3.
Function: Z7550 Failsafe, locked outside.
4.
Function: Z7560 Failsecure, locked both sides (SDC brand lock only).
5.
Function: Z7570 Failsecure, locked outside (SDC brand lock only)
** NOTE TO SPECIFIER ** Delete handing not required.
6.
Handing: L - Left hand.
7.
Handing: LR - Left hand reversed.
8.
Handing: R - Right hand.
9.
Handing: RR - Right hand reversed.
08 74 00-13
** NOTE TO SPECIFIER ** Delete voltage not required
a.
Failsafe 115 vac - A.
b.
Failsafe 24 vac - B.
c.
Failsafe - 24 vdc - C.
** NOTE TO SPECIFIER ** Finish Q standard. Delete finish not required.
10.
Finish: C - 605 Bright Brass.
11.
Finish: D - 606 Dull Brass.
12.
Finish: F - 611 Bright Bronze.
13.
Finish: G - 612 Dull Bronze.
14.
Finish: H - 613 Oil Rubbed Bronze.
15.
Finish: P - 625 Bright Chrome.
16.
Finish: Q - 626 Dull Chrome.
17.
Finish: S - 629 Bright Stainless Steel.
18.
Finish: U - 630 Dull Stainless.
** NOTE TO SPECIFIER ** Delete trim not required.
19.
Lever Trim: G - Galaxy with rose.
20.
Lever Trim: GE - Galaxy with escutcheon.
21.
Lever Trim: E - Eclipse with rose.
22.
Lever Trim: EE - Eclipse with escutcheon.
23.
Lever Trim: N - Nova with rose.
24.
Lever Trim: NE - Nova with escutcheon.
25.
Lever Trim: 07 - Schlage equivalent with SDC B rose.
26.
Lever Trim: 07E - Schlage equivalent with SDC escutcheon.
27.
Lever Trim: 12 - Schlage equivalent with SDC B rose.
28.
Lever Trim: 12E - Schlage equivalent with SDC escutcheon.
** NOTE TO SPECIFIER ** Delete suffix options not required.
29.
Suffix: L - Latch status switch, SPDT.
30.
Suffix: S - Latched and Locked status, SPDT.
** NOTE TO SPECIFIER ** Delete cylinder not required.
31.
Keyed Cylinder Optional: CYL-6KDQ - 6 pin, 1.125 inches (29 mm) mortise cylinder,
keyed different, dull chrome.
32.
Keyed Cylinder Optional: CYL-6KAQ - 6 pin, 1.125 inches (29 mm) mortise cylinder,
keyed alike, dull chrome.
** NOTE TO SPECIFIER ** Power Transfer Hinge Application Installed in the center hinge position
of the door, PTH Power Transfer Hinges provide the concealed wires required to transfer power
from the frame to electric hardware in the door for control and monitoring capability. Delete if not
required.
D.
Power Transfer Hinges (PTH):
1.
UL 10B listed for 3 hour fire doors. 4.5 by 4.5 five knuckle standard weight. 5 feet
(1524 mm) cable as manufactured by SDC Security Door Controls.
** NOTE TO SPECIFIER ** Delete product not required.
2.
Product: Model PTH-4 - Four wires, 1 Amp at 12/24 VDC per pair as manufactured by
SDC Security Door Controls.
3.
Product: Model PTH-2+4 - 16 Amp inrush, 6 wire. 1 pair 16 Amp inrush, 4 Amp
continuous. 2 pair 1 Amp @ 12/24V as manufactured by SDC Security Door Controls.
4.
Product: Model PTH-10 - Ten Wires, 1 Amp at 12/24/VDC as manufactured by SDC
Security Door Controls.
** NOTE TO SPECIFIER ** Finish Q standard. Delete finish not required.
5.
Steel Finish: Q - 626 Dull Chrome.
6.
Steel Finish: H - 613 Oil Rubbed Bronze.
7.
Steel Finish: C - 605 Bright Brass.
8.
Steel Finish: P - 625 Bright Chrome.
** NOTE TO SPECIFIER ** Option: Delete if not required.
08 74 00-14
9.
DPS - Door position switch. SPDT, 250mA at 30 VDC.
2.12 MECHANICAL EXIT DEVICE
A.
Mechanical Exit Devices:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Spectra S6000 Series Exit Device as manufactured by SDC Security Door
Controls.
2.
Product: Spectra N6000 Series Narrow Head Exit Device as manufactured by SDC
Security Door Controls.
3.
UL & ULC Listed panic and fire exit hardware. ANSI/BHMA A156.3-2001 Grade 1
Compliant. CA Title 19 Compliant. Meets/Exceeds ADA requirements. UBC 97,
Standard 7.2.
** NOTE TO SPECIFIER ** Model Delete model not required.
4.
Model S61 - Rim or rim mount.
5.
Model N61 - Rim or Rim mount - Narrow
6.
Model S62 - Surface vertical rod.
7.
Model N62 - Surface vertical rod - Narrow
8.
Model S63 - Mortise.
9.
Model S68 - Concealed vertical rod for metal doors.
10.
Model N68 - Concealed vertical rod for metal doors - Narrow
** NOTE TO SPECIFIER ** ANSI Functions: Delete function not required.
11.
Function: 01 - Exit only, No Trim.
12.
Function: 02 - Dummy Pull or Lever (opens when dogged).
13.
Function: 03 - Pull with cylinder or cylinder only, key latch retraction.
14.
Function: 08 - Lever with key locks/unlocks lever.
15.
Function: 14 - Lever trim always active.
** NOTE TO SPECIFIER ** Delete dogging not required.
16.
Dogging: P - Panic Exit Device, mechanical dogging.
17.
Dogging: P CD - Panic Exit Device, key cylinder dogging.
18.
Dogging: F - Fire Exit Device, dogging not permitted.
** NOTE TO SPECIFIER ** Delete handing not required.
19.
Handing: RR - Right hand reverse bevel, RHRB.
20.
Handing: LR - Left hand reverse bevel, LHRB.
** NOTE TO SPECIFIER ** Finish: Delete finish not required.
21.
Finish: U - 630 Dull Stainless Steel. (Std).
22.
Finish: C - 605 Bright Brass.
23.
Finish: H - 613 Oil Rubbed Bronze.
24.
Finish: D - 606 Dull Brass.
25.
Finish: P - 625 Bright Chrome.
26.
Finish: G - 612 Dull Bronze.
27.
Finish: Q - 626 Dull Chrome.
** NOTE TO SPECIFIER ** Length: Delete door width not required.
28.
Length: 36 inches (914 mm) door.
29.
Length: 42 inches (1067 mm) door.
30.
Length: 48 inches (1219 mm) door.
** NOTE TO SPECIFIER ** Trim: Delete trim not required.
31.
Mechanical Trim: EK - Eclipse (Function & finish to match device).
32.
Mechanical Trim: GK - Galaxy (Function & finish to match device).
33.
Mechanical Trim: SP - Saturn (Function & finish to match device)
34.
Mechanical Trim: EN - Eclipse Narrow (Function & finish to match device).
35.
Mechanical Trim: GN - Galaxy Narrow (Function & finish to match device).
36.
Mechanical Trim: SN - Saturn Narrow (Function & finish to match device).
08 74 00-15
2.13 ELECTRIFIED EXIT DEVICE
** NOTE TO SPECIFIER ** Check with factory when multiple electrified options are required for an
exit bar.
A.
Exit Devices:
1.
UL & ULC Listed panic and fire exit hardware. ANSI/BHMA A156.3-2001 Grade 1
Compliant. CA Title 19 Compliant. Meets/Exceeds ADA requirements. UBC 97,
Standard 7.2.
** NOTE TO SPECIFIER ** Delete product not required.
2.
Product: Spectra N6000 Series Narrow Head Exit Device as manufactured by SDC
Security Door Controls
3.
Product: Spectra S6000 Series Exit Device as manufactured by SDC Security Door
Controls
** NOTE TO SPECIFIER ** Delete model not required.
4.
Model S61 - Rim or rim mount.
5.
Model N61 - Rim or Rim mount - Narrow.
6.
Model S62 - Surface vertical rod.
7.
Model N63 - Surface vertical rod - Narrow.
8.
Model S63 - Mortise.
9.
Model S68 - Concealed vertical rod for metal doors.
10.
Model N68 - Concealed vertical rod - Narrow.
** NOTE TO SPECIFIER ** ANSI Functions: Delete function not required.
11.
Function: 01 - Exit only, No Trim.
12.
Function: 02 - Dummy Pull or Lever (opens when dogged).
13.
Function: 03 - Pull with cylinder or cylinder only, key latch retraction.
14.
Function: 08 - Lever with key locks/unlocks lever.
15.
Function: 14 - Lever trim always active.
** NOTE TO SPECIFIER ** Delete dogging not required.
16.
Dogging: P - Panic Exit Device, mechanical dogging.
17.
Dogging: P CD - Panic Exit Device, key cylinder dogging. (Mortise Cyl not included).
18.
Dogging: F - Fire Exit Device, dogging not permitted.
** NOTE TO SPECIFIER ** Delete handing not required.
19.
Handing: RR - Right hand reverse bevel, RHRB.
20.
Handing: LR - Left hand reverse bevel, LHRB.
** NOTE TO SPECIFIER ** Finish: Delete finish not required.
21.
Finish: U - 630 Dull Stainless Steel. (Std).
22.
Finish: C - 605 Bright Brass.
23.
Finish: H - 613 Oil Rubbed Bronze.
24.
Finish: D - 606 Dull Brass.
25.
Finish: P - 625 Bright Chrome.
26.
Finish: G - 612 Dull Bronze.
27.
Finish: Q - 626 Dull Chrome.
** NOTE TO SPECIFIER ** Length: Delete door width not required.
28.
Length: 36 inches (914 mm) door.
29.
Length: 42 inches (1067 mm) door.
30.
Length: 48 inches (1219 mm) door.
** NOTE TO SPECIFIER ** Delete signal output not required.
31.
Signal Output: R - Request-To-Exit Output, SPDT.
32.
Signal Output: L - Latch Status Output, SPDT.
** NOTE TO SPECIFIER ** Electrified Latch Retraction for rim mount, vertical rod and mortise.
Delete remote operation if not required. For use with SDC 602RF and 632RF Power Supplies.
33.
Remote Operation: E - Electric Latch Retraction.
a.
Voltage: 24 VDC at 450mA activation, 180 mA continuous.
08 74 00-16
b.
c.
Operation: Momentary or maintained latch bolt and push pad retraction.
EMC - Sequencer Module required for pair of doors and automatic doors. 24
VDC.
** NOTE TO SPECIFIER ** Electrified Mortise Exit Devices. Delete remote operation if not required.
34.
Remote Operation: M - Electrified Mortise Exit Devices. MF - Fail Safe or MS - Fail
Secure.
a.
Field reversible failsecure/failsafe, unlocks by access control, power loss or
signal from fire command center. Door stays latched even when unlocked.
b.
Complies with national building and fire codes.
c.
12/24 VDC at 600/300 mA.
** NOTE TO SPECIFIER ** Options. Delete if not required.
d.
Provide DPS - Door Position Status.
e.
Provide L - Latch status.
** NOTE TO SPECIFIER ** Options: Delete if not required.
35.
Operation: G - Electric Dogging. Exit bar pad must be manually pushed down for
electric dogging to hold exit bar pad down.
a.
Voltage: 12/24VDC at 170/100 mA.
** NOTE TO SPECIFIER ** Options: Delete if not required.
b.
KS - Built-in on/off key switch. (Cylinder not included).
** NOTE TO SPECIFIER ** Delete if not required.
36.
Controlled Access Fire Exit Device: Hitower Pro S6303FH Frame Actuator Controlled
Fire Exit Device as manufactured by SDC Security Door Controls.
a.
Failsafe operation and unlocks by access control, power loss or signal from fire
command center. Door stays latched even when unlocked. All wiring is
maintained in the strike jamb. Complies with national building and fire codes.
b.
Specify handing: LH,RH,LHR,RHR.
** NOTE TO SPECIFIER ** Delete power source not required.
c.
Voltage: 24 VDC.
d.
Voltage: 24 VAC.
e.
Voltage: 115 VAC.
** NOTE TO SPECIFIER ** Delete if not required. Not available with other options - E,G, Alarm A/B.
37.
Delayed Egress: Model DE - Electrification of exit device and wall mount controller
with keypad control and reset.
** NOTE TO SPECIFIER ** Delete accessory not required.
a.
Provide DEC-J - 3 Gang Interior surface mount box for 101-DE.
b.
Provide SHD-J - Shroud for surface mount box DE-J outdoor use.
** NOTE TO SPECIFIER ** Delete if not required. Not available with other options - E,G, Alarm A/B.
38.
Delayed Egress: Model KDE - Electrification of exit device and wall mount controller
with both keypad and key switch control and reset, less cylinder.
** NOTE TO SPECIFIER ** Exit alarm kit for rim mount, mortise, vertical rod. Delete if not required.
Not available with other options - E, G, DE/KDE.
39.
Exit Alarm: Model A - Exit Alarm, 9V Battery Powered.
40.
Exit Alarm: Model B - Exit Alarm with 12/24V AC/DC input (9V battery provides power
backup).
** NOTE TO SPECIFIER ** Alarm Options. Delete alarm not required.
a.
Alarm: AR6 - 6 or 10 minute alarm with auto rearm and manual key reset.
b.
Alarm: AR20 - 20 minute alarm with auto rearm and manual key reset.
c.
Alarm: AD1 - 1 second arming delay.
** NOTE TO SPECIFIER ** Trim: Delete trim not required.
41.
Mechanical Trim: EK - Eclipse (Function and finish to match device).
42.
Mechanical Trim: GK - Galaxy (Function and finish to match device).
43.
Mechanical Trim: SP - Saturn (Function and finish to match device).
44.
Mechanical Trim EN - Eclipse Narrow (Function and finish to match device).
08 74 00-17
45.
Mechanical Trim GN - Galaxy Narrow (Function and finish to match device).
46.
Mechanical Trim SN - Saturn Narrow (Function and finish to match device).
** NOTE TO SPECIFIER ** Electric Trim: Delete trim not required.
47.
Electrified Trim: EKE03 - Eclipse (finish to match device).
48.
Electrified Trim: EKE03_LT - Eclipse with LED (finish to match device).
49.
Electrified Trim: GKE03 - Galaxy (finish to match device).
50.
Electrified Trim: GKE03_LT - Galaxy with LED (finish to match device).
a.
Failsecure, field reversible to failsafe, audible tone, 4 feet (1219 mm) cable and
connectors, 12/24 VDC at 600/300 mA.
** NOTE TO SPECIFIER ** Delete Electric Trim Options not required.
b.
Electric Trim: LT - Tricolor LED Indicator.
c.
Electric Trim: LS - Locked/unlocked status, SPDT 3 Amp contact.
2.14 ELECTRIC STRIKES
A.
Electric Strikes:
1.
Non handed, 200 ma @ 12 VDC.
2.
Accommodates up to 3/4 inch (19 mm) latch bolts with 1/8 inch (3 mm) gap.
3.
All stainless steel parts with durable die cast body for corrosion resistance, 630 Satin
stainless steel face plate.
4.
Not recommended for wood frame applications
** NOTE TO SPECIFIER ** Delete model not required.
5.
Product: Model 15-4FU - 4.875 inches (124 mm), Failsafe as manufactured by SDC
Security Door Controls.
6.
Product: Model 15-4SU - 4.875 inches (124 mm), Failsecure as manufactured by SDC
Security Door Controls.
B.
Electric Strikes for Cylindrical Locks:
1.
Product: Model 25-4U - 4.875 inches (124 mm), 300mA at 12VDC or 150mA at
24VDC as manufactured by SDC Security Door Controls.
2.
For up to 5/8 inch (16 mm) latch bolts.
3.
Field selectable failsafe/failsecure.
4.
Field selectable 12/24 V AC/DC.
5.
Latch status output.
6.
Non handed reversible.
7.
All stainless steel parts with durable die cast body for corrosion resistance, 630 Satin
stainless steel face plate.
8.
Not recommended for wood frame applications
C.
Universal Commercial Duty Electric Strikes:
1.
Up to 3/4 inch (19 mm) latch bolts. 1/4 inch (6 mm) horizontal alignment adjustment.
Low profile 1-1/8 inches (29 mm) deep.
2.
Field selectable failsafe/failsecure. Field selectable 170 mA/280 mA at 12VAC/DC or
85 mA/140 mA at 24VAC/DC. Latch Position Status: SPDT, Dry 3 Amp at 30 V.
Keeper Closed and Locked Status: SPDT, Dry 3 Amp at 30 V.
** NOTE TO SPECIFIER ** Delete model not required.
3.
Product: Model 45-4SU - 4.875 inches (124 mm) square corners as manufactured by
SDC Security Door Controls.
4.
Product: Model 45-4RV - 4.875 inches (124 mm) radius corners as manufactured by
SDC Security Door Controls.
5.
Product: Model 45-6RV - 6.875 inches (175 mm) radius corners as manufactured by
SDC Security Door Controls.
6.
Product: Model 45-7RV - 7.937 inches (202 mm) radius corners as manufactured by
SDC Security Door Controls.
** NOTE TO SPECIFIER ** Finish: Delete finish not required.
08 74 00-18
7.
Finish: U - 630 Dull Stainless Steel.
8.
Finish: V - 628 Dull Aluminum.
9.
Finish: Y - 335 Black Anodized.
10.
Finish: D - 606 Dull Brass.
11.
Finish: H - 613 Oil Rubbed Bronze.
** NOTE TO SPECIFIER ** Delete Buzzer and Keeper options if not required.
12.
Provide Buzzer RMB 12/24 V AC/DC operation.
13.
Provide Keeper Open or Closed status Option K SPDT, Dry 3 Amp at 30 V.
D.
Rim Mount Electric Strike:
1.
Product: 30-4-12 - Stainless steel electric strike designed for rim-type exit devices
12VDC@ 0.51Amp.
2.
Product: 30-4-24 - Stainless steel electric strike designed for rim-type exit devices
24VDC@ 0.25Amp.
3.
Finish: U - 630 Dull Stainless.
** NOTE TO SPECIFIER ** Delete options not required.
4.
Provide FS - Failsafe operation.
5.
Provide BR64XL - Rectifier.
6.
Provide LCBMA-30 - Latch and locking cam monitor.
E.
Extra Heavy Duty Electric Strikes:
1.
Multiple faceplates provided to accommodate all cylindrical and mortise locksets
without/with dead bolts.
2.
UL Listed for fire doors. Fits standard ANSI frame prep with slight modification. All
stainless steel parts.
3.
Product: Model 55-ABCU- 300mA/600mA at 24VDC/12VDC as manufactured by SDC
Security Door Controls. For cylindrical and mortise locksets without deadbolt.
4.
Product Model 55-AU - For cylindrical locksets.
5.
Product Model 55-BU - For mortise locksets with deadlatch below latch bolt.
6.
Product Model 55-CU - For mortise locksets with deadlatch above latchbolt.
7.
Product Model 55-DU - For mortise locksets with deadbolt and the deadlatch below
the latch bolt (Door will not close with deadbolt projected).
8.
Product Model 55-EU - For mortise locksets with deadbolt and no deadlatch (Door will
not close with deadbolt projected).
9.
Product Model 55-FU - For mortise locksets with deadlatch and deadbolt above
latchbolt. (Door will not close with deadbolt projected).
** NOTE TO SPECIFIER ** Delete latch, lock status and deadbolt status if not required.
10.
Provide Latch Bolt Status - LBM.
11.
Provide Latch & Lock Status - LBM/LCM.
12.
DBM-L or DBM-R - Deadbolt monitor switch. - R or - L as scheduled or required.
2.15 ELECTRIC BOLT LOCKS
** NOTE TO SPECIFIER ** The Spacesaver®, first designed and patented by SDC, is a fundamental
innovation in electric locking technology for access control applications. The stainless steel bolt
projects at right angles to the lock mechanism, allowing installation of Spacesaver® locks, by
means of a simple cutout, in virtually any standard 1.5 inches frame. Delete if not required.
A.
Bolt Locks, Mortise:
1.
Spacesaver Series as manufactured by SDC Security Door Controls. The stainless
steel bolt projects at right angles to the lock mechanism minimizing installation space
requirements.
2.
Auto relock switch, 12/24 VDC operation.
** NOTE TO SPECIFIER ** Delete product not required.
3.
Product: Model Spacesaver 1091AI - Failsafe Bolt Lock as manufactured by SDC
Security Door Controls. Dual Voltage Coil: 900/450 mA @ 12/24 VDC.
08 74 00-19
4.
Product: Model Spacesaver 1091ADLI - Failsafe Deadlocking Bolt Lock as
manufactured by SDC Security Door Controls. Dual Voltage Coil: 900/450 mA @
12/24 VDC.
5.
Product: Model Spacesaver 1291AH - Failsecure Bolt Lock as manufactured by SDC
Security Door Controls. Dual Voltage Coil: 900/450 mA @ 12/24 VDC. Note - Will not
unlock without power.
6.
Product: Model Spacesaver 1490AI - Failsafe Bolt Lock, Super Narrow as
manufactured by SDC Security Door Controls. Dual Voltage Coil: 900/450 mA @
12/24 VDC.
7.
Product: Model Spacesaver 2490AH - Failsecure Bolt Lock, Super Narrow as
manufactured by SDC Security Door Controls. Dual Voltage Coil: 900/450 mA @
12/24 VDC. Note - Will not unlock without power.
8.
Product: Model Spacesaver 1190AU - Failsafe Bolt Lock, Narrow, Extra Heavy Duty
as manufactured by SDC Security Door Controls. 0.7Amp @ 24VDC. Standard finish
type U.
9.
Product: Model Spacesaver 2090AU - Failsecure Bolt Lock, Narrow, Extra Heavy
Duty as manufactured by SDC Security Door Controls. 2.5 Amp In rush, 0.4 Amp
seated @ 24VDC. Standard finish type U. Note - Will not unlock without power.
** NOTE TO SPECIFIER ** Conventional failsafe locking bolts rely solely on a spring to retract the
bolt while the FS23M bolt will unlock with or without the assistance of the spring. This is the only
electric bolt lock listed by the California State Fire Marshal for locking of perimeter entrance and
emergency exit doors after-hours.
10.
Product: Model Spacesaver FS23MI - Bolt Lock, Narrow, Dual Failsafe, CSFM Listed
as manufactured by SDC Security Door Controls. Dual Voltage Coil: 900/450 mA @
12/24 VDC.
** NOTE TO SPECIFIER ** Aluminum Finish is standard. Delete finish not required.
11.
Finish: V - 628 Aluminum.
12.
Finish: Y - 335 Black Anodized.
13.
Finish: C - 605 Bright Brass.
14.
Finish: D - 606 Dull Brass.
15.
Finish: F - 611 Bright Bronze.
16.
Finish: G - 612 Dull Bronze.
17.
Finish: H - 613 Oil Rubbed Bronze.
18.
Finish: P - 625 Bright Chrome.
19.
Finish: Q - 626 Dull Chrome.
20.
Finish: U - 630 Satin Stainless Steel.
** NOTE TO SPECIFIER ** Delete option not required.
21.
Provide PR-1000 - Power regulator and heat reducer for 1091, 1291, 1190, FS23
22.
Provide B - Magnetic Bolt Status Switch. SPDT 0.25 Amp @ 30VDC. Indicates bolt
locked and unlocked.
23.
Provide D - Mechanical Door Position Switch. SPDT 5 Amps at 30VDC. Integral to the
auto relock ball switch assembly. Indicates, door closed and door open.
Recommended for minimum security applications only.
24.
Provide BR64XL - Rectifier for AC operation.
B.
Top Latch Release for Dor-O-Matic and Kawneer Vertical Rod Exit Devices:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model PD2090ALU - LH/RHR failsecure as manufactured by SDC Security
Door Controls. 24VDC, 2.5 A Inrush, .4A seated.
2.
Product: Model PD2090ARU - RH/LHR failsecure as manufactured by SDC Security
Door Controls. 24VDC, 2.5 A Inrush, .4A seated.
3.
Stainless steel finish standard.
** NOTE TO SPECIFIER ** Delete option not required.
4.
Provide B - Magnetic Bolt Status Switch. SPDT 0.25 Amp @ 30VDC. Indicates bolt
locked and unlocked.
08 74 00-20
5.
6.
Provide D - Mechanical Door Position Switch. SPDT 5 Amps at 30VDC. Integral to the
auto relock ball switch assembly. Indicates, door closed and door open.
Recommended for minimum security applications only.
Provide BR64XL - Rectifier for AC operation.
C.
Conventional Bolt Locks, Mortise: Not for Wood applications.
** NOTE TO SPECIFIER ** The 110 and 210 are the most basic bolt locks available. The bolt
assembly is adjustable forward up to 1 inch (25.4 mm) past the face plate to accommodate wide
door gaps or special applications. Delete model and dimensions if not required. Not for wood
applications.
1.
Product: Model 110 - Failsafe Mortised Bolt Lock as manufactured by SDC Security
Door Controls. Dual Voltage Coil: 900/450 mA @ 12/24 VDC.
2.
Product: Model 210 - Failsecure Mortised Bolt Lock as manufactured by SDC Security
Door Controls. Dual Voltage Coil: 900/450 mA @ 12/24 VDC. Note - Will not unlock
without power.
a.
Faceplate 2.75 inches H by 1.25 inches W by 0.125 inch D (69.85 by 31.75 by
3.175 mm).
b.
Strike 2.75 inches H by 1.25 inches W by 0.125 inch D (69.85 by 31.75 by
3.175 mm).
** NOTE TO SPECIFIER ** The 160 and 260 are equipped with an auto relock switch. Field
adjustable for wide door gaps, the auto relock switch keeps the bolt retracted when the door is
open and when depressed upon door closure, relocks the door automatically. The bolt assembly
is also adjustable for wide door gaps. Delete product and dimensions if not required. Not for wood
applications
3.
Product: Model 160 - Failsafe Mortised Bolt Lock as manufactured by SDC Security
Door Controls. Dual Voltage Coil: 900/450 mA @ 12/24 VDC.
4.
Product: Model 260 - Failsecure Mortised Bolt Lock as manufactured by SDC Security
Door Controls. Dual Voltage Coil: 900/450 mA @ 12/24 VDC. Note - Will not unlock
without power.
a.
Faceplate 4.875 inches H by 1.25 inches W by 0.125 inch D (126.84 by 31.75
by 3.175 mm).
b.
Strike 4 inches H by 1.25 inches W by 0.125 inch D (101.6 by 31.75 by 3.175
mm).
5.
Bolt: Solid stainless steel finish 0.625 inch diameter by 0.5 inch throw (15.87 mm by
12.7 mm).
6.
Finish: V - 628 Clear Anodized Aluminum.
** NOTE TO SPECIFIER ** The 290 Micro Cabinet Lock is designed to electronically secure
cabinets and drawers. Keys are eliminated and the addition of a keypad or remote control
provides true access control and convenience. Delete if not required.
D.
Micro Bolt Lock, Cabinet:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model 290 - Micro cabinet lock as manufactured by SDC Security Door
Controls.
2.
Product: Model 290LS - Micro cabinet lock with lock status switch as manufactured by
SDC Security Door Controls.
3.
Dual Voltage: 250/130 mA at 12/24 VDC.
4.
Dimensions: 3.25 inches L by 1.125 inches W by 1.125 inches D (82.5 by 28.5 by
28.5 mm).
** NOTE TO SPECIFIER ** The SDC universal surface mount electric bolt locks are available in
failsafe and failsecure. The addition of a card reader, digital keypad or remote control provides
access control and convenience of use for a variety of applications. Delete if not required.
E.
Bolt Locks, Surface Mount:
1.
Lock Dimensions: 6 inches L by 2 inches W by 2 inches H (152.4 by 50.8 by 50.8
08 74 00-21
mm).
2.
Bolt: Solid Stainless Steel 0.625 inch diameter by 0.5 inch throw (15.9 by 12.7 mm).
3.
Dual Voltage Coil: 0.9 Amp at 12 VDC continuous, 0.45 Amp at 24 VDC continuous.
** NOTE TO SPECIFIER ** Delete product not required.
4.
Product: Model 180ALI - Surface mount bolt lock, left hand, failsafe, with auto relock.
5.
Product: Model 180ARI - Surface mount bolt lock, right hand, failsafe, with auto
relock.
6.
Product: Model 180ALRI - Top Jamb bolt lock, left hand reverse, failsafe, with auto
relock.
7.
Product: Model 180ARRI - Top Jamb bolt lock, right hand reverse, failsafe, with auto
relock.
8.
Product: Model 280LH - Surface mount bolt lock, left hand, or top jamb mount right
hand reverse, failsecure less auto relock. Note - will not unlock without power.
9.
Product: Model 280RH - Surface mount bolt lock, right hand, or top jamb mount, left
hand reverse, failsecure less auto relock. Note - Will not unlock without power.
** NOTE TO SPECIFIER ** Delete finish not required.
10.
Finish: V - 628 Aluminum.
11.
Finish: Y - 335 Black.
** NOTE TO SPECIFIER ** Delete options not required.
12.
Provide D - Door position sensor SPDT.
13.
Provide B - Bolt lock position sensor.
14.
Provide BR64XL - Rectifier for AC operation.
** NOTE TO SPECIFIER ** The SDC GL160 and GL260 series electromechanical GateLoks are
designed to provide access control and remote locking and unlocking capability for manual or
automatic chain link, tubular steel and wrought iron sliding or swinging gates.
F.
Gate Lock: Gate locks shall be designed for a 3 inches (76mm) fence post and 2 inches
(51mm) gate post and shall be adaptable to smaller sizes.12/24 VDC 900/450 mA.
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model GL160AI - Failsafe gate lock, 12/24VDC.
a.
Operation: The GL160A GateLok shall be unlocked by an access control and
remote control. While handing is required they are field reversible.
2.
Product: Model GL163AI - Failsafe gate lock, built-in keyswitch 12/24VDC.
a.
Operation: The GL163A GateLok shall be unlocked by an access control,
remote control and built-in keyswitch. Handing is required and they are not field
reversible.
3.
Product: Model GL260AH - Failsecure gate lock 12/24VDC.
a.
Operation: The GL260A GateLok shall be unlocked by an access control and
remote control. While handing is required they are field reversible.
b.
Caution- Will not unlock with power outage.
4.
Product: Model GL263AH - Failsecure gate lock, built-in keyswitch, 12/24VDC.
(Mortise cylinder by others)
a.
Operation: The GL263A GateLok may be unlocked by an access control,
remote control and built-in key switch. The key switch is for momentary
electrical override and does not maintain a sustained unlocked mode. Handing
is required and the lock is not field reversible.
b.
Caution - Will not unlock during power outage.
5.
Product: Model GL260MRAH - Failsecure gate lock, mechanical key release,
12/24VDC.
a.
Operation: The GL260MRA GateLok may be unlocked by an access control,
remote control and mechanical key release. The mechanical key is for
momentary override and does not maintain a sustained unlocked mode. The
mechanical key retracts the bolt even during power outage. While handing is
required they are field reversible.
6.
Size: 5 inches W by 6.5 inches H by 2 inches D (127 by 16.5 by 50.8 mm).
08 74 00-22
7.
8.
9.
Material: 0.125 (3.2 mm) steel.
Bolt: 0.625 inch diameter by 0.625 inch throw (15.9 mm by 15.9 mm).
Key Cylinder: ANSI 1.125 inches or 1.250 inches. Standard or interchangeable core
mortise key cylinder. Provided by others.
10.
Adjustable Auto Relock Switch keeps the bolt retracted until the gate is in the closed
position.
11.
Mortise key cylinder provided by others.
** NOTE TO SPECIFIER ** Delete options not required.
12.
Provide D - Gate position sensor SPDT, 10 Amp at 30 VDC.
13.
Provide B - Bolt lock position sensor, 10 Amp at 30 VDC.
14.
Provide BR64XL - Rectifier for AC operation.
2.16 MAGNETIC LOCKS AND GATE LOCKS
A.
Electromagnetic Locks, Surface Mount:
1.
ANSI Grade 1 (1650 lb (748 Kg) holding force). 12/24 VDC (700 mA/350 mA).
** NOTE TO SPECIFIER ** Delete model not required.
a.
Single Door: Model 1511 EMLock as manufactured by SDC Security Door
Controls.
b.
Double Door: Model 1512 EMLock as manufactured by SDC Security Door
Controls.
c.
Double Door/Single lock, spilt armature: Model 1513 EMLock as manufactured
by SDC Security Door Controls.
2.
ANSI Grade 1 (1200 lb (544 Kg) holding force). 12/24 VDC (250 mA/125 mA).
** NOTE TO SPECIFIER ** Delete model not required.
a.
Single Door: Model 1571 EMLock as manufactured by SDC Security Door
Controls.
b.
Double Door: Model 1572 EMLock as manufactured by SDC Security Door
Controls.
c.
Double Door/Single lock, spilt armature: Model 1573 EMLock as manufactured
by SDC Security Door Controls.
3.
ANSI Grade 1 (650 lb (295 Kg) holding force). 12/24 VDC (440 mA/220 mA).
** NOTE TO SPECIFIER ** Delete model not required.
a.
Single Door: Model 1581 EMLock as manufactured by SDC Security Door
Controls.
b.
Double Door: Model 1582 EMLock as manufactured by SDC Security Door
Controls.
** NOTE TO SPECIFIER ** Delete if not required.
4.
Provide Universal adjustable glass door bracket. (Not for 1513 or 1573).
a.
HDB1 - Single glass door bracket
b.
HDB2 - Double glass door bracket
** NOTE TO SPECIFIER ** Delete if not required.
5.
Provide Adjustable universal top jamb bracket. (Not for 1513 or 1573).
a.
TJI - Single bracket, 1511, 1571
b.
TJ2 - Double bracket, 1512,1572
c.
TJ81 - Single Bracket, 1581
d.
TJ82 - Double bracket, 1582
** NOTE TO SPECIFIER ** Finish V is standard. Delete finish not required. Plated finishes are
special order.
6.
Finish: V - 628 Aluminum.
7.
Finish: X - Dark Bronze powder coat (313/613 equal).
8.
Finish: Y - 335 Black Anodized.
9.
Plated Finish: Q - 626 Dull Chrome.
10.
Plated Finish: C - 605 Bright Brass Powder coat.
08 74 00-23
11.
Plated Finish: D - 606 Dull Brass Powder coat.
12.
Plated Finish: P - 625 Bright Chrome.
** NOTE TO SPECIFIER ** Monitoring and Timer Options. Multiple options possible. Delete options
not required.
13.
Provide A - Anti-tamper Sensor: Indicates access cover removal. SPDT Dry, 1 Amp at
30VDC.
14.
Provide D - Door position sensor. (Not applicable for 1513, 1573).
15.
Provide B - Magnetic bond sensor. (Not applicable for 1513, 1573).
16.
Provide T - Adjustable 1-30 sec. timer. (Not applicable for 1581, 1582).
17.
Provide L - Bi-Color LED.
** NOTE TO SPECIFIER ** Refer to manufacturer's literature. Delete mounting options not
required.
18.
Housing: Architectural housing. (1510 and 1570 EmLocks).
19.
Bracket: Header mounting bracket.
20.
Bracket: Universal and concrete mounting brackets.
a.
UF11, or UF12, or UF81, or UF82.
21.
Bracket: AR Armature mounting bracket.
a.
AR11Y - Single 1511 or 1571. Black.
b.
AR11YD - Single 1511 or 1571 with DPS. Black.
22.
Brackets: Filler plates - FP or Angle brackets - AB.
23.
Bracket: Door coordinator mounting brackets.
a.
DC-1 - Single for 1511 or 1571.
b.
DC-2 - Double for 1512 or 1572.
** NOTE TO SPECIFIER ** Gate EMLocks are compatible with manual and automatic, swinging and
sliding, tubular and iron gates. The floating armature design compensates for gate misalignment
with the electromagnet. Delete if not required.
B.
Electromagnetic Gate Lock:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model 1575 - Single EMLock with magnetic bond and door status sensors.
2.
Product: Model 1576 - Single EMLock face drilled mounting with magnetic bond and
door status sensors.
a.
Case shall be totally sealed in an epoxy filled stainless steel case. A threaded
conduit fitting shall ensure weather resistant protection of the wiring.
b.
Holding Force 1200 lb (544 Kg), Voltage Input: 450 mA at 12 VDC, 225 mA at
24 VDC. Bond Sensor Rating: 125 mA at 12/24 VDC.
** NOTE TO SPECIFIER ** Delete power source requirements not required.
3.
12 VDC and 24 VDC.
** NOTE TO SPECIFIER ** Delete accessory not required.
4.
Provide 1576-BK: Mounting bracket for 1576.
5.
Provide 1576-AB: Armature mounting bracket for 1576.
** NOTE TO SPECIFIER ** Delete accessory not required. For swinging gate or top jamb door
application
6.
Provide 1576-MP: Lock mounting plate for 1576.
7.
Provide 1576-ZB: Lock mounting Z bracket for 1576 (includes 1576-MP).
** NOTE TO SPECIFIER ** SDC's 1583 Micro Cabinet EMLock® is a compact specialized
electromagnetic lock that produces 300 lb (136 Kg) of holding force. Versatile mounting capability
with face drilled and surface mounting holes. The 1583 operating voltage is field selectable for
either 12/24 VDC. Aluminum housing is standard. Not recommended for life safety applications on
pedestrian doors. Delete if not required.
C.
Electromagnetic Micro Cabinet Lock:
1.
Product: Model 1583 - Cabinet EMLock as manufactured by SDC Security Door
Controls.
08 74 00-24
a.
300 lb (136 Kg) of holding force.
b.
An electronics module shall provide spike and surge protection.
c.
Dual voltage: 500/250 mA @ 12/24 VDC.
** NOTE TO SPECIFIER ** The 1590 EMLock® is ideal for securing sliding or swinging, manual or
automatic doors.
D.
Electromagnetic Mortise Lock:
1.
Product: Model 1591U - Single EMLock for sliding doors in stainless steel finish as
manufactured by SDC.
a.
Holding Power: 850 lb (386 Kg).
b.
Electrical Data: .40 AMP at 24VDC, 80 AMP at 12VDC.
** NOTE TO SPECIFIER ** Delete accessories not required.
2.
Provide LAB - Surface mount armature angle bracket for 1591 on sliding doors.
3.
Provide AMP - Armature mounting plate for leading edge of door
4.
Provide DPS - Door position sensor for 1591 EMLock.
E.
Electromagnetic Narrow Line EMLock - Low profile Single and Double EMLocks
1.
Product 350V - Single EMLock as manufactured by Security Door Controls
a.
Holding Force: 1200 lb (544 kg).
b.
Electrical Data: 300 mA/540mA @ 24VDC/12VDC.
c.
Bond sensor and Door sensor - Standard.
d.
12-1/2 inches L x 2-1/8 inches H x 1-11/16 inches D (318 mm x 54 mm x 43
mm).
2.
Product 352V - Double EMLock as manufactured by Security Door Controls
a.
Holding Force: 1200 lb (544 kg) per door leaf.
b.
Electrical Data: 600mA/1080mA @ 24VDC/12VDC
c.
Bond sensor and Door sensor standard
d.
25 inches L x 2-1/8 inches H x 1-11/16 inches D (635 mm x 54 mm x 43 mm).
F.
Excel Value Engineered Series:
1.
Product E1200 as manufactured by Security Door Controls:
a.
Holding Force: 1200lb (544 kg).
b.
Electrical Data: 250mA/500mA @24VDC/12VDC.
c.
Bond sensor, Door status and LED standard.
2.
Product E600 as manufactured by Security Door Controls:
a.
Holding force: 600lb (272 kg).
b.
Electrical Data: 250 mA/500mA @ 24VDC/12VDC.
c.
Bond sensor, Door status and LED standard.
2.17 MAGNETIC SHEAR LOCKS
A.
Electromagnetic Shear Lock:
1.
The electromagnetic lock shall incorporates a "floating" armature assembly and
hardened alloy steel locking "tabs" on both the lock and armature assemblies, that
allow adjustment both vertically and laterally to compensate for wide door gaps and
warped or misaligned doors.
2.
Static sensor activates lock only when door is aligned and at rest.
3.
Automatic sensing 12/24 VDC input.
** NOTE TO SPECIFIER ** Delete product not required. Finish not required for 1561, 1562, 1565,
1566
4.
Product: Concealed 2000 lb (907 Kg) Holding Force with Integrated Electronics:
Model 1561 Hi/Shear EMLock as manufactured by SDC Security Door Controls.
5.
Product: Concealed 2000 lb (907 Kg) Holding Force with External Electronics: Model
1562 Hi/Shear EMLock as manufactured by SDC Security Door Controls.
6.
Product: Concealed 2700 lb (1225 Kg) Holding Force with Integrated Electronics:
Model 1565 Hi/Shear EMLock as manufactured by SDC Security Door Controls.
08 74 00-25
7.
Product: Concealed 2700 lb (1225 Kg) Holding Force with External Electronics: Model
1566 Hi/Shear EMLock as manufactured by SDC Security Door Controls.
8.
Product: Surface Mount 2000 lb (907 Kg) Holding Force with Integrated Electronics:
Model 1561S Hi/Shear EMLock as manufactured by SDC Security Door Controls.
9.
Product: Surface Top Jamb Mount 2000 lb (907 Kg) Holding Force with Integrated
Electronics: Model 1561TJ Hi/Shear EMLock for in-swing doors as manufactured by
SDC Security Door Controls.
10.
Product: Semi-Concealed 2000 lb (907 Kg) Holding Force with External Electronics:
Model 1562SC Hi/Shear EMLock as manufactured by SDC Security Door Controls.
11.
Product: Semi-Concealed 2000 lb (907 Kg) Holding Force for Herculite doors with
External Electronics: Model 1562SCHDB Hi/Shear EMLock as manufactured by SDC
Security Door Controls.
a.
1/2 inch glass (13mm).
b.
3/4 inch glass (19mm).
12.
Provide armature and mounting kit as indicated or required for frame material and
profile. Verify push or pull side if not indicated. Provide installation on secure side of
opening (typical).
** NOTE TO SPECIFIER ** Finish V is standard for 1561S, 1561TJ, 1562SC and 1562SCHDB. Delete
finish not required. Plated finishes are special order.
13.
Finish: V - 628 Aluminum.
14.
Finish: X - Dark Bronze powder coat (313/613 equal).
15.
Finish: Y - 335 Black Anodized.
16.
Plated Finish: Q - 626 Dull Chrome.
17.
Plated Finish: C - 605 Bright Brass. Powder coat.
18.
Plated Finish: D - 606 Dull Brass. Powder coat.
19.
Plated Finish: P - 625 Bright Chrome.
** NOTE TO SPECIFIER ** Optional. Delete accessory not required.
20.
Provide B - Bond sensor indicates proper armature contact or reduced holding power
due to improper armature contact or tampering. SPDT 0.25Amp (not available on
1562/1566).
21.
Provide D - Door position switch indicates door open or closed. SPDT 0.25 Amp
maximum.
22.
Provide L-3 - External LED status indicator, mounts separately through the frame and
may be used to indicate lock is energized or wired to bond sensor for door status.
2.18 DELAYED EGRESS LOCKS
A.
Delayed Egress Locks, Integrated:
1.
Operation: When unauthorized egress is initiated, delayed egress lock delays egress
through the door for 15 or 30 seconds. Meanwhile, the person exiting must wait while
personnel or security respond. The door unlocks after 15 seconds have elapsed,
permitting egress. A signal from the fire life safety system will release the lock for
uninhibited egress in an emergency. 30 second delay available where approved.
** NOTE TO SPECIFIER ** Delete product not required.
2.
Product: Model 1511S - Single Exit Check Integrated Delayed Egress Lock as
manufactured by SDC Security Door Controls.
3.
Product: Model 1511T - Tandem Exit Check Integrated Delayed Egress Lock as
manufactured by SDC Security Door Controls.
a.
1511S - 1650 lb (748 Kg) of holding force, dual coil 830/450 mA at 12/24 VDC
operation.
b.
1511T - (2X) 1650 lb (748 Kg) holding force, dual coil 1500/850 mA at 12/24
VDC operation.
c.
Activated by door movement or sense bar unlock delay and nuisance delay per
code specification.
d.
Emergency release input, Mode status outputs, Digital countdown display,
08 74 00-26
Selectable voice or tone warning.
Product: Model 1511SE - Energy Saver Single Exit Check Integrated Delayed Egress
Lock as manufactured by SDC Security Door Controls.
a.
1200 lb (544 kg) holding force, dual coil, 400/275 mA at 12/24VDC operation
5.
Product: Model 1511TE - Energy Saver Tandem Exit Check Integrated Delayed
Egress Lock as manufactured by SDC Security Door Controls.
a.
1511TE - (2X) 1200 lb (544 Kg) holding force, dual coil 650/400 mA at 12/24
VDC operation.
b.
Activated by door movement or sense bar unlock delay, nuisance delay per
code specification.
c.
Emergency release input, Mode status outputs, Digital countdown display,
Selectable voice or tone warning.
** NOTE TO SPECIFIER ** Delete code compliant operation not required.
6.
Operation: NA - NFPA, UBC, IBC, IFC. (1 or 2 sec Nuisance. 15 or 30 sec Delay).
7.
Operation ND - NFPA, UBC, IFC, IBC, SBC. (0/1 sec Nuisance. 15 sec Fixed Delay).
8.
Operation NH - NFPA, UBC, IFC, IBC, SBC. (0/1 sec Nuisance. 30 sec Fixed Delay).
9.
Operation NC - NFPA, UBC, IFC, IBC, SBC, CBC OSPHD. (0/1 sec Nuisance. 15 sec
Fixed Delay. Manual Reset).
10.
Operation BC - BOCA and Chicago Code. (0 sec Nuisance. 15 sec fixed Delay. 30
sec Relock).
11.
Operation BH - BOCA Code. (0/1 sec Nuisance. 30 sec fixed Delay. 30 sec Relock).
12.
Operation: BD - BOCA Code. 0/1 sec Nuisance. 15 sec fixed Delay. 30 sec Relock).
13.
Reset and Control:
** NOTE TO SPECIFIER ** Delete option not required.
a.
Provide K - Built-in Key switch for Reset & Bypass (Std).
b.
Provide P - Push switch for Reset only.
c.
Provide L - Less Key or Push switch.
** NOTE TO SPECIFIER ** Finish V is standard. Delete finish not required. Plated finishes are
special order.
14.
Finish: V - 628 Aluminum.
15.
Finish: X - Dark Bronze powder coat (313/613 equal).
16.
Finish: Y - 335 Black Anodized.
17.
Plated Finish: Q - 626 Dull Chrome.
18.
Plated Finish: C - 605 Bright Brass. Powder coat.
19.
Plated Finish: D - 606 Dull Brass. Powder coat.
20.
Plated Finish: P - 625 Bright Chrome.
** NOTE TO SPECIFIER ** Delete options not required. Options D, B, & A specify two for tandem.
21.
Options: E - Energy Saver. 1200 lbs holding force, low power consumption.
22.
Options: D - Door Position Status. Provides remote monitoring.
23.
Options: B - Magnetic Bond Alert Sensor.
24.
Options: A - Anti-tamper Switch. Detects attempt to remove the access cover.
25.
Options: VI - One Language or Bilingual - Spanish, English and Spanish, English and
French verbal notification.
26.
Options: 101-SP - External 15 Watt Speaker.
** NOTE TO SPECIFIER ** The Mini Exit Check® is designed to meet the needs of long term care
and commercial facilities that require a smaller, less obtrusive, and less expensive delayed egress
lock that is better suited for minimum security needs. In addition, the subdued alarm tone is less
disruptive to patients and staff. SDC has also maintained all the features and status outputs found
in most higher holding force delayed egress locks on the market.
4.
B.
Mini Delayed Egress Lock, Integrated:
1.
650 lb (748 Kg) holding force exit delay and nuisance delay per code specification,
subdued alarm, two tones Code compliant Manual or auto power-up modes.
** NOTE TO SPECIFIER ** Specify 2 units for double doors
08 74 00-27
2.
Product: Model 1581S - Mini Delayed Egress lock 650lbs. holding force as
manufactured by SDC. Provide 2 units for double doors and required cable.
** NOTE TO SPECIFIER ** Delete operation not required.
3.
Operation: ND - IBC, IFC, NFPA 101, NFPA 1-UFC, UBC, SBC Compliant. 15 second
fixed exit delay, 1 second nuisance delay.
4.
Operation: NH - IBC, IFC, NFPA 101, NFPA 1 - UFC, SBC Compliant. 30 second
fixed exit delay, 1 second nuisance delay.
5.
Operation: NC - IBC, IFC, California Building Code/OSHPD, NFPA 101, NFPA 1UFC, UBC, SBC Compliant. 15 second fixed exit delay, 1 second nuisance delay,
manual power up
6.
BD - BOCA National Building Code Compliant. 15 second fixed exit delay, 1 second
nuisance delay, auto reset 30 seconds after door closure.
7.
BC - BOCA Chicago Code Compliant. 15 second fixed exit delay, 0 second nuisance
delay, auto reset 30 seconds after door closure.
8.
BH - BOCA National Building Code Compliant. 30 second fixed exit delay, 1 second
nuisance delay, auto reset 30 seconds after door closure.
** NOTE TO SPECIFIER ** Finish V is standard. Delete finish not required. Plated finishes are
special order.
9.
Finish: V - 628 Aluminum.
10.
Finish: X - Dark Bronze powder coat (313/613 equal).
11.
Finish: Y - 335 Black Anodized.
12.
Plated Finish: Q - 626 Dull Chrome.
13.
Plated Finish: C - 605 Bright Brass. Powder coat.
14.
Plated Finish: D - 606 Dull Brass. Powder coat.
15.
Plated Finish: P - 625 Bright Chrome.
** NOTE TO SPECIFIER ** Delete accessory not required.
16.
Provide D - Door Position Status. Provides remote monitoring.
17.
Provide B - Magnetic Bond Alert Sensor.
18.
Provide 1581S-TC3 - 3 ft Tandem cable.
19.
Provide 1581S-TC10 - 10 ft Tandem cable.
** NOTE TO SPECIFIER ** Designed for low to medium security applications, Exit Check benefits
include: Use of smaller or less obtrusive electro-magnetic locks; direct eye contact with egress
status annunciation and easy to reach controls for alarm reset, sustained bypass and momentary
bypass functions. Delete if not required.
C.
Delayed Egress Controller:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model 101-DE - Wall mount controller with keypad control and reset as
manufactured by SDC Security Door Controls.
2.
Product: Model 101-KDE - Wall mount controller with both keypad and key switch
control and reset (less cylinder) as manufactured by SDC Security Door Controls.
a.
Inputs: Voltage input: Auto sensing 12/24 VDC; Reset input: NO, Dry; REX
input: NO, Dry; Trigger: N.C or N.O., dry.
b.
Monitoring Outputs: Alarm Output: 1 Amp at 30 VDC SPDT, dry; Locked
Output: 1 Amp at 30 VDC SPDT, dry.
** NOTE TO SPECIFIER ** Delete operation not required.
c.
Operation: NA - NFPA, UBC, IBC, IFC,. (1 or 2 sec Nuisance. 15 or 30 sec
Delay)
d.
Operation ND - NFPA,, UBC, IFC, IBC, SBC. (0/1 sec Nuisance. 15 sec Fixed
Delay)
e.
Operation NH - NFPA,, UBC, IFC, IBC, SBC. (0/1 sec Nuisance. 30 sec Fixed
Delay)
f.
Operation NC - NFPA,, UBC, IFC, IBC, SBC, CBC OSPHD. (0/1 sec Nuisance.
15 sec Fixed Delay. Manual Reset)
08 74 00-28
g.
Operation BC - BOCA and Chicago Code. (0 sec Nuisance. 15 sec fixed Delay.
30 sec Relock)
h.
Operation BH - BOCA Code. (0/1 sec Nuisance. 30 sec fixed Delay. 30 sec
Relock)
i.
Operation: BD - BOCA Code. 0/1 sec Nuisance. 15 sec fixed Delay. 30 sec
Relock)
** NOTE TO SPECIFIER ** Delete finish not required for EMlock.
3.
Finish: V - 628 Aluminum.
4.
Finish: X - Dark Bronze powder coat (313/613 equal).
5.
Finish: Y - 335 Black Anodized.
** NOTE TO SPECIFIER ** Specify EMlock to be used
6.
Provide 1511DEV - Single, 1650lbs with trigger.
7.
Provide 1571DEV - Single, 1200lbs with trigger.
8.
Provide 1581DEV - Single, 650lbs with trigger.
9.
Provide 1575DEU - Outdoor with trigger.
10.
Provide 1576DEU - Outdoor face drilled with trigger.
11.
Provide 1576DE-ZB - Inswing mounting bracket for 1576DEU.
** NOTE TO SPECIFIER ** Delete options not required. Specify two for tandem operation of
options D, B.
12.
Provide D - Door Position Status. Provides remote monitoring.(DPS not available with
1581, 1575, 1576).
13.
Provide B - Magnetic Bond Alert Sensor.
14.
Provide VI - One Language or Bilingual - Spanish, or English and Spanish, or English
and French verbal notification.
D.
Annunciators:
** NOTE TO SPECIFIER ** Compatible with all Exit Check systems, the 101 series annunciators
provide door status at a remote location such as a nurse's station, guard station or office. The tricolor LED provides precise delay mode status.
1.
Annunciator:
a.
Faceplate: 20 gauge stainless steel.
b.
Key Switch: 6 Amp at 30 VDC maximum.
c.
Push Switch: 5 Amp at 30 VDC maximum.
d.
LED: Tri-color, 20 mA at 12/24VDC. Green - Secure, Amber - Alarm/door
locked, Red - Alarm/door unlocked.
** NOTE TO SPECIFIER ** Delete product not required.
2.
Product: Annunciator Model 101-1A - Single Door Annunciator as manufactured by
SDC Security Door Controls:
a.
Audible alarm.
b.
Tri-color LED status indicator.
3.
Product: Annunciator Model 101-4AM - Four Door Annunciator as manufactured by
SDC Security Door Controls:
a.
Audible alarm.
b.
Alarm mute switch.
c.
Four tri-color LED status indicators.
4.
Product: Annunciator Model 101-1AK - Single Door Annunciator with Key Control as
manufactured by SDC Security Door Controls:
a.
Dual function key switch for bypass (on/off) and reset. Key cylinder not
included.
b.
Audible alarm.
c.
Tri-color LED status indicator.
d.
Application required adjacent to the door.
5.
Product: Annunciator Model 101-PAM - Single Door Annunciator with Push Switch
Control as manufactured by SDC Security Door Controls:
a.
Three push switches: momentary access, bypass (on/off) and audible mute.
08 74 00-29
b.
Audible alarm.
c.
Tri-color LED status indicator.
6.
Product: Model 101-SP - External 15 watt speaker connects directly to 1511S or
1511T for enhanced decibels of onsite or remote voice message annunciation.
Speaker driver may be provided by others for extreme decibel requirements.
7.
Product: Model 101-SPSN - External speaker and piezo sounder connects directly to
101-DE or 101-KDE. Duplicates ExitCheck voice message and alarm.
NOTE TO SPECIFIER ** Used in lieu of the standard built-in reset and bypass, the wall mount
controls provide a more accessible method of reset and bypass using the existing facility key
system. All reset controls must be located adjacent to the door. (Key cylinder not included).
Delete if not required. Refer to manufacturer's literature for other models and options.
E.
Local Reset and Bypass:
1.
Faceplate: 20 gauge stainless steel.
2.
Key Switch: 6 Amp at 30 VDC maximum.
3.
Push Switch: 5 Amp at 30 VDC maximum.
4.
All reset controls shall be located adjacent to the door. (Key cylinder not included).
** NOTE TO SPECIFIER ** Delete product not required.
5.
Product: Reset/Bypass Model 708R - On/Off Bypass and Reset Key Switch as
manufactured by SDC Security Door Controls:
a.
Left - SPDT, maintained contact for bypass (on/off).
b.
Right - SPDT, momentary contact for lock/alarm reset.
6.
Product: Reset/Bypass Model 707R - Momentary Bypass and Reset Key Switch as
manufactured by SDC Security Door Controls:
a.
Left - SPDT, momentary contact for bypass (on/off).
b.
Right - SPDT, momentary for bypass (on/off).
7.
Product: Reset/Bypass Model 702R - Lock/Alarm Reset Key Switch as manufactured
by SDC Security Door Controls:
a.
SPDT, momentary contact for lock/alarm reset.
8.
Product: Reset/Bypass Model 918 - Keyless Keypad Reset and Bypass or Momentary
Authorized Access 500 User Codes.
9.
Product: Reset/Bypass Model 920 - Keyless Keypad Reset and Bypass or Momentary
Authorized Access 500 User Codes.
2.19 EXIT SENSE BARS AND SWITCH BARS
** NOTE TO SPECIFIER ** Non-Latching Push Bar for: Magnetic Lock Release; Access Control
Request-to-Exit; Delayed Egress Trigger; Alarm Shunt; CCTV or Alarm Activation. Delete if not
required.
A.
Exit Sense Bar:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model PSB560 - Pressure Sensitive Exit Bar as manufactured by SDC
Security Door Controls.
2.
Product: Model MSB550 - Mechanical Switch Exit Bar as manufactured by SDC
Security Door Controls.
3.
Activation Force: Factory Set: 5 lb (2.2 Kg). Field adjustable to 15 lb (6.8 Kg).
4.
Armored control wire loop PT-2U included.
5.
Height: 2.375 inches (60.3 mm).
6.
Depth: 1.875 inches (47.6 mm).
7.
Voltage Input: 12/24 VDC Voltage sensing. No field adjustment.
8.
Current: 20 mA at rest, 115 mA active.
9.
Operating Temp: 0 degree F to 150 degree F (-18 degree C to 65 degree C).
** NOTE TO SPECIFIER ** One contact standard for MSB550 and two contacts optional. Two
contacts standard for PSB560. Delete contact requirement not required.
10.
Output: One SPDT Dry contacts.
08 74 00-30
11.
Output: Two SPDT Dry contacts.
** NOTE TO SPECIFIER ** 36 inches (914 mm) Standard. May be field cut to length. Delete length
not required.
12.
Width: 36 inches (914 mm).
13.
Width: 42 inches (1067mm).
14.
Width: 48 inches (1219 mm).
** NOTE TO SPECIFIER ** Options: Delete option not required.
15.
Provide 500GL-KIT - Glass mounting kit for full glass and herculite doors with stiles. 2
mounting blocks and adhesive for 8 doors.
16.
Provide 500GL-MB - Additional mounting blocks (2).
17.
Provide 500-SK - Shim kit used to raise bar from door surface. Recommended for
wood or hollow metal doors.
** NOTE TO SPECIFIER ** Finish: V - standard for PSB/MSB. Delete finish not required.
18.
Finish: V - 628 Aluminum anodized.
19.
Finish: S - 629 Bright stainless steel.
20.
Finish: U - 630 Brushed stainless steel.
21.
Finish: C - 605 Bright brass.
22.
Finish: Y - 335 Black anodized.
2.20 EXIT DEVICE SWITCH
A.
Product: 500 Series Exit Device REX Switch as manufactured by SDC Security Door
Controls.
1.
Switch shall be field installed in the inactive hinge pad of an exit device to provide
instantaneous release of magnetic locks for egress. Device shall include a SPDT
Switch Assembly with wire leads. 5 Amp @ 30VDC.
2.21 POWER SUPPLIES AND DOOR CONTROL MODULES
A.
1 Amp Power Supply:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product as manufactured by SDC Security Door Controls.
2.
Product: Model 621B - Power supply module Only, 1 Amp 12/24VDC, Class 2 Input
requirements: 40VA at 24VAC.
** NOTE TO SPECIFIER ** Delete option if not required.
a.
Provide TP2440 24VAC, 40VA transformer. UL Listed.
3.
Product: Model 621P - Power supply module, 1 Amp, 12/24VDC, Class 2 with UL
Listed plug-in transformer.
4.
Product: Model 621PJ - Power supply module, 1 Amp, 12/24VDC, Class 2 with UL
Listed plug-in transformer and small enclosure.
5.
12VDC or 24VDC field selectable output.
6.
1 Amp maximum, filtered and regulated output: 1 power limited switched output, 1
power limited auxiliary output.
7.
Two control inputs: 1 trigger input, normally open (NO), 1 supervised emergency
release input (latching with reset or non-latching).
8.
When latching emergency release is selected and the switched output is deactivated
by emergency release or power loss, power is restored by manual means only.
9.
Short circuit and thermal overload protection.
10.
Battery charger output.
11.
Automatically switched to battery back-up when AC fails. Provide battery back-up.
12.
Board equipped with AC input, DC output and battery status LED indicator.
13.
Enclosure equipped with AC input, DC output and battery status LED indicator.
B.
1.0 Amp Class 2 Access Control Power Supply:
1.
Product: Model 602RF - 1.0 Amp Power Supply as manufactured by SDC Security
08 74 00-31
2.
3.
4.
5.
6.
Door Controls.
12/24 VDC field selectable.
Emergency release input with manual reset capability.
Low battery disconnect.
Input, output and battery status.
Battery charger (Batteries not included)
C.
1.5 Amp Class 2 Access Control Power Supply:
1.
Product: Model 631RF - 1.5 Amp Power Supply as manufactured by SDC Security
Door Controls.
2.
Product Model 631RFA - 1.5 Amp Power supply, large J-Box (16"x14"x6")
3.
12/24 VDC field selectable.
4.
Emergency release input with manual reset capability.
5.
Low battery disconnect.
6.
Input, output and battery status.
7.
Battery charger (Batteries not included)
** NOTE TO SPECIFIER ** 2 FB4 modules possible to supply 8 fused outputs. Delete if not
required.
8.
Provide 2 door control modules or FB4 with 4 fused outputs.
9.
Provide battery backup - One, two or four pieces of RB12V4
D.
2 Amp Class 2 Power Supply:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model 632RF - 2 Amp Power Supply as manufactured by SDC Security Door
Controls.
2.
Product Model 632RFA - 2 Amp Power supply, Large J-Box (16 inches x 14 inches x
6 inches).
3.
12/24 VDC field selectable.
4.
Emergency release input with manual reset capability.
5.
Low battery disconnect.
6.
Input, output and battery status.
7.
Battery charger (Batteries not included).
** NOTE TO SPECIFIER ** Delete if not required.
8.
Provide 2 door control modules or FB4 with 4 fused outputs.
9.
Provide battery backup - one, two, or four pieces of RB12V4
E.
4 Amp Class 2 Power Supply:
1.
Product: Model 634RF 4 Amp Power Supply as manufactured by SDC Security Door
Controls.
2.
(1) 4A output and (2) 2A outputs.
3.
Field selectable 12/24 VDC.
4.
Emergency release input with field selectable manual reset.
5.
Low battery disconnect.
6.
Input, output and battery status.
7.
Battery charger (Batteries not included).
8.
Large cabinet: 16 inches W by 14 inches H by 6 inches D.
** NOTE TO SPECIFIER ** Specify up to (4) FB4 for (16) outputs. Delete if not required.
9.
FB4 - 4 fused outputs.
10.
Provide battery backup - One, two, four, six pieces of RB12V7
F.
6 Amp Class 2 Power Supply:
1.
Product: Model 636RF 6 Amp Power Supply as manufactured by SDC Security Door
Controls.
2.
(1) 6A output and (3) 2A outputs.
3.
Field selectable 12/24 VDC.
08 74 00-32
4.
5.
6.
7.
8.
Emergency release input with field selectable manual reset.
Low battery disconnect.
Input, output and battery status.
Battery charger (Batteries not included).
Large cabinet: 16 inches W by 14 inches H by 6 inches D (406 mm by 356 mm by 152
mm).
** NOTE TO SPECIFIER ** Optional. Specify up to (4) FB4 for (16) outputs. Delete if not required.
9.
FB4 - 4 fused outputs.
10.
Provide battery backup - One, two, four, six pieces of RB12V7.
** NOTE TO SPECIFIER ** Power Supply Options. Delete options not required.
11.
KL - Key Lock for J-Box cover.
12.
MR-1 - Manual Reset Button.
13.
PS-1 - On/Off Push switch inside J-Box.
14.
PS-2 - On/Off Push switch on J-Box cover.
15.
PC- 6 foot power cord (Not for 634RF or 636RF).
16.
220VAC- 220VAC input voltage.
G.
Universal Door Control Modules: 7 field selectable modes: standard relay, timer, latch, or
latch plus timer and 3 mantraps modes.
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model UR2-4 - 2 Station Controller as manufactured by SDC Security Door
Controls. Field selectable CR, TD, LR, TD/LR, Interlock A, Mantrap B , Interlock C.
a.
4 inputs, 2 fused outputs.
b.
4 aux inputs, 2 aux outputs.
2.
Product: Model UR4-8 - 4 Station Controller as manufactured by SDC Security Door
Controls. . Field selectable CR, TD, LR, TD/LR, Interlock A, Mantrap B , Interlock C.
a.
8 inputs, 4 fused outputs.
b.
4 aux inputs, 4 aux outputs.
3.
Power Supply Capacity: 631RFA- 1 maximum. 634/636RF - 2 maximum.
H.
Door Control Modules:
1.
Modules with or without power supplies as scheduled or required.
** NOTE TO SPECIFIER ** Delete product not required.
2.
Product as manufactured by SDC Security Door Controls.
3.
Product: Model FB-4 - Fused terminal board. 4 individually fused outputs.
4.
Product: UR-1 - Single Universal Relay module field selectable for: CR, or 2CR, or TD
(1-60 sec), or 2TD, or LR, or 2LR, or Interlock A or sequencer. Inputs - 2 Form A
SPST NO. Outputs - 2 form C SPDT 5 amp @ 12/24vdc.
5.
Product: Model ACM-1 - Access Control Module. One SPDT voltage output, one
SPDT status output, eight trigger inputs, (4N/C, 4N/O), LED status indicator.
6.
Product: Model CR4 - Control Board with four relays. Four fused SPDT field
selectable wet or dry outputs, four non-fused SPDT outputs, 2 Amps @ 30VDC, four
dry contact trigger inputs.
** NOTE TO SPECIFIER ** Delete power supplies not required.
7.
Provide Model PB-8 - Power booster for high inrush electric panic devices and locks.
1 Amp continuous @ 24VDC, 8 Amp surge output.
8.
Provide Model PB-16 - Power booster for high inrush electric panic devices and locks.
1 Amp continuous @ 24VDC, 16 Amp surge output.
9.
Provide PSM - Power supply monitor board. Two SPDT relays to monitor power
supply and battery status.
10.
Provide 12VR - Regulator module. Reduces 24VDC to 12VDC @ 500mA for keypad
or card reader.
I.
Exit Device Sequencer:
1.
Product as manufactured by SDC Security Door Controls.
08 74 00-33
2.
Product: Model EMC - Sequencer Module required for pair of doors and automatic
doors. 12/24 VDC. For use with SDC 602RF and 632RF Power Supplies.
2.22 TRANSFORMERS
A.
DC Transformers:
1.
Product as manufactured by SDC Security Door Controls.
** NOTE TO SPECIFIER ** Delete product not required.
2.
Product: Model TR12 Plug In. 120VAC primary, secondary screw terminals Output
Regulated 12VDC @ 1 Amp.
3.
Product: Model TR24 Plug-in. 120 VAC primary, secondary screw terminals. 24VDC,
1 Amp.
2.23 KEY SWITCHES
A.
Key Switches:
** NOTE TO SPECIFIER ** Delete faceplate not required.
1.
Single gang, wall mounted, anti-tamper recessed key cylinder:
a.
Product: Model 7XX (XX= Function 01 -13 below) - 20 ga. stainless steel. 2.875
inches by 4.5 inches by 20 Ga. (73 by 114 by 0.912 mm) as manufactured by
SDC Security Door Controls.
2.
Narrow 1.75 inches (44 mm) wide, frame mounted:
a.
Product: Model 7XXN (XX= Function 01 -13 below) - 20 ga. stainless steel.1.75
inches by 4.5 inches by 20 ga. (45 by 114 by 0.912 mm) as manufactured by
SDC Security Door Controls.
3.
Two gang faceplate provides for the use of a larger junction box to accommodate time
delays, audible annunciation and increased wiring.
a.
Product: Model 7XXT(XX= Function 01 -13 below) - 20 ga. stainless steel.4.5
inches by 4.5 inches by 20 Ga. (112 by 114 by 0.912 mm) as manufactured by
SDC Security Door Controls.
4.
Single gang, wall mounted:
a.
Product: Model 8XX (XX= Function 01 -13 below) - 0.25 inch (6 mm) anodized
aluminum. 3.25 inches by 5 inches by .25 inch D (83 by 127 by 6.35 mm) as
manufactured by SDC Security Door Controls.
5.
Narrow, 1.75 inches wide frame mounted. Four mounting screws.
a.
Product: Model 8XXN (XX= Function 01 -13 below) - 0.25 inch (6 mm)
anodized aluminum. 1.75 inches by 5 inches by .25 inches D (45 by 127x 6.35
mm) as manufactured by SDC Security Door Controls.
** NOTE TO SPECIFIER ** Functions available in both series and sizes unless noted. Delete
function not required.
6.
Function 01: Alternate action SPDT. Turning the key left or right actuates and latches
the contact. Contact position is maintained until the key is inserted and turned again.
7.
Function 02: Momentary SPDT. Turning the key left or right momentarily actuates the
contact.
** NOTE TO SPECIFIER ** 704 and 804AL only. Delete if not required.
8.
Function 04: Momentary SPDT plus 10TD Electronic Mini Timer SPDT 2 Amp at 30
VDC, adjustable 1 - 60 seconds. Turning the key left or right activates an
electronically timed contact for 1 - 60 seconds.
9.
Function 05: Alternate action DPDT. Turning the key left or right actuates and latches
the contact. Contact position is maintained until the key is inserted and turned again.
10.
Function 06: Momentary DPDT. Turning the key left or right momentarily actuates the
contacts.
11.
Function 07: #1 Momentary SPDT - Turning the key left momentarily actuates contact
#1. #2 Momentary SPDT - Turning the key right momentarily actuates contact #2.
12.
Function 08: #1 Momentary SPDT - Turning the key in one direction momentarily
08 74 00-34
actuates contact #1. #2 Alternate action SPDT - Turning the key in opposite direction
actuates and latches contact #2 until the key is inserted and turned again.
13.
Function 09: #1 Alternate action SPDT - Turning the key left actuates and latches
contact #1. #2 Alternate Action SPDT - Turning the key right actuates and latches
contact #2.
** NOTE TO SPECIFIER ** 710T only. Delete if not required.
14.
Function 10: #1 Momentary SPDT plus 10TD Electronic Mini Timer, SPDT 2Amp, 160 second - Turning the key in one direction activates an electronically timed contact
for 1 - 60 seconds. #2 Alternate action SPDT - Turning the key in opposite direction
actuates and latches contact #2.
15.
Function 11: #1 Momentary DPDT - Turning the key left momentarily actuates contact
#1. #2 Momentary DPDT - Turning the key right momentarily actuates contact #2.
16.
Function 12: #1 Momentary DPDT - Turning the key in one direction momentarily
actuates contact #1. #2 Alternate action DPDT - Turning the key opposite direction
actuates and latches contact #2 until the key is inserted and turned again.
17.
Function 13: #1 Alternate action DPDT - Turning the key left actuates and latches
contact #1. #2 alternate action DPDT - Turning the key right actuates and latches
contact #2.
** NOTE TO SPECIFIER ** Finish options for 700 series only. Finish: U 630 standard. Delete finish
not required. 800 series finish is only 628 - anodized aluminum.
18.
Finish: U 630 - Dull stainless steel.
19.
Finish: C 605 - Bright brass.
20.
Finish: D 606 - Dull brass.
21.
Finish: H 613 - Oil rubbed bronze.
22.
Finish: P 625 - Bright Chrome.
** NOTE TO SPECIFIER ** Delete options not required. L1R, L1G, L2, LT select only one
23.
Provide ATS - Anti-Tamper switch.
24.
Provide L1 - One LED; specify red or green.
25.
Provide L2 - Two LED's; red and green.
26.
Provide LT - One tri-color LED; red green and amber.
27.
Provide 10TD - Mini timer.
28.
Provide CYL-KD - Key cylinder with two keys.
** NOTE TO SPECIFIER ** Available with 700T only.
29.
Provide RMB - Buzzer. May be wired to sound when door is unlocked. 12 or 24VDC
operation.
** NOTE TO SPECIFIER ** Available with 700T only.
30.
Provide SN - 85 db siren, 3-28 VDC.
2.24 EXIT SWITCHES
A.
Exit Switches:
1.
Product as manufactured by SDC Security Door Controls.
** NOTE TO SPECIFIER ** 410 & 420 Series. Delete if not required.
2.
Illuminated switch button. The high impact resistant material resists abuse. The
"PUSH to EXIT" sign complies with NFPA requirements.
a.
Contact: SPDT, 5 Amp at 30 VDC.
b.
Timer: SPDT 2 Amp at 12/24 VDC.
c.
Wire Leads: 6 inches (152 mm), 20 Gauge.
d.
420 Series - Single gang box mounting
e.
410N Series - Narrow Mullion mounting
** NOTE TO SPECIFIER ** Available product for function indicated. Delete model function not
required.
f.
Product: Model 422/412N - Momentary SPDT (PUSH TO EXIT).
g.
Product: Model 423/413N - Integrated electronic timer, adjustable 1-60 sec,
08 74 00-35
12/24 VDC, DPDT 2 Amp contact (PUSH TO EXIT).
Product: Model 423P/413PN - Integrated pneumatic timer, adjustable 1-180
sec. 12/24 VDC, DPST 3 Amp contact (PUSH TO EXIT).
i.
Product: Model 424/414N - Momentary DPDT (PUSH TO EXIT).
j.
Product: Model 425/415N - AA (On/Off) DPDT (No Sign).
k.
Product: Model 422A - Momentary SPDT. 2 inches Button - Blue ADA
Illuminated button only.
l.
Product: Model 423A - Integrated electronic timer, adjustable 1-60 sec,
12/24VDC, DPDT 2Amp contact. 2 inches (51 mm) Button - Blue ADA
Illuminated button only.
** NOTE TO SPECIFIER ** Code Compliant Manual Releasing Devices and Sensors 423M and
413MN exit switches used together with the MD31D PIR sensor comply with manual releasing
device and sensor device requirements for Access-Controlled Egress Doors per the following
codes: NFPA 101 Life Safety Code - 7.2.1.6.2; California Building Code. Delete if not required.
m.
Product: Model 423MU/413MNU - Integrated electronic timer, fixed 30 sec
timer, 12/24VDC, DPDT 2Amp contact. (PUSH TO EXIT).
** NOTE TO SPECIFIER ** 430 Series. Delete if not required.
3.
430 Series - 1.5 inches (38 mm) Green Mushroom Button (Red optional).
4.
430 Series - Single gang box mounting.
5.
430N Series - Narrow mullion mounting.
** NOTE TO SPECIFIER ** Available Model for function indicated. Delete product function not
required.
a.
Product: Model 431C/431CN - AA (On/Off) NC SPST. (No Sign).
b.
Product: Model 431O/431ON - AA (On/Off) NO SPST. (No Sign).
c.
Product: Model 432C/432CN - Momentary NC SPST. (EXIT).
d.
Product: Model 432O/432ON - Momentary NO SPST. (EXIT).
e.
Product: Model 433 - Double Gang, Momentary with Timer Module, Adjustable
1-60 seconds 12/24V AC/DC, SPDT 2A contact. (EXIT).
f.
Product: Model 434/434N - Momentary DPST. (EXIT).
g.
Product: Model 435/435N - AA (On/Off) DPST. (No Sign).
h.
Contact: 6 Amp at 30 VDC.
i.
Wire Connection: Screw Terminals.
** NOTE TO SPECIFIER ** The SDC 432KUR latches when depressed and must be reset with the
built-in-key. Applications include alarm, panic alarm and emergency door release where systems
are restored by authorized personnel only.
j.
Product: Model 432KUR/432KNUR - Latching/ key reset DPST (No Sign).
** NOTE TO SPECIFIER ** 440 Series. Delete if not required.
6.
440 Series - 2-5/8 inches (67 mm) Red Mushroom Button. (Green optional).
a.
Contact: 6 Amp at 30 VDC.
b.
Wire Connection: Screw Terminals.
c.
441 thru 444 - Double gang box mounting.
d.
446 - Single gang box mounting.
** NOTE TO SPECIFIER ** Available Model for function indicated. Delete model function not
required.
e.
Product: Model 441 - AA (On/Off) DPST. (No Sign).
f.
Product: Model 442 - Momentary DPST. (EXIT).
g.
Product: Model 443 - Momentary with Timer Module, Adjustable 1-60 seconds
12/24V AC/DC, SPDT 2A contact. (EXIT).
h.
Product: Model 444 - Momentary 2-DPST. (EXIT).
i.
Product: Model 446 - Momentary DPST. (EXIT).
** NOTE TO SPECIFIER ** Finishes for all series switches. Finish: U standard. Delete finishes not
required.
7.
Finish: U - Stainless Steel.
8.
Finish: C - 605 Bright Brass.
h.
08 74 00-36
9.
Finish: D - 606 Dull Brass.
10.
Finish: H - 613 Oil Rubbed Bronze.
11.
Finish: P - 625 Bright Chrome.
** NOTE TO SPECIFIER ** Options for all series switches. L1G, L1R, L2, LT select only one.
12.
Provide L1G - 1 Green LED.
13.
Provide LT - Tri-color LED - Red, Green, Amber.
14.
Provide L1R - 1 Red LED.
15.
Provide L2 - 1 Red, 1 Green LED.
16.
Provide E - Add Exit Sign to AA Function Switch.
17.
Provide G - Green Push Button.
18.
Provide R - Red Push Button.
B.
Vandal Resistant Exit Switches:
** NOTE TO SPECIFIER ** The SDC 450 Series incorporates a 1/4 inch (6 mm) thick aluminum
faceplate and an all stainless steel button. The assembly will resist the impact of a hammer blow.
In addition, security spanner mounting screws are concealed by tamper resistant aluminum plugs
to inhibit tampering.
1.
450 Series - Plate: 1/4 inch (6 mm) thick Aluminum - security screws.
a.
Button: Round Dull Stainless Steel button, 1/2 inch (13 mm).
b.
Contact: 6 Amp at 30 VDC.
c.
Wire Connections: 451/452 - 6 inches (152 mm) leads, 20 gauge. 453 - Screw
terminals.
d.
450 Series - Single gang box mounting.
e.
450N Series - Narrow mullion mounting.
** NOTE TO SPECIFIER ** Pneumatic Time Delay: The 453P includes a 1 to 180 second pneumatic
timer for delayed re-locking. Where preferred, the 10TD Electronic Mini Timer may be specified for
use with the standard 452 model. Delete model not required.
f.
Product: 451/451N - AA (On/Off) SPDT. (No Sign).
g.
Product: 452/452N - Momentary SPDT. (No Sign).
h.
Product: 453P/452PN - Integrated Pneumatic Timer Adjustable 1-180 second.
DPST contact. (No Sign).
** NOTE TO SPECIFIER ** The SDC 463 is a heavy duty, vandal resistant exit switch designed for
harsh indoor or outdoor environments. The stainless steel piezoelectric technology is also ideal
for high traffic applications. The switch assembly design ensures superior performance in
virtually any environment. Delete if not required.
2.
Vandal resistant stainless steel piezoelectric button and faceplate. No moving parts.
Billion cycle button technology. Bi-color status indicator, Red and Green. Integrated
timer, adjustable 1-30 seconds or latching. 0.08 inch (2mm) Stainless Steel U - 630,
security screws.
a.
Product: Model 463/463N - Integrated 1-30 Second Timer or latching SPDT 3
Amp contact (PUSH TO EXIT / EXIT) as manufactured by SDC Security Door
Controls.
b.
463U - Single gang box mounting
c.
463NU - Narrow mullion mounting
d.
Input Voltage: 12/24 VDC.
e.
Current: LED On - Idle-30mA , Active-150mA.
f.
Outputs: SPDT , 3 Amp at 30 VDC.
g.
Relay Life Expectancy: 100,000 cycles at 3 Amp, 30 VDC. 200,000 cycles at
1.5 Amp 30 VDC.
h.
Operating Temperature: -40 degree F to +160 degree F (-40 degree C to +70
degree C).
** NOTE TO SPECIFIER ** 474U/474DU IR Sensor Touchless Series Request-To-Exit Switch Bicolor Status Illumination. Delete if not required.
C.
IR Sensor Touchless Exit Switch. Product as manufactured by SDC Security Door Controls.
08 74 00-37
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model 474U- Single Gang, 630 stainless steel.
2.
Product: Model 474DU - Double Gang, 630 stainless steel.
3.
Input Voltage: 12/24 VDC.
4.
Current: Idle 30mA @12vdc, 15mA @24vdc. Active - 70mA @12vdc, 35ma@24vdc.
5.
Outputs: DPDT @ 3 Amps Resistive
6.
Switch Operating Environment: -4 degree F to +131 F degree.
2.25 MISCELLANEOUS
A.
Emergency Break Glass Release:
1.
SDC 490 series emergency door release stations shall include 2-SPDT contacts for
release of all doors on the same circuit and remote annunciation. A built-in local alarm
is standard.
2.
Product as manufactured by SDC Security Door Controls.
** NOTE TO SPECIFIER ** Delete product not required.
3.
Product: Model 491 - Blue break glass station, emergency door release, 2-SPDT 10
Amp contacts with built-in local alarm (12/24V), 2 replacement glass included. Single
gang box mounted.
4.
Product: Model 491-GL4 - Four replacement glass plates for 491.
5.
Product: Model 491-BB - Blue surface mount box for 491.
6.
Product: Model 492 - Blue pull station, emergency door release, 2-SPDT 10 Amp
contacts with built-in local alarm (12/24V), 2 replacement glass rods included. Single
gang box mounted.
7.
Product: Model 492-GL4 - Four replacement glass rods for 492.
8.
Product: Model 492-BB - Blue surface mount box for 492
B.
Power Transfer Devices and Door Loops:
1.
Products as manufactured by SDC Security Door Controls
** NOTE TO SPECIFIER ** Delete product not required.
2.
Product: Model PT-2U - Armored door transfer loop, less wires. 18 inches (457 mm)
long, 1/4 inch (6 mm) ID.
3.
Product: Model PT-3V - Armored door transfer loop, less wires with wire junction
boxes
4.
Product: Model PT-5 - UL Listed concealed power transfer device, less wires
5.
Product: Model PTM-2AL - Heavy duty power transfer device. Two 18AWG wires.
5amp @ 12/24VDC/AC. Aluminum powder coat.
6.
Product: Model PTM-2BZ - Heavy duty power transfer device. Two 18AWG wires.
5amp @ 12/24VDC/AC. Dark brown powder coat.
7.
Product: Model PTM-10AL - Heavy duty power transfer device. Ten 24AWG wires.
1amp @ 12/24VDC/AC. Aluminum powder coat.
8.
Product: Model PTM-10BZ - Heavy duty power transfer device. Ten 24AWG wires.
1amp @ 12/24VDC/AC. Dark brown powder coat
C.
Programmable Keypad Cabinet Lock:
1.
Product as manufactured by SDC Security Door Controls
2.
Product 295 - Battery powered keypad lock for cabinet doors, drawers, and lockers.
30 User PINs. 2 AA Batteries. 5.5"H x 1.4"W x 0.85"D.
D.
Product EH Series Magnetic Door Holders:
1.
Product as manufactured by SDC Security Door Controls
2.
Product: SDC EH Series magnetic door holders, are designed to hold doors open and
release the door by remote switch or fire life safety command center activation.
3.
Materials: Zinc alloy.
4.
Voltage: Standard dual voltage AC or DC inputs of 12&24V, 24&120V, 24&220V
models
08 74 00-38
5.
Holding Force: Typical holding force of 25-40 pounds; field selectable high holding
force.
** NOTE TO SPECIFIER ** Delete model not required.
6.
Model: EH10 - Flush mount.
7.
Model: EH20 - Semi-flush mount.
8.
Model: EH30 - Surface mount.
9.
Model: EH40 - Floor mount.
10.
Model: EH42 - Floor mount, double.
** NOTE TO SPECIFIER ** Specify voltage:
11.
Voltage: 1224 - 12/24 VAC/VDC.
12.
Voltage: 24120 - 24 VAC/VDC/120VAC.
13.
Voltage: 24220 - 24 VAC/VDC/220VAC.
** NOTE TO SPECIFIER ** Delete finish not required.
14.
Finish: A - Chrome Powder coat.
15.
Finish: P - 625 Chrome plated.
16.
Finish: C - 605 Brass plated.
E.
Emergency Access Panel:
1.
Product as manufactured by SDC Security Door Controls.
2.
Product: Model APB1000A - Emergency access panel for lobby door system.
Mushroom button with key reset and siren.
F.
Wall Mount 400 Series LED Plate:
1.
Finish: U - 630 Stainless Steel.
2.
Product as manufactured by SDC Security Door Controls.
** NOTE TO SPECIFIER ** Delete product not required.
3.
Product: Model 400U-L2 - Two LEDs. Red & Green.
4.
Product: Model 400U-L3 - Three LEDs. Red, Green & Amber.
5.
Product: Model 400U-LT1 - One tricolor LED. Red, Green and Amber.
6.
Product: Model 400U-LT2 - Two tricolor LED. Red, Green and Amber.
G.
Wall Mount 400 Series Sirens and Buzzers:
1.
Product as manufactured by SDC Security Door Controls.
** NOTE TO SPECIFIER ** Delete product not required.
2.
Product: Model Standard Finish 630 Stainless Steel.
3.
Product: Model 400U-RMB - Buzzer on 1 gang plate. 12/24 VDC, 20mA max.
4.
Product: Model 400NU-RMB - Buzzer on narrow plate. 12/24 VDC, 20 mA max.
5.
Product: Model 400U-SN - Siren on 1 gang plate, 3 - 28 VDC, 18 mA max.
6.
Product: Model 400NU-SN - Siren on narrow plate, 3 - 28 VDC, 18 mA max
H.
480 Series Push Plate Switches, Touch Panel Switches and Bollard Posts:
1.
480 Series Push Plate Switches as manufactured by SDC Security Door Controls
2.
Mounting Plate - 1/8 inch (3 mm), Faceplate - 18 Gauge, SPDT - 15 Amp
@125/250VAC, US32D/630 Stainless Standard.
3.
Product: Models - Single Gang Push Plates
a.
482O2U - Push to Open legend.
b.
482A2U - ADA Push to Open legend.
4.
Product: Models - 4.5"x4.5" Square Push Plates.
a.
482O4U - Push to Open legend.
b.
482A2U - ADA Push to Open Legend.
5.
Product: Model - 6"x6" Square Push Plates.
a.
482O6U - Push to Open legend.
b.
482A6U - ADA Push to Open legend.
6.
Product: Models - 4.5" Round Push Plates.
a.
482O4RU - Push to Open legend.
08 74 00-39
7.
8.
b.
482A4RU - ADA Push to Open legend.
Product: Models - 6" Square Push Plate.
a.
482O6RU - Push to Open legend.
b.
482A6RU - ADA Push to Open legend.
Product: Models - ADA Touch Panel Column, 628 Aluminum (V) Std; 613 Bronze
Optional (X).
a.
482AA9 - 9 inches x 6 inches, 22.5 sq. inch active area, ADA Push to Open
legend.
b.
482AA36 - 36 inches x 6 inches, 90 sq. inch active area, ADA Push to Open
legend.
I.
Bollard Posts:
1.
Product models as manufactured by SDC Security Door Controls
2.
For use with Push Plates, Touch Panel Columns & Exit switches
3.
Square 6 inches (152 mm) Aluminum Post, 1/8 inch (3 mm) thick.
a.
BPS6 - 42 inches (1067 mm) Surface mount square post.
b.
BPG6 - 54 inches (1372 mm) In-ground square post.
** NOTE TO SPECIFIER ** Specify post preparation.
c.
Post Preparation: S - Single gang switch prep.
d.
Post Preparation: P - Touch Panel prep.
** NOTE TO SPECIFIER ** Specify Finish.
e.
Finish: V - 628 Aluminum (Std).
f.
Finish: X - 710 Dark Bronze (Optional).
g.
Wireless for Push Plate Switches and Touch Columns:
** NOTE TO SPECIFIER ** Delete wireless device not required.
h.
Provide Model 400W1-433- Wireless 433MHz Micro Transmitter, 1 channel, 9V
battery.
i.
Provide Model 400RC-433 - Wireless Receiver, 1 channel, 12/24 VAC/VDC.
** NOTE TO SPECIFIER ** EmLock® or Electrified Lockset Application. Delete model not required.
J.
Communicating Bathroom Controls:
1.
Product as manufactured by SDC Security Door Controls.
** NOTE TO SPECIFIER ** Delete product not required.
2.
Product: Model EmLock Application
3.
Product: Model CB401-B Emergency access switch, red. 2 Required.
4.
Product CB401-A Communicating Bath switch, U 630 Stainless Steel finish
5.
Product: Model CB701 Emergency key switch, red.
** NOTE TO SPECIFIER ** Model Electrified Lockset Application.
6.
Product: Model CB402-A Communicating bath switch, U 630 Stainless Steel finish.
7.
Product: Model CB402-B Emergency access switch, red. 2 Required.
8.
Product: Model CB702 Emergency key switch, red.
K.
Under Desk Switch:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model 15-1 AA, SPDT push switch, 6 Amp @ 30VAC/DC as manufactured
by SDC Security Door Controls.
2.
Product: Model 15-2 MO, SPDT push switch, 10 Amp @ 30VAC/DC as manufactured
by SDC Security Door Controls.
3.
Product: Model 15-3 AA, SPDT toggle switch, 6 Amp @ 30VAC/DC as manufactured
by SDC Security Door Controls.
4.
Product: Model 15-2-3 (1) MO push switch and (1) AA (on/off) toggle SPDT, 6 Amp @
30VAC/DC as manufactured by SDC Security Door Controls.
L.
Time Delay Relay:
1.
Product: Model 10TD - Time delay relay module with adjustable 1-60 second relock
08 74 00-40
2.
3.
4.
delay as manufactured by SDC Security Door Controls.
Input: 12/24V AC/DC, Output: SPDT, dry contact.
Voltage: 2 Amps @ 30 VDC (resistive).
Size: 2-1/4 inches x 1-1/2 inches x 3/4 inch (57 mm x 38 mm x 19 mm).
M.
Timers:
1.
Product: Model 14-2 - 7 day programmable timer with memory battery back-up
capability as manufactured by SDC Security Door Controls.
2.
Output: 1 SPDT, dry contact.
3.
Voltage: 16 Amps @ 30 VAC/DC.
** NOTE TO SPECIFIER ** Delete input voltage not required.
4.
Input Voltage: 12V AC/DC.
5.
Input Voltage: 24V AC/DC.
N.
Passive Infrared Egress Control:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model MD-31D-W - Motion detector with time delay, white as manufactured
by SDC Security Door Controls.
2.
Product: Model MD-31D-B - Motion detector with time delay , black as manufactured
by SDC Security Door Controls.
O.
Door Position Sensors:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model DPS-11 - Adjustable ball type SPDT 5 Amp.
2.
Product: Model DPS-11-2 - Adjustable ball type 2 SPDT 5 Amp.
3.
Product: Model MC-4 - Recessed magnetic (3/4 inch (19 mm), SPDT, 30VDC, 50mA).
4.
Product: Model MC-4M - Recessed magnetic mounted on 1-1/4 inches by 4-7/8
inches (32 mm by 124 mm) plate.
5.
Product: Model MC-7 - Biased high security recessed magnetic (1 inch (25 mm),
SPDT, 30VDC, 50mA).
P.
Latch and Deadbolts Monitoring Strike:
1.
Provide latch and or deadbolt position status. Compatible with deadbolts, cylindrical
locks, mortise locks, and mortise locks with latch and deadbolt as manufactured by
SDC Security Door Controls. Strike plates not included. 5 Amp @ 30 VAC/DC.
** NOTE TO SPECIFIER ** Delete product not required.
2.
Product: Model MS-12 - Cylindrical latch monitor 2-3/4 inches (70 mm) SPDT.
3.
Product: Model MS-12D - Cylindrical latch monitor 2-3/4 inches (70 mm) DPDT.
4.
Product: Model MS-14 - Cylindrical latch monitor 4-7/8 inches (124 mm) SPDT.
5.
Product: Model MS-14D - Cylindrical latch monitor 4-7/8 inches (124 mm) DPDT.
6.
Product: Model MS-16 - Mortise lock latch monitor SPDT.
7.
Product: Model MS-16D - Mortise lock latch monitor DPDT.
8.
Product: Model MS-18 - Mortise lock deadbolt monitor SPDT.
9.
Product: Model MS-18D - Mortise lock deadbolt monitor DPDT.
10.
Product: Model MS-20 - Mortise lock latch and deadbolt monitor SPDT. Handed but
reversible.
11.
Product: Model MS-20D - Mortise lock latch and deadbolt monitor DPDT. Handed but
reversible.
2.26 CONTROL CONSOLES
A.
Mini Desktop Consoles:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model DTMO-1 - One momentary switch and one LED as manufactured by
SDC Security Door Controls.
08 74 00-41
2.
3.
4.
5.
6.
7.
8.
Product: Model DTMO-2 - Two momentary switches and two LED's as manufactured
by SDC Security Door Controls.
Product: Model DTMOMA-2 - One momentary, one maintained switch and two LED's
as manufactured by SDC Security Door Controls.
Product: Model DTMA-2 - Two maintained switches and two LED's as manufactured
by SDC Security Door Controls.
Dimensions: 4.125 inches W by 3.125 inches H by 6.25 inches L.
Contact Rating: 5 Amp at 30 VDC maximum.
Input Power: 24 VDC at 0.02 Amp required for each LED.
Color: Beige.
B.
Modular Control Consoles:
** NOTE TO SPECIFIER ** Delete product not required.
1.
Product: Model TCC - Slope front desk top console as manufactured by SDC Security
Door Controls.
a.
12 stations maximum when using 2 control panels. Base unit, less panels. 2
panels required.
b.
Color: black sides and beige top
c.
Dimensions: 10-1/4 inch W by 4-3/4 inches H by 9-5/8 inches D (260 mm by
121 mm by 244 mm).
2.
Product: Model RCC Rack mount console as manufactured by SDC Security Door
Controls.
a.
24 stations maximum when using three control panels. (Maximum is 20 stations
with "E" panel). Base unit, less panels. 3 panels required
b.
Color: Beige
c.
Dimensions: 19 inches W by 5-1/4 inches H by 6 inches D (483 mm by 133 mm
by 152 mm).
3.
Switch and Indicator: Rocker Switch Rating: 3 Amp @ 30VDC. Power Required per
LED: 24VDC @ 0.02 Amp.
** NOTE TO SPECIFIER ** Delete switch and indicator panel type not required.
a.
Panel: AL4 Four momentary switches with LEDs.
b.
Panel: BL4 Four maintained switches with LEDs.
c.
Panel: CL4 Four momentary/off/maintained switches with LEDs.
d.
Panel: DL4 Four momentary/off/momentary switches with LEDs.
e.
Panel: AL8 Eight momentary switches with LEDs.
f.
Panel: BL8 Eight maintained switches with LEDs.
g.
Panel: CL8 Eight momentary/off/maintained switches with LEDs.
h.
Panel: DL8 Eight momentary/off/momentary switches with LEDs.
i.
Panel: AL4E Four momentary switches with LEDs, alarm, reset push button
and key lock.
j.
Panel: BL4E Four maintained switches with LEDs, alarm reset push button and
key lock.
k.
Panel: CL4E Four momentary/off/maintained switches with LEDs, alarm, reset
push button and key lock.
l.
Panel: DL4E Four momentary/off/momentary switches with LEDs, alarm, reset
push button and key lock
m.
Panel: EA Panel with alarm, reset push button and key lock.
n.
Panel: F Blank panel.
** NOTE TO SPECIFIER ** Delete cabinet type not required.
4.
Cabinet: CAB7 - Black cabinet for one RCC. 7 inches H by 20-1/2 inches W by 14-1/2
inches D (178 mm by 521 mm by 368 mm).
5.
Cabinet: CAB12 - Black cabinet for two RCC. 12-1/2 inches H by 20-1/2 inches W by
14-1/2 inches D (318 mm by 521 mm by 368 mm).
** NOTE TO SPECIFIER ** Typical system application. Typical components for security access
systems include a locking device, an access control device, an egress device, a power supply, a
08 74 00-42
door control module and remote control/sensing. Delete application not required.
2.27 ELECTRIFIED LOCKSET APPLICATIONS
** NOTE TO SPECIFIER ** Delete if not required.
A.
Single Door:
1.
Method of Operation: Access/Egress - Presenting an authorized card to the reader
releases the lever of the locking device momentarily for access. Entry momentary
unlock time is determined by the card reader programming. Egress will be free at all
times.
a.
Emergency Release: All locks will release automatically upon activation of the
fire life safety system.
2.
Hardware:
a.
Stand Alone Card Reader.
b.
Electrified Mortise Lockset - Failsafe.
c.
Electric Hinge.
d.
Power Supply with Emergency Release.
** NOTE TO SPECIFIER ** Delete if not required.
B.
Single Door:
1.
Method of Operation: Access/Egress - Presenting an authorized card to the reader
releases the lever of the locking device momentarily for access. Entry momentary
unlock time is determined by the card reader programming. Egress will be free at all
times.
2.
Hardware:
a.
Stand Alone Card Reader.
b.
Electrified Mortise Lockset - Failsecure.
c.
Electric Hinge.
d.
Power Supply.
** NOTE TO SPECIFIER ** Delete if not required.
C.
Single Door:
1.
Method of Operation: Access/Egress - Entering a valid digital code releases the
locking device momentarily for access. Pressing the exit switch button releases the
locking device momentarily for egress. Entry and exit momentary unlock time is
determined by digital keypad programming. Emergency Release: All locks will release
automatically upon activation of the fire life safety system.
2.
Hardware:
a.
Integrated Outdoor Keypad.
b.
Electrified Mortise Lockset by REX Output.
c.
Power Transfer Hinge.
d.
Power Supply with Emergency Release.
** NOTE TO SPECIFIER ** Delete if not required.
D.
Single Door:
1.
Method of Operation: Access/Egress - Entering a valid digital code releases the lever
of the locking device momentarily for access. Entry momentary unlock time is
determined by digital keypad programming. Exit will be free at all times.
2.
Hardware:
a.
Integrated Outdoor Keypad.
b.
Electrified Mortise Lockset by REX Output - Failsecure.
c.
Power Transfer Hinge.
d.
Power Supply.
** NOTE TO SPECIFIER ** Delete if not required.
08 74 00-43
E.
Single Door:
1.
Method of Operation: Access/Egress - Entering a valid digital code releases the lever
of the locking device momentarily for access. Entry momentary unlock time is
determined by digital keypad programming. Exit will be free at all times.
2.
Hardware:
a.
Integrated Keypad.
b.
Electrified Mortise Lockset by REX Output.
c.
Power Transfer Hinge.
d.
Power Supply with Emergency Release.
** NOTE TO SPECIFIER ** Delete if not required.
F.
Single Door:
1.
Method of Operation: Access/Egress - Entering a valid digital code releases the lever
of the locking device momentarily for access. Entry momentary unlock time is
determined by digital keypad programming. Exit will be free at all times.
2.
Hardware:
a.
Integrated Keypad.
b.
Electrified Mortise Lockset by REX Output - Failsecure.
c.
Power Transfer Hinge.
d.
Power Supply.
** NOTE TO SPECIFIER ** Typical system application. Typical components for security access
systems include a locking device, an access control device, an egress device, a power supply, a
door control module and remote control/sensing. Delete application not required.
2.28 ELECTRIC STRIKE APPLICATIONS
** NOTE TO SPECIFIER ** Delete if not required.
A.
Single Door:
1.
Method of Operation: Access/Egress - Entering a valid digital code releases the
locking device momentarily for access. Entry momentary unlock time is determined by
digital keypad programming. Exit will be free at all times by turning the inside lever.
Sustained Bypass: When so programmed, entering a bypass code unlocks the door
for a sustained period until manually reset.
2.
Hardware:
a.
Integrated Keypad.
b.
Heavy Duty Electric Strike - Failsecure. ANSI 4-7/8 inches for Cylindrical Lock.
c.
Power Supply.
PART 3 EXECUTION
3.1
3.2
EXAMINATION
A.
Do not begin installation until substrates have been properly prepared.
B.
If substrate preparation is the responsibility of another installer, notify Architect of
unsatisfactory preparation before proceeding.
PREPARATION
A.
3.3
INSTALLATION
A.
3.4
Prepare openings using the methods recommended by the manufacturer for achieving the
best result for the substrate under the project conditions.
Install in accordance with manufacturer's instructions.
PROTECTION
08 74 00-44
A.
Protect installed products until completion of project.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION
08 74 00-45