request for bid

advertisement
OKLAHOMA STATE UNIVERSITY-TULSA
PURCHASING DEPARTMENT
700 NORTH GREENWOOD
TULSA, OKLAHOMA 74106
Oklahoma State
University
Issue Date June 5, 2006
Request for Bid No. OS061421-LMB
DAYS REQUIRED
FOR DELIVERY: 30 TERMS:
No Bid Received after June 13, 2006 2:00PM
RETURN Bids TO: ===
F.O.B. OSU-Tulsa at 700 North Greenwood, Tulsa, Oklahoma
BIDDER AGREES TO COMPLY WITH ALL TERMS AND CONDITIONS OF THE BID.
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
Yes
No
VENDOR NOTE: PLEASE INCLUDE YOUR FEI/SS NUMBER
*************REQUEST FOR BID**************
Bids will be opened at TIME & DATE North Hall room 253 I.
OSU-Tulsa is requesting bids for Audio/Visual equipment per
attached continuation sheets (3-20). Include freight charges in total
price. Bids that are faxed or e-mailed will not be accepted
Please mark outer envelope: SEALED BID #OS06142-LMB
Date & Time of Closing June 13, 2006 2:00PM
Bid Price Adjustment if a credit card (Mastercard) is used for payment?
If Yes, please state adjustment percentage. Add_______% Deduct _______%
THIS BID IS INVALID IF NOT SIGNED AND NOTORIZED
AFFIDAVIT:
STATE OF
COUNTY OF
of lawful age, being first duly sworn, on oath says:
1. (s)he is the duly authorized agent of the bidder and/or contractor submitting the competitive bid and/or procuring the contract which is attached to the statement
for the purpose of certifying the facts pertaining to the existence of collusion among bidders and between bidders and state officials or employees, as well as, facts
pertaining to the giving or offer of things of value to government personnel in return for special consideration in the letting of any contract pursuant to the bid to which
this statement is attached: 2 (s) he is fully aware of the facts and circumstances surrounding the making of the bid and/or the procurement of the contract to which this
statement is attached and has been personally and directly involved in the proceedings leading to the submissions of such bids; and 3. Neither the bidder/contractor ,s
direction or control has been a party: a to any collusion among bidders in restraint of freedom of competition by agreement to bid at a fixed price or to refrain from
bidding,b. to any collusion with any state official or employee as to quantity, quality or price of the prospective contract, or as to any other terms of such prospective
contract,nor c. in any discussions between bidders and any state offical concerning exchange of money or other thing of value for special consideration in the letting of a
contract, d. to paying, giving or donating or agreeing to pay, donate to any officer or employee of the State of Oklahoma, any money or other thing of value,either
directly or indirectly, in procuring the contract to which his statement is attached.
FIRM
Subscribed and sworn before me this
day of
BIDDER
SIGNED BY
, 20
.
NAME & TITLE
ADDRESS
My Commission Expires:
CITY & STATE
ZIP CODE
DATE
Notary Public (Clerk or Judge)
PHONE
This submitted as a legal offer and acceptance by the Oklahoma State University Purchasing Department constitutes a binding
contract.
BIDS MUST BE RETURNED ON THIS FORM AND/OR ATTACHED PAGES. RE-COPIED LISTS WILL NOT BE ACCEPTED.
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
TERMS AND CONDITIONS
1.
Sealed bids will be opened by the Oklahoma State University Purchasing Department at the Office of the Director of Purchasing or his designee, 700 North Greenwood,
Tulsa, Oklahoma, 74106 at the time and date shown on front page of this bid. Bids received after the time shown will not be considered.
2.
Bids are to submitted in a sealed envelope containing only one bid. Envelopes are to be clearly marked with bidder name and address in the upper left corner and with
COMPETITIVE BID NUMBER AND CLOSING DATE AND TIME in the lower left corner. The Purchasing Department reserves the right to reject any or all bids or parts of
bids.
3.
This contract may be bid and awarded on an ALL OR NONE basis, by item or groups of items, whichever is in the best interest of the University.
4.
The bid shall be submitted on this approved form. Alternate forms will not be accepted. Quotations must be typewritten or written in ink, and corrections must be initialed.
Penciled bids will not be accepted. Any bid award and subsequent payment will be made on the basis of bidder’s name as shown on the invitation to Bid.
5.
Bidders shall submit only ONE bid per item and guarantee unit price to be correct.
6.
Firm prices shall be bid F.O. B. requesting agency and include packaging, handling, shipping, and delivery changes fully prepaid by the vendor.
7.
The vendor shall deliver merchandise as bid. NO deviations shall be made.
8.
No interpretation of the meaning of the plans, specifications or other contract documents will be considered valid unless such request for interpretation is addressed
9.
MANUFACTURERS’ NAMES AND APPROVED EQUIVALENTS: Any manufacturers’ name, trade names, brand names, information and/or catalog numbers listed in a
specification are for information and not intended to limit competition. The bidder may offer any brand for which he is an authorized representative, which meets or
exceeds the specification for any item(s). If bids are based on equivalent products, indicate on the bid form the manufacturer’s name and number. Bidder shall submit
with this proposal, sketches, and descriptive literature, and/or complete specifications. Reference to literature submitted with a previous bid will not satisfy this provision.
The bidder shall also explain in detail the reason(s) why the proposed equivalent will meet the specifications and not be considered an exception thereto. Bids which do
not comply with these requirements are subject to rejection. Bids lacking any written indication of intent to bid an alternate brand will be received and considered in
complete compliance with these specifications as listed on the bid form.
10.
All bids submitted are subject to Oklahoma State University Purchasing Department and/or Board of Regents Purchasing Policies and Procedures and these General or
any Special Conditions and specification listed herein – all of which are made a part of this bid invitation by reference.
11.
This bid is submitted as a legal offer and any bid when accepted by the Oklahoma State University Purchasing Department constitutes a firm contract.
12.
This form must be made out in the corporate name of the bidder and must be fully and properly executed by an authorized person, signed in ink, and notarized with full
knowledge and acceptance of all its provisions.
13.
Oklahoma laws require each bidder submitting a competitive bid to the State of Oklahoma for goods or services to furnish and notarized sworn statement of non-collusion,
therefore, this bid is invalid if not signed and notarized.
14.
Cash and other discounts will be considered and evaluated in the bed award. However, cash discounts will be considered only if for a period of twenty (20) days or more.
15.
All bids must be submitted exclusive of Federal Excise Tax and Oklahoma State Tax. In all cases where a federal tax exemption is required, please make such notation
on your bid and an Exemption Certificate will be furnished to the vendor with the Purchase Order.
16.
If bidding “all or none”, either by groups of line items or by total of line items this must be clearly stated on the invitation to Bid response.
17.
REQUIRED DELIVER DATE: In the event a required delivery date is specified on the reverse aide of this bid the successful bidder will be expected to meet this date.
Failure to meet the required delivery date during the performance of the resulting contract could be cause for termination.
18.
If not submitting a quotation on this Invitation to Bid, please return note “No Bid”. Any bidder who fails to return the third (3rd) consecutive Invitation to Bid may be removed
from the bid list at this discretion of the Oklahoma State University Purchasing Office.
19.
Bidder acknowledges and approves the Terms and Conditions contained herein and attached hereto and by submission of this bid agrees these Terms and Conditions
shall supersede and Terms and Conditions offered by the bidder.
20.
In entering into any contract resulting from this bid the bidder agrees to comply with Equal Employment Opportunity requirements as stipulated in Executive Order 11246
and Executive Order 11375 and all subsequent amendments thereto and superseding orders.
21.
Bids may be rejected unless the above procedures are followed. The university reserves the right to reject any and all bids if it is in the best interest of the university to do
so.
22.
If services include the use or disclosure of Patient Health Information (PHI) then a HIPAA Business Associates Agreement will be required before services begin.
Are you a small business? Yes____ No____
(as currently defines by the Small Business Adminsitration)
Page
Are you a minority firn? Yes ____ No ____
(defined as 51% owned by Black Americans, Hispanic Americans, American Orientals
, American Indians, American Eskimos or American Aleuts.)
2
of
20______Pages
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
Desired delivery date to be 5 business days after receipt of
order.
Days required for delivery: __________________
1.
13
Ea.
LG M4200C-BA LCD Monitor or Acceptable Equal
Manufacturer________________ Model______________
$
Features:
Aspect Ratio: 16:9
Native Resolution: 1366 x 768p
Pixels (H x V x3): 3,147,264
Brightness: 500 cd/m2
Contrast Ratio: 1100:1
Anti-Glare
MTBF: 50,000 Hr
Max Input Resolution 1280 x 1024 (Analog/Digital)
Display type: Flat panel display: TFT active matrix
Display (projector) diagonal size: 42”
Compatibility: PC
Width: 41.3”
Height: 25.7”
Depth: 4.4”
Response Time: 8 ms
Color Support: 24-bit (16.7 million colors)
Image brightness: 500
Max vertical view angle: 178
Max horizontal view angle: 178
Max sync rate (V x H): 85Hz x 85 KHz
Digital video standard: Digital Visual Interface (DVI)
Analog video signal: RGB, S-Video, Component video,
Composite video
Audio Output: 1
Audio Inputs 3 Plus PC Sound
HDTV Formats 720p, 1080i
Power Supply: 90~264V/AC
Operational power consumption: 320 Watt
Operational power consumption (standby): 4 Watt
15 pin connector
2
13
Ea
LG M4200C-BAT KIT Tilt wall mount kit for LG M4200CBA LCD Monitor or Acceptable Equal
Page
3
of
20______Pages
$
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
Manufacturer________________ Model______________
3
3
Ea
$
$
$
$
$
$
Kramer VP-724xl 8 input scaler/switcher or Acceptable
Equal
Manufacturer________________ Model______________
Features:
Multi-Standard: PAL, SECAM & NTSC (3.58/4.43)
HDTV Compatible Component Inut
Inputs: 2 composite video, 2 S-Video, 1 component video
(RGB/YUV) 1 DVI-D (on a DVI-I connector) and 2
computer graphics on a 15 pin HD connector. 8 AFV audio
Outputs: Video 2 computer graphics/HDTV video on 15 pin HD
connectors. Audio: 1 line level stereo & 1 speaker (5 Watts RMS
per channel)
Computer Graphics Output Resolutions: VGA (640 x 480),
SVGA (800 x 600), XGA (1024 x 768), SXGA (1280 x 1024),
UXGA (1600 x1200), 852 x 1024i, 1024 x 1024i, 1366 x 768,
1365 x 1024, 1280 x 720, 720 x483, 852 x 480, 1400 x 1050, and
a user-defined output resolution.
HDTV Output Resolutions: 480p, 720P and 1080i in component
format on the HD-15 output connector.
Aspect Ratio: 4 x 3 or 16 x 9, anamorphic and letterbox.
Color Space - Output RGB or YUV (Selectable).
Picture-In Picture - Insert a video image into agraphics
background or vice versa or split-screen (two images side by
side).
Color Space - Output RGB or YUV (Selectable).
Fade-Thru-Black (FTB™) Switching
Freeze Frame, Video Mute, & Zoom (100% to 400%).
High Quality De-Interlacing: 3:2 and 2:2 pull down.
Power Source: 110-240V AC, 50/60Hz
Dimensions (W x D x H): 19" x 9.3" x 1U rack mountable
4
4
Ea
Kramer 105S 1:5 S-Video Distribution Amplifier or
Acceptable Equal
Manufacturer________________ Model______________
Page
4
of
20______Pages
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
Features:
Input: 1 S-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C), on a 4p
connector
Outputs: 5 S-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C), on 4p
connectors
Max Video Output: 2 Vpp (Y)
Video Bandwidth (-3dB): 230MHz (Y)
Diff. Gain: 0.08%.
Diff. Phase: 0.12 Deg
K-Factor: 0.05%
S/N Ratio: 72dB
Power Source: 12 VDC, 100mA
Dimensions: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D,
H.)
5
4
Ea
Damac PD1219BC111 15 Amp Rackmount Switched Power
Strip or Acceptable Equal
Manufacturer: ______________
Model _______________
$
$
$
$
$
$
Features:
Receptacles: 125V NEMA 5-15R & 5-20R
Power Cord: 125V NEMA 5-15P, 5-20P, L5-20P & L5-30P
Resetable circuit breaker with surge protection
6
2
Ea
Damac PO828BC211 28”-15 Amp Vertical Mounting
Switched Power Strip or Acceptable Equal
Manufacturer: ____________ Model: _____________
7
1
Ea
Features:
Receptacles: 125V, NEMA 5-15R & 5-20R
Power Cord: 125V, NEMA 5-15P, 5-20P, L5-20P & L5-30P
Resetable circuit beaker with surge protection
UL and CUL rated
Crestron TPS-12b 12” Black Tilt Touchpanel
Features:
12" active matrix touchscreen display | 800 x 600 resolution
24-Bit Isys graphics | Synapse image rendering algorithm
Full-motion video with gamma correction and motion adaptive
deinterlacing
Page
5
of
20______Pages
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
Built-in amplified speaker system and microphone
Full-motion video with gamma correction and motion adaptive
deinterlacing
QuickMedia and Crestron Home CAT5 AV connectivity
High-speed Ethernet and Cresnet communications
Tiltcase housing with integral rear cover and cable strain relief
Backlit "Softkey" pushbuttons
Aspect Ratio: 4:3 SVGA
Resolution: 800x600 pixels
Brightness: 400 nits (cd/m2)
Contrast: 300:1
Viewing Angle: ±70° horizontal, +45/-55° vertical
CPU: 32-bit Freescale ColdFire® Microprocessor
DDR Ram: 128 MB
Flash: 32MB
8
1
Ea
Crestron QM-MD7x2 Media Distribution Center
$
Features:
Video In 1 – 3: (9) BNC female; (3) sets of (3) inputs, each set
configurable as: (1) Component/HDTV (YPbPr or RGsB) video
input, or (1) S-Video (Y/C) input and (1) Composite input
Input Impedance: 75 ohms; Maximum Input: 1V p-p for Y/Gs;
0.7V p-p for Pb/B and Pr/R; Discrete video sync detection on
COMP/Y/Gs
RGB 4 – 5: 2) DB15HD female; (2) RGBHV (VGA) inputs;
Input Impedance: 75 ohms (R/G/B); Maximum Input Voltage:
.07V p-p; Maximum H and V Sync: 5.0V p-p into 1k ohms;
Video sync detection on H-SYNC
RGB 5 OUTPUT: (1) DB15HD female; Buffered RGBHV passthru from RGB 5 input
AUD 1 – 5: (5) 3-pin 3.5mm detachable terminal blocks; (5)
Unbalanced stereo line-level audio inputs; Maximum Input Level:
2 Vrms; Input Impedance: 10K ohms
MIC/LINE 1 – 2: (2) 5-pin 3.5mm detachable terminal blocks;
(2) Balanced microphone/line inputs; Balanced Mic Input Level: 60 to -20 dBV nominal; Balanced Line Input Level: -28 to +12
dBV; 4 Vrms maximum; Unbalanced Input Level: -28 to +6
dBV; 2 Vrms maximum; Mic Input Impedance: 10k ohms,
accepts balanced microphones 60 to 600 ohms; Line Input
Impedance: 4k ohms (balanced), 2k ohms (unbalanced); Phantom
Power: 10 mA (total) @ 48 Volts DC, software enabled
Page
6
of
20______Pages
$
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
independently to either input
SP AUDIO OUT 1 – 2: (2) 3-pin 3.5mm detachable terminal
blocks; (2) Speech-channel balanced line-level outputs;
Maximum Output: 4Vrms balanced, 2Vrms unbalanced (per
channel); Output Impedance: 200 ohms balanced, 100 ohms
unbalanced
PRG AUDIO OUT 1 – 2: (2) 5-pin 3.5mm detachable terminal
blocks; (2) Stereo program-channel balanced line-level outputs;
Maximum Output: 4Vrms balanced, 2Vrms unbalanced (per
channel); Output Impedance: 200 ohms balanced, 100 ohms
unbalanced
IN 6 – 7: (2) 8-wire RJ45 female and (2) 4-pin 3.5mm detachable
terminal blocks; (2) QuickMedia input ports with Cresnet ports;
Connect via CAT5e/6* to QM output ports of other QuickMedia
devices
OUT 1 – 2: (2) 8-wire RJ45 female and (2) 4-pin 3.5mm
detachable terminal blocks; (2) QuickMedia output ports with
Cresnet ports; Connect via CAT5e/6* to QM input ports of other
QuickMedia devices
NET: (1) 4-pin 5mm detachable terminal block; Cresnet slave
port; Connects to Cresnet control network
PWR: Indicates 24 Volts DC power supplied from Cresnet
control network
7X2 Video/RGB Matrix Routes any of (3) composite, S-Video,
or component/HDTV, (2) RGBHV, and (2) QM inputs to either
of (2) QM outputs
Gain: 0dB
Crosstalk: -60dB
Buttons with LEDs: Audio Break, A, V, SYS, Local, Enter, IN 1
– 8, OUT 1 – 2, Speech audio out 1-2, PGM Audio Out 1 – 2,
Setup
Cresnet Power Usage: 30 Watts (1.25 Amps @ 24 Volts DC)
A-D/D-A Conversion: Burr Brown 24-bit, 48 kHz
Output Volume Range: -80dB to +20dB, 0.1dB steps plus mute
Mixer Volume Range: -80dB to 0dB, 0.1dB steps
Input Compensation: ±10dB, 0.1dB steps
Mic Level Indicators (via software): 20dB below clipping
(Norm), 6dB below clipping (Overload)
Mic Input Gain: 0 to 100 % (0 to 40 dB) plus mute
Frequency Response: 20Hz to 20kHz ±0.5dB
S/N Ratio: 90dB, 20Hz to 20kHz A-weighted
THD+N: 0.05%, 20Hz to 20kHz
Gate Level: 0 to 100 %
Page
7
of
20______Pages
Unit Price
Amount
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
Attack: 0 to 100 mS
Decay (Release): 0 to 5000 mS
PEQ Filter Gain: ±12dB, 0.01 dB steps from DMT
PEQ Filter Types: low pass, high pass, EQ filter (peaking/
notching ), bass shelf, and treble shelf
GEQ Filter Gain: ±12dB, 0.1dB steps from DMT; ±10dB, 0.1dB
steps from SIMPL
9
1
Ea
Crestron QM-MD8x8 Media Distribution Center
$
$
$
$
Features:
Eight input by eight output matrix switching of composite video,
S-video, RGB, and audio signals
Switching scheme allows one QuickMedia (also known as QM)
input to be switched to one, multiple, or all available QM outputs
Separate switching of audio and video portions of QM input
signals
Eight QuickMedia inputs (RJ-45) for connection to QM wall
plates and/or QM table top media centers
Eight QM outputs (RJ-45) for connection to QM receivers
Power Requirements: 30 Watts (1.25 Amp @ 24 VDC)
Performance Gain: 0 dB
Performance Input Impedance: 100 ohms
Performance Nominal Output Impedance: 100 ohms
Performance Differential Input Impedance: 50 ohms common
Performance Differential output Impedance: 50 ohms common
10
1
Ea
Crestron QM-TX Quickmedia Transmitter
Features:
Video: Gain - 0dB (75 ohm termination), Bandwidth - 100MHz
(-3dB) at unity gain, Formats- Supports standard definition
and HDTV up to 720p and 1080i
RGB: Gain - 0dB (75 ohm termination),
Maximum Resolution 1600x1200 @ 60Hz (at unity gain) with cable length of 100
meters and maximum compensation at receiver,
Audio: A-D Conversion - Burr Brown 24-bit, 48 kHz, Frequency
Response - 20Hz to 20kHz
Connectors: R/C/Pr, G/Y/Y, B/COMP/Pb, H, V - (5) BNC fe male, RGB/Video input; Formats: RGBHV, RGBS, RGsB,
YPbPr, S-Video (Y/C), composite; Input Impedance: 75 ohms
(R/C/Pr, G/Y/Y, & B/COMP/Pb); 620 ohms (H and V);
Maximum Input Voltage: 0.7 Vp-p for RGB and C of S-Video; 1
Page
8
of
20______Pages
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
Vp-p for composite and Y of S-Video; 5 Vp-p for H and V Sync;
Video signal detection on Y, COMP, and H, AUDIO - (1) 5-pin
3.5mm detachable terminal block; Balanced/unbalanced stereo
line-level audio input; Maximum Input Level: 4 Vrms balanced, 2
Vrms unbalanced; Input Impedance: 10k ohms balanced, 5k ohms
unbalanced, QM OUT - (1) 8-wire RJ45 female; QuickMedia
output port; Connects to QM input port of touchpanel of other
QuickMedia device via CresCAT-QM or CresCAT-IM cable,
NET - (2) 4-pin 3.5mm detachable terminal blocks; Cresnet slave
ports, paralleled; Connect to Cresnet control network , G - (1) 632 screw, chassis ground lug
LED Indicators: PWR - (green) Indicates 24 Volts DC power
supplied from Cresnet control network, NET - (yellow) Indicates
communication with Cresnet system, Video Act - (red) Indicates
presence of a valid video input signal, Setup (rear) - (red) Used
for touch-settable ID (TSID)
Controls: Setup - (1) Button for touch-settable ID (TSID)
Power Requirements: Cresnet Power Usage - 5 Watts (0.21 Amp
@ 24 Volts DC)
11
7
Ea
12
1
Ea
13
1
Ea
Crestron QM – RX Quickmedia Receiver
Features:
One bi-directional COM port with programmable serial drivers
for controlling devices over RS-232
One IR port - compatible with Crestron® ST-SPL IR Splitter, for
IR-control of up to five different devices, programmable via the
hundreds of IR device drivers available in the Crestron databases
One digital input port for direct connection of power sensor,
pressure sensor, door sensor, room occupancy sensor,
Composite, S-video and RGBHV output ports
Crestron CNXRMAK Rack Mount Kit
Features:
Black finished mounting plate and (12) 6-32, 3/8" pan head
Phillips screws
Dimensions: 19.00" / 48.26cm (W) x 3.5" / 8.89cm (H)
Crestron QM – AE Audio Extractor
Page
9
of
20______Pages
$
$
$
$
$
$
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Features:
4X3 Audio Matrix Mixer, 3-Channel Signal Processor, Auto
Compensation with Self-Peaking
D-A Conversion: Burr Brown 24-bit, 48 kHz
Output Volume Range: -80dB to +20dB, 0.1dB steps plus mute
Input Volume Range: -80dB to 0dB, 0.1dB steps
Input Compensation: ±10dB
Microphone Input EQ: 4-band GEQ per input, ±12dB, 0.1 dB
steps from DMT; ±10dB, 0.1 dB steps from SIMPL
Speech Output Delay: 0 to 40 mS
Bass/Treble Gain Range: ±15dB, 0.5dB steps from SIMPL
Output Equalization Modes: 10-band graphic plus 2-band
parametric; Selectable 5-band graphic plus 7-band parametric;
speech optimized 5-band graphic plus 7-band parametric; 3-band
graphic plus 9-band parametric; or 12-band parametric
PEQ Filter Gain: ±12dB, 0.01 dB steps from DMT
PEQ Filter Bandwidth: .02 to 2.0 octaves (1.0 to 3.0 for
shelving) from DMT
PEQ Filter Center Frequency: 25Hz to 19.9kHz from DMT
PEQ Filter Types: low pass, high pass, EQ filter (peaking /
notching), bass shelf, and treble shelf
GEQ Filter Gain: ±12dB, 0.1dB steps from DMT; ±10dB, 0.1dB
steps from SIMPL
Frequency Response: 20Hz to 20kHz ±0.5dB
S/N Ratio: 94dB (line), 90dB (speaker) 20Hz to 20kHz Aweighted
THD+N: 0.05% (line), 0.7% (speaker) 20Hz to 20kHz
Video/RGB: Provides unbuffered, unprocessed pass-thru of
video/RGB portion of QM signal; does not effect delay skew,
bandwidth, or gain
Connectors: LINE OUT SPCH - (1) 3-pin 3.5mm detachable
terminal block; Speech-channel balanced line-level audio output;
Maximum output: 4Vrms balanced, 2Vrms unbalanced; Output
impedance: 200 ohms balanced, 100 ohms unbalanced, LINE
OUT L – R - (2) 5-pin 3.5mm detachable terminal blocks; Stereo
program-channel balanced line-level audio output; Maximum
output: 4Vrms balanced, 2Vrms unbalanced (per channel);
Output impedance: 200 ohms balanced, 100 ohms unbalanced,
QM IN - (1) 8-wire RJ45 female, QuickMedia input port;
Connects to QM output port of another QuickMedia device via
CresCAT-QM or CAT5e/6, QM OUT - (1) 8-wire RJ45 female,
QuickMedia output port; Connects to QM input port of another
QuickMedia device via CresCAT-QM or CAT5e/6, NET - (2) 4-
Page
10
of
20______Pages
Unit Price
Amount
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
pin 3.5mm detachable terminal blocks; Cresnet slave ports,
paralleled, connect to Cresnet control network, G - (1) 6-32
screw, chassis ground lug
LED Indicators: PWR - (green) Indicates 24 Volts DC power
supplied from Cresnet control network, NET - (yellow) Indicates
communication with Cresnet system, Setup (rear) - (red) Used for
touch-settable ID (TSID)
Controls: Setup - (1) Button for touch-settable ID (TSID)
Cresnet Power Usage: 5 Watts (0.21 Amp @ 24 Volts DC)
14
2
Ea
Crestron QM WMC Quick Media Wall Plates
Features:
Connectors: S-VIDEO- (1) 4-pin mini DIN female; S-Video
input; Input Impedance: 75 ohms; Maximum Input: 1V p-p;
Video sync detection on Y: S-VIDEO AUDIO- 2) RCA female;
Unbalanced stereo line-level audio input; Maximum Input Level:
2 Vrms; Input Impedance: 10K ohms: VIDEO- 1) RCA female;
Composite video input; Input Impedance: 75 ohms; Maximum
Input: 1V p-p; Video sync detection: VIDEO AUDIO- (2) RCA
female; Unbalanced stereo line-level audio input; Maximum
Input Level: 2 Vrms; Input Impedance: 10K ohms:
COMPUTER- (1) DB15HD female; RGB(VGA)/Component
video input; Formats: RGBHV, RGBS, RGsB, YPbPr;
EDTV/HDTV: 480p, 720p, 1080i; Input Impedance: 75 ohms
(R/G/B); Maximum Input Voltage: 1V p-p; Maximum H Sync:
5.0V p-p into 1k ohms; Maximum V Sync: 5.0V p-p into 2.2k
ohms; Video sync detection on H-SYNC only: COMPUTER
AUDIO- (1) 3.5mm TRS mini phone jack; Unbalanced stereo
line-level audio input; Maximum Input Level: 1 Vrms; Input
Impedance: 10K ohms: Monitor- (1) DB15HD female; Buffered
RGBHV pass-thru: To Mic- (1) 14-pin header; Connects to
optional QM-WMIC via ribbon cable provided: QM- (1) 8-wire
RJ45 female; QuickMedia output port; Connects via CAT5e/6*
to QM input port of another QuickMedia device: Net- (2) 4-pin
3.5mm detachable terminal blocks; (2) Cresnet slave ports,
paralleled; Connect to Cresnet control network
LED Indicators: PWR- Indicates 24 Volts DC power supplied
from Cresnet control network: NET- Indicates communication
with Cresnet system: SET-UP- Used for touch-settable ID
(TSID): COMP- Indicates presence of a signal at the
COMPUTER input: VIDEO- Indicates presence of a valid signal
at the VIDEO input: S_VID- Indicates presence of a valid signal
Page
11
of
20______Pages
$
$
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
at the S-VIDEO input
VIDEO: Gain- 0dB (75 ohm termination): Bandwidth- 100MHz
(-3dB) at unity gain
RGB: Gain- 0dB (75 ohm termination): Maximum Resolution
Refresh Rate- 1600x1200 @ 60Hz (at unity gain);
With cable length of 100 meters and maximum compensation at
receiver: Maximum CAT5e/6 Cable Delay Skew- 15ns per 100
meters
3x1 Stereo Audio Switcher: A-D Conversion- Burr Brown 24bit, 48 kHz: Frequency Response- 20Hz to 20kHz
15
16
17
18
2
2
2
4
Ea
Crestron CNTBLOCK Network Junction Module
Ea
Features:
Connectors: (8) 4-pin network connectors
LED Indicators: Power - Green LED illuminates when power
supplied to unit, NORM ON (Y) - Red LED with three states
(bright, dim and off ) in various configurations indicates whether
wiring through the CNTBLOCK is correct, NORM OFF (Z) Red LED with three states (bright, dim and off ) in various
configurations indicates whether wiring through the CNTBLOCK
is correct
Power Requirements: 24VDC
Crestron IR Probe w/out diode PRO2/AV2
Ea
Features:
Connectors: 2-pin for output from IR/serial port of the 2-Series
control system and the C2IR-8 card
Mini-wire lead: 3' / 0.91m long
Cable: 7' / 2.13m long
Crestron CNPWS-75 75 watt Power Supply
Ea
Features:
Connectors: NET - (2) 4-pin network connectors; for connection
to the Cresnet control network, Input Plug - (1) 3-prong plug; for
use with power supply cord; included
LED Indicators: NETPOWER - Indicates 24VDC being supplied
to Cresnet control network
Power: Input- 100VDC to 250VAC, 2.3A max., Output 24VDC, 75W, Output Fuse Rating – 4A, Ripple/Noise - Less
than 300mV
Crestron MK-QM-RMCRX Mounting Kit for QM-RX
Page
12
of
20______Pages
$
$
$
$
$
$
$
$
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
19
3
Ea
20
21
22
1
2
1
Ea
Ea
Ea
Detailed Description - Double Space Between Items
Unit Price
Amount
Crestron ST-RMK Smarttouch Rack Mount Kit
$
$
$
$
$
$
$
$
$
$
$
$
$
$
Crestron CNXLIR Ir/Serial Control Learner
Crestron CRESCAT-QM-NP-SP500 Low-skew CAT5e plus
Cresnet control cable, non-plenum, 500 ft spool
TOA A-903MK2 Modular 30-Watt Amplifier or Acceptable
Equal
Manufacturer: __________________ Model: _______________
23
24
25
2
1
4
Ea
Ea
Ea
Features:
Eight Module Slots
25V, 70V and 4 Ohm Transformer Isolated Speaker Outputs
Dual Mute Bus
External Mute Terminals
Power bandwidth: (D) 20 - 20k Hz, 0.5% THD; (T) 50 - 20k Hz,
0.5% THD
Frequency Response: (D) 20 - 20k Hz, ±1 dB; (T) 20 - 15k Hz,
±1 dB (T) 20 - 20k Hz, +1 dB / -3 dB
Total Harmonic Distortion: 0.02% at 1k Hz, rated output
8 input ports: every port accepts any input module 1 Bridging
Input/Output
Dynamic Range: Master Volume set to min: 90dB, Master
Volume set to max: 77dB, Power amplifier only: 105dB
Tone Controls: Bass: ±10 dB at 100 Hz; Treble: ±10 dB at 10k
Hz
Indicators: Normal, Peak, Power, Protect, and Signal LEDs
TOA B-01 Balanced Line Input or Acceptable Equal
Features:
Input Impedance: 10k ohms, balanced transformer-isolated
Sensitivity: -16 dBu
Gain: -1 dB
TOA MB-25B Rackmount Kit for A-903MK2 Amplifier or
Acceptable Equal
Mitsubishi MDT461S LCD Monitor or Acceptable Equal
Manufacturer________________ Model______________
Features:
Screen Size: 46" Diagonal
Page
13
of
20______Pages
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
26
Quantity
4
Unit
Ea
Detailed Description - Double Space Between Items
Unit Price
Amount
Resolution: 1366x768
Aspect Ratio: 16:9
Contrast Ratio: 800:1
Brightness: 450 cd/m2
Displayable Colors: 16 million colors
Viewing Angle: 170°
Dimensions (W x H x D): 43.8" x 25.8" x 5.5"
Weight: 72.1 lbs.
15 Pin Connector
INPUTS: Composite-BNC, RGB-5 BNCs, DVI Digital Input-24
pin DVI-D, RGB-15-Pin Dsub, S-Video-4-pin DIN
Chief PCS2045 Ceiling mount for 46” LCD Monitor or
Acceptable Equal
Manufacturer________________ Model______________
27
4
Ea
$
$
$
$
$
$
Chief CMA0911 Adjustable Extension Column (9’-11’) or
Acceptable Equal
Manufacturer________________ Model______________
28
3
Ea
Shure ULXP4 Single Diversity Wireless Receiver or
Acceptable Equal
Manufacturer________________ Model______________
Features:
RF Carrier Freq Range: 554.000-865.000
Effective Range: 100m
Audio Frequency Response: 25-15,000 Hz,±2 dB
Modulation: ± kHz deviation compressor-expander system with
pre- and de- emphasis
Dynamic Range >100dB, A-weighted
RF Sensitivity: 1.26µV for 12dB SINAD
Image Rejection: 80 dB typical
Spurious Rejection: 75 dB typical
Power Requirements: 14-18 Vdc (negative ground), 550 mA
XLR connector (into 600 ohm load): +3.9 dBV (line), -17 dBV
(mic)
¼ “ connector (into 3000 ohm load) -2 dBV
Impedance: (output) 50 ohms at line level; 2000 ohms at mic
level
Page
14
of
20______Pages
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
29
Quantity
2
Unit
Ea
Detailed Description - Double Space Between Items
Unit Price
Amount
Automatic Frequency Selection with group scan function
5-segment audio meter
5-segment RF meter
Squelch adjustment
Frequency and volume lockout
Shure WL 185 Cardiod Lapel Microphone or Acceptable
Equal
Manufacturer________________ Model______________
30
2
Ea
$
$
$
$
$
$
$
$
Shure ULX 1 Bodypack Transmitter or Acceptable Equal
Manufacturer________________ Model______________
Features:
Gain Adjustment Range: 40 dB (continuously adjustable)
Impedance: input: 1 MΏ
RF Power Output: 30 mW maximum
31
1
Ea
Shure ULX2-87A Handheld Microphone/Transmitter or
Acceptable Equal
Manufacturer________________ Model______________
Features:
Type: Condenser
Connectivity: Wireless
Sound Mode: Mono
Polarity: Superdcardioid
Frequency Response: 25-15000 Hz
Wireless Technology: RF
Max. Transmit Range: 300ft/90m
32
1
Ea
Shure UA 844 Antenna Distribution System or Acceptable
Equal
Manufacturer________________ Model______________
Features:
Carrier Frequency Range: 470-900 MHz
Distributed RF Output Level (Gain): –0.5 to 3 dB, 1 dB typical,
from antenna input (unused ports terminated with 50 Ω)
Page
15
of
20______Pages
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
Output Connector Isolation: ≥25 dB
Third Order Intercept Point (3 OIP): 24 dBm, typical
DC Input Voltage: 14 to 18 Vdc
DC Output Voltage: 14 to 18 Vdc, 4 connectors
DC AntennaVoltage: 12 Vdc
Impedance: 50 Ω
RF Input/Output Antenna Connector Type: BNC
33
2
Ea
Stewart P20150VTS10-38 90”x120” Screen or Acceptable
Equal
Manufacturer________________ Model______________
$
$
$
$
Features:
Rigid Rear Projection
Gain: 1.0
Half Gain: 0.50 @ 43°
Reflective/Back Scatter: .18
34
1
Ea
Soundcraft 4848L 48” Lectern or Acceptable Equal with
Natural Oak Laminate and the following accessories:
Cable Cubby
Custom Cutout
Digital Clock
Deluxe wood Trim
Euro-Hinged Doors
Heavy-Duty Swivel Casters
Keyboard Drawer
Adjustable LCD Monitor Mount
18” Littlite with Dimmer
Microphone Mount Installation
Pocket Pivot Doors
16 Space Rack Mount
Revealed Panel Option
Adjustable Shelf with Installed Standards
Wiring Duct
Locking horizontal side panel for document camera
Manufacturer________________ Model______________
35
3
Ea
Soundcraft 3636C 36” Lectern or Acceptable Equal with
Natural Oak Laminate and the following accessories:
Page
16
of
20______Pages
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
Cable Cubby
Custom Cutout
Digital Clock
Deluxe wood Trim
Euro-Hinged Doors
Heavy-Duty Swivel Casters
Keyboard Drawer
Adjustable LCD Monitor Mount
18” Littlite with Dimmer
Microphone Mount Installation
Pocket Pivot Doors
16 Space Rack Mount
Revealed Panel Option
Adjustable Shelf with Installed Standards
Wiring Duct
Locking horizontal side panel for document camera
Manufacturer________________ Model______________
36
1
Ea
$
$
$
$
$
$
Sony SLV D360P DVD/VCR Player or Acceptable Equal
Manufacturer________________ Model______________
37
3
Ea
Features:
Video D/A converter: 10bit / 54MHz
Supported digital audio standards: MP3, PCM
Media type: CD, DVD, CD-R, SVCD, CD-RW, DVD+R, DVDR, DVD+RW, DVD-RW, Video CD, Kodak Picture CD
MP3 compatible: Yes
Media Load Type: Tray
Input/Output connections: 1 x Composite video/audio input
(RCA phono x 3) - Front, 1 x Composite video/audio input (RCA
phono x 3) - Rear, 1 x Composite video/audio output (RCA
phono x 3) - Rear, 1 x Component video output (RCA phono x 3)
- Rear, 1 x SPDIF output (TOS Link) - Rear, 1 x SPDIF output
(RCA phono) - Rear, 1 x S-Video output (4 pin mini-DIN) - Rear,
1 x Audio line-out (RCA phono x 2) - Rear, 1 x RF input (F
connector) - Rear, 1 x RF output (F connector) - Rear
ClearOne XAP-400 Audio Matrix Mixer with Amp Out(RS232 Control) or Acceptable Equal
Manufacturer________________ Model______________
Page
17
of
20______Pages
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
38
Quantity
1
Unit
Detailed Description - Double Space Between Items
Ea
Features:
Distributed Echo Cancellation: Places an echo canceller on every
mic input for greater accuracy and cleaner audio
Noise cancellation
Four independent processing blocks: Features 15 filters, delay,
and compression for pinpoint audio configuration
Automatic mic mixing
32 user configurable presets
RS-232 Controllable
Wolfvision VZ-9 Document Camera or Acceptable Equal
Unit Price
Amount
Manufacturer________________ Model______________
39
2
Ea
$
$
$
$
Features:
Camera: 1-CCD 1/3”
Pictures per second: 30 frames
Effective Pixel: 1024x768
Native signal output (4:3): XGA (1024x768)
Resolution: 640 lines
Resoluton in Image turn mode: 820 lines
Image Rotation: 90°, 180°, 270°
Autofocus
Manual focus
Horizontal image frequency: 15.7 and 37.3 – 90 kHz
Vertical image frequency: Prog. Scan: 85, 75 and 60 Hz
On Screen Menu
Lens/Zoom: 48x zoom (12x optical +4x digital incl. Macro)
Long life halogen spot light with diffuser lens and glare
protection
Articulated arm
Eiki LC-X6A 6500 Lumens XGA projector or Acceptable
Equal
Manufacturer________________ Model______________
Features:
Brightness: 6500 Lumens
Contrast: 1300:1
Networking: Wired
H-Sync Range: 15.0 - 120.0kHz
V-Sync Range: 48 - 120Hz
Compatibility: HDTV- 1080i, 1035i, 575i, 575p
EDTV/480p: Yes
Page
18
of
20______Pages
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
40
Quantity
2
Unit
Ea
Detailed Description - Double Space Between Items
Unit Price
Amount
SDTV/480i: Yes
Component Video: Yes
Video: Yes
Digital Input: DVI-D (HDCP)
Personal Computers: Yes
Display Type: 1.4" PolySi LCD (3)
Native: 1024x768 Pixels
Maximum: 1600x1200 Pixels
Aspect Ratio: 4:3 (XGA)
Lamp: 300W UHP
Voltage: 100V-240V
Eiki AH-32021 1.18” fixed 30mm f:2.5 Fixed Projection Lens
Manufacturer________________ Model______________
41
42
1
4
Ea
Ea
$
$
$
$
$
$
Clear One XAP800 Digital Mixer
Features:
Frequency Response: 20Hz to 20kHz ± 1dB
Noise (EIN): -126 dBu, 20kHz BW,
Mic/Line Inputs 1-8
Line Inputs 9-12
Outputs 1-12
Automatic level and gain control
RS-232 Controllaable
Polycom VS-8400 Videoconferencing Unit Presenter VTX
Features:
Max Data Rate IP & ISDN: 2 Mbps
Networking Interfaces 1xRJ 45-10/100 Base-TX (Ethrnet)
Supported Standards: H.231, H.233, H.234, H.235-v3, H.225,
H.239, H.241, H.281, H.245, H.320, H.323, SIP, H.221, H.224
Codecs: G.711, G.729A, G.722, H.263+, H.261, H.264, G.728,
H.263++, G.722.1
Protocols: TCP, UDP, FTP, SNMP, RTP, HTTP, DHCP, Telnet,
NAT, ARP
Audio Inputs: RCAx2
Video Inputs: S-Video (4-Pin mini DIN)x2
Video Outputs: S-Video (4-Pin mini DIN)x2
Video Frame Rate: 60 Frames per Second
Video Formats: PAL, NTSC, VGA, SVGA, XGA
Zoom: 10x Zoom
Page
19
of
20______Pages
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Unit Price
Amount
Tilt Range +/- 25 (Up/Down)
Pan Range +/- 100 (Left/Right)
Total
Page
20
of
$
20______Pages
$
OKLAHOMA STATE UNIVERSITY
CONTINUATION SHEET
To Accompany Requisition No.OS06142
TULSA, OKLAHOMA
Item
No.
Quantity
Unit
Detailed Description - Double Space Between Items
Page
21
of
20______Pages
Unit Price
Amount
Download