TSP100ECO
During the design and development of this product, Star has worked on every
aspect of the product life cycle from its manufacturing…

An Advanced ECO Engineered Product
– Reduction in power consumption
• Power consumption reduced during operation (Star Technology)
• Power consumption reduction during non- operation (Energy Star)
– Due to its low energy consumption while idle it has been Energy
Star Certified
– Less than 0.05 Watts in idle state
– Materials of TSP100ECO
• Housing uses Environmental Friendly materials
– Manufacturing of Printer
• Factory has reduction of Greenhouse Gas emissions
• Star Micronics purchase of Carbon Offset Credits
To its field use and finally to its waste management

Product Efficiency
– Reduce blank space (top margin)
– Reduce length of receipt
– Reduce paper width

NEW Packaging
– Use of recyclable material
Reduction in Power Consumption
The TSP100ECO satisfies the Low Power
Consumption Level for ENERGY STAR.
Less than 0.05 Watts in idle state
Reduction in Power Consumption
Through Power Management
USB Plug In
System Off Mode 0.05W
* Not Zero Power Consumption
Is Host Powered ON?
No
Yes
0.3 - 0.5 seconds
System Check Mode 1.8W
After 5 seconds
Print Ready Mode 0.76W
Yes
Is Host Powered OFF?
No
No
Print Signal?
Yes
0.2 seconds
System Check Mode 1.8W1
Printing 34.0W
*
The power consumption at
“Print Ready Mode” on
TSP100ECO is only 0.76 [W]!
* Reference : TSP100U = 3.2
[W]
* Rolling ASCII Print
Reduction in Power Consumption
TSP100ECO vs. Competition
24 hours/day [Cycle]
7 days/Week
300 receipts/day [Length of Receipt] 150 mm
TSP100ECO
TSP143U
TM-T88IV
HSP7000
TM-H6000III
+PS-180
+PS60A-24B
+PS-180
150 mm
Conditions
[TIME]
[Receipt Qty]
Printer
Power
CO2
Consumption kWh
36.7
143.5
61.4
151.2
136.1
CO2 Emission kg
15.4
60.3
25.8
63.5
57.2
Power Consumption (kWh)- (For 5 Years)
TSP100ECO
36.7
143.5
TSP143U
TM-T88IV+PS-180
61.4
HSP7000+PS60A24B
TM-H6000III+PS180
151.2
136.1
[Note] CO2 calculation methods are different among countries.
In this table, it is calculated by Japanese method.
Modification of Printer Housing
The Printer Housing of the new TSP100ECO is made of Polymer Alloy, a compound
manufactured from Polystyrene (PS) and Polyphenylene Ether (PPE)
Environmental Significance
Halogen-free ⇒ Reduction of Environmental Impact
No more Dioxin emission during the manufacturing process
Made with 10% of recycled material ( PS ) ⇒ Conservation of Resources
Light Resistance ⇒ no more color fading
New Housing Material to stress the emphasis of Star’s
Environmental Consideration for use of Halogen-Free and
Recycled Material in the TSP100ECO printer.

Reduce Blank space
• Capability of changing the top margin from 11mm to 3mm in 1mm
increments (default setting is 3mm)
• With Partial Cut only using back feed
11 mm
3 mm
Savings on Paper Consumption
50 % Compress
Paper Saving of 50%
when utilizing vertical
50% compression
Paper Saving increased
when using 3mm top
margin + vertical 50%
compression
50 % Compress
75 % Compress
Capability of Vertical and Horizontal Receipt Compression
• Vertical : 100% · 75% · 50%
• Horizontal : 100% · 67%
100 %

67 % Compress
Paper Saving increased
additional 33% when using
53mm paper from 80mm
paper

Configuration Utililty
o Eco Settings
• Scaling (Compress)
• Horizontal
• Vertical
• Top Margin
• 11mm to 3mm
Capability to Choose if a Receipt is to
be printed
If yes, the receipt is printed
If no, the receipt is not printed, BUT the
Receipt can be saved in the PC Hard Drive
This function is available with OPOS
and JavaPOS for Windows, as well.
Instant paper savings when the
receipt is not printed!

Configuration Utililty
o Eco Settings
• “On Demand”
ECO Analysis Tool
Users can simulate Money-Save-Effect by paper saving.
* This tool is only for calculation of Paper Savings, not for Power Savings, as the
“Money-Savings-Effect” by Power Savings may be perceived as small.
* Working days
Default : 365
* Receipts per day
Max : 10,000
* Receipt Length
Max : 1,000 mm
* Monetary Unit
JPY
USD
HKD
MYR
CNY
GBP
EUR
AUD
How many
receipts do
you print and
just how
much paper
could you
save?
* Top margin
3 to 11 mm
* Paper width used
58 or 80 mm
* Receipt length
reduction
Original
25% reduction
50% reduction
INSTALLATION CD
and FUTUREPRNT
software
6 FT. POWER CABLE
WALL BRACKET KIT
SAMPLE PAPER ROLL 80mm
• USB CABLE
• VERTICAL MOUNT ACCESSORY
• 58 MM ROLL PAPER GUIDE
• UPPER GUIDE
14
WHQL Certified - Certified by Microsoft® for effortless installation
ESC/POS™ Emulation - Easy drop-in replacement
2D Bar Code Printing - 2D bar codes store more information than traditional
1D types and replicate the data multiple times for better scanning reliability.
QR Code is supported.
Maintenance Counter Status - Keep track of how many times the auto cutter
has cut and the distance that the print head has printed for hardware
performance measurable
Two Color Printing Capability - Highlight important information
Logo Utility - Store logos and other graphics for professional receipt branding
Memory Switch Utility - Fine-tune your print outs or print in different
languages by enabling, changing, or disabling certain settings
For every TSP100ECO printer manufactured, Star Micronics
purchased Carbone Emission Credit equal to the printer
manufacturing and operation for the first 5 years.
“Carbon offsetting is the act of counterbalancing
unavoidable CO2 emissions from your daily life or
economic activities by supporting the CO2 reduction
projects conducted globally”
 Amount of CO2 Offset per unit: Total 33.9 kg / unit
(* From Manufacturing & disposal process : 11.9 Kg / From Power consumption for 5 years : 22.0 kg)
FOR the END USER TO Display to their
customers – they are participating in
SAVING the ENVIRONMENT

Printer Speed is now 28RPM from 22 RPM
TSP100ECO available with CUTTER (Partial Cut only)
NO TEAR BAR VERSION
PUTTY OR CHARCOAL GRAY COLOR
USB INTERFACE
 Warranty
on the TSP100ECO
Full 3 Year Warranty (Print Head &
Cutter included)
Complimentary Swap-A-Star on 1st Year
Complimentary Extend-A-Star on Year
2, 3 & 4
Upper Guide –
Installation required for
Vertical Orientation of Printer
Note : Upper Guide for TSP100ECO is not compatible with Upper Guide for previous TSP100 Series.
• XML file which was created for current
TSP100 Series can be used with
TSP100ECO
• When the USB cable is connected to host,
Plug & Play will work. The AC (Power)
Cable does not have to be connected.
Print Speed is 150mm/sec

Print Speed has been improved compared with TSP100U (125 mm/s).
No Power Switch


Printer automatically goes into System-Off-Mode (0.07W), when host is shut down.
Self-Print instructions:
1.Connect Power Cable
2. Connect ONE USB Plug
4. Connect OTHER USB Plug
3. Hold FEED Button DOWN
Printer Specifications
[1]
Print Method
Direct Line Thermal Printing
[2]
Print Resolution
8 x 8 dots / 203 dpi
[3]
Print Speed
[4]
Paper Feed Speed
Up to 150 mm per second
[5]
Printable Width
Max. 72 mm
[6]
Top Margin
3 mm – 11 mm (Default 3 mm)
[7]
Paper Sensors
PE sensor
[8]
Auto-Cutter
Partial cut (Guillotine)
[9]
Min. Cut Length
24 mm
[10]
Auto-Cutter Life
1 million cuts
[11]
Print Head Life
Max. 100 million pulse / 100 Km (using recommended paper)
[12]
Reliability
60 million lines MCBF
[13]
Dimensions
142 (W) x 204 (D) x 132 (H) mm
[14]
Weight
1.72 kg
[15]
Power Supply
Internal (100V – 240V)
[16]
Power Consumption
[System Off] 0.05 W
28 RPM
[System Check] 1.8 W
[Printing] 34W
Paper Specifications
[1]
Width
80 mm / 58 mm
[2]
2 Color Printing
Special thermal paper required
[3]
Thickness
0.065 ~0.085mm
[4]
Roll Diameter
Max 83 mm
Software
[1]
Emulations
Star Line Mode & ESC/POS
[2]
Code Pages
40 pages
[3]
Interface
USB only
[4]
Interface Options
N/A
[5]
Drivers
Windows, Linux, OPOS, JPOS, Mac,