FMM Institute (475427-W)
Penang Branch
10 CEP Points
Machine Safeguarding
21 & 22 September 2015,
9.00 am – 5.00 pm
Training Venue:
Vistana Hotel,Penang
SBL SCHEME
CLAIMABLE FROM PSMB
1.
Introduction
This course covers the process to identify, select and properly safeguard machinery to
protect employees and others in the work area and deliver appropriate training in safe
work practices. Course topics include types of machinery requiring guarding, point of
operation, emergency eyewash/shower requirements, hazard communication, Factories
& Machinery Act & Regulations related to Machinery and Machine Guarding Standards
violations, and corrective actions. Upon course completion students will have the ability
to explain hazardous actions and motions of various types of machinery, identify
methods of safeguarding, and match identified safeguards with the applicable
Machinery and Machine Guarding Standards to reduce and eliminate the potential for
accidents and injuries including following guidelines in ergonomics principles of machine
safeguarding. Fortunately, machine hazards can be avoided through the compliance of
safety rules and regulations including the use of lockout/tagout procedures.
Lockout/tagout procedures isolate energy and control machinery, helping to protect
employees servicing the machinery.
2.
Program Outline

Basics of Machine Safeguarding – Mechanical & Non-Mechanical - Electrical,
Pneumatic, Hydraulic, Noise Hazards

Factories and Machinery Act FMA & Regulations related to Machine
Safeguarding

Methods of Machine Safeguarding – Guards, Devices, Automatic Systems

Machine Guard Construction

Machinery Maintenance and Repair

Lockout/Tagout procedures

Ergonomics of Machine Safeguarding
3.
Learning Outcomes
 Promote machinery safety awareness at workplace
 To prevent machine accident at workplace
 Understand the FMA Act & Regulations related to machine safegarding and their
application
 Understand lockout/tagout (LOTO) procedures
 Guide to ergonomics principles of machine safeguarding
4.
Methodology
Lectures & Presentations
LCD slide and video presentations
Interaction & Case study
●
●
●
5.
Target Audience
Employees working with machinery, technicians, chargeman, safety and health
committee members etc.
THE TRAINER
Ir Harapajan Singh holds a Master of Engineering with Distinction (Electrical) from
University of Nottingham, UK, Professional Examination of the Council of Engineering
Institutions (Engineering Council) UK in Electrical and Electronic Engineering and a
Diploma in Engineering (Electrical) from University Technology Malaysia.
Ir. Harapajan is a professional, competent electrical engineer and registered electrical
energy manager with over 30 years of lecturing experience in the electrical
engineering field. He specializes in safe and efficient electrical operation and
maintenance and has wide range of knowledge and experience in government and
industry. He has conducted several courses on electrical safety and lockout/tagout in
the Universities and several manufacturing industries including FMM, Terengganu Safety
Training Centre, Mattel, Tesco, Carsem, Exxon and PETRONAS.
ADMINISTRATIVE DETAILS
COURSE FEE
RM900 (FMM Member) / RM990 (Non-Member) per participant
(The fee includes luncheon, coffee/tea breaks and notes)
Special Rate for Self-Sponsored
Price includes GST
DRESS CODE
Office Attire
REGISTRATION
Participation in the program is based on a first-come-first-served
basis. Cheque made in favour of the “FMM Institute” should be
forwarded on or before program date to the FMM Institute, Northern
Branch, Bandar Seberang Jaya. Participants, who registered but did
not attend, will be billed accordingly. Upon confirmation, kindly send
us the payment before the commencement of the program.
CANCELLATION
There will be no refund for cancellation within 2 days prior to the
program, 50% for cancellation between 3 – 6 days and full refund for
cancellation 7 days prior to the program. Please inform in writing if
you intend to cancel. A replacement can be accepted at no
additional cost.
DISCLAIMER
and
The FMM Institute reserves the right to change the facilitator, date
to vary / cancel the program should unavoidable circumstances
arise. All efforts will be taken to inform participants of the changes.
Upon sending the registration form, you are deemed to have read
and accepted the terms and conditions.
ENQUIRIES
Ms Nazliza / Mr Haffiz
FMM Institute
No 2767, Mukim 11, Lebuh Tenggiri 2, Bandar Seberang Jaya,
13700 Seberang Perai
Tel : 04-6302052 ( Nazliza ) / 04-3992057 ( Haffiz )
Fax : 04-6302054 / 04-3994863
Email : fmmpenang@fmm.org.my
nazliza@fmm.org.my
haffiz@fmm.org.my
CLOSING DATE 16 September 2015
REGISTRATION FORM
Machine Safeguarding
To : Ms Nazliza / Haffiz
( Fax : 04-6302054)
(Email: nazliza@fmm.org.my
FMM Institute (Penang Branch)
1. Name
:______________________________________________
Enclosed cheque / bank draft no.
________________ for
RM__________________________
payment for
being
participant(s) made in favour of “FMM Institute”
Designation : __________________________________________
*Submitted By :
Email:_________________________________________________
Name:___________________________________
2. Name :______________________________________________
Designation:_______________________________
Designation : __________________________________________
Company:_________________________________
Email:_________________________________________________
Address:_________________________________
3. Name :______________________________________________
_________________________________________
_________________________________________
Designation : __________________________________________
Email:_________________________________________________
4. Name :______________________________________________
Designation : __________________________________________
Email:_________________________________________________
Tel :_____________________________________
Fax:_____________________________________
Email:____________________________________