Please fax free to 0800 722 649 or email to info@ansutek.co.nz 1/6 General data XE100 CC compact Quotation questionnaire Order placement Representative Invoice addressee Company: Person to contact: Function / Dept.: Street: Town / Post code: Phone: Fax.: Company: Person to contact: Function / Dept.: Street: Town / Post code: Phone: Fax.: Ordering company Final customer / Delivery address Company: Person to contact: Function / Dept.: Street: Town / Post code: Phone: Fax.: Company: Person to contact: Function / Dept.: Street: Town / Post code: Phone: Fax.: E-mail: GARVENS customer No.: Final customer V.A.T. No.: E-mail: Pricing: Kind of shipment: Packaging: Payment conditions: Date for delivery: GARVENS order No.: Drawing No. for quotation: Reference order: Qty. of machines: units. Customer's order No.: Product samples: Not necessary according to agreement with Not possible drawing / photo attached (GARVENS staff) on despatched by separate mail on (If no original samples are provided despite the request by GARVENS, we cannot be held responsible for any possible wrong choice of belt material, photocells etc. And we reserve the right that the confirmed characteristics may be valid only with restrictions or not all.) If a weigher shall be delivered with MID 1 original samples are obligatory Warranty conditions as per GARVENS Terms and Conditions of Sale and Delivery. Article Information Article name (blister, powder...): Kind of packing (can, bag, pouch…): Material (cardboard, film/foil, glass...) open / closed: Length in dir. of feed or Diameter [mm]: Width [mm]: max. 600 mm Height [mm]: max. 260 mm Weight [g]: max. 60.000 g Throughput [pcs./minute]: Accuracy [g]: at Sigma (σ): (please attach separate list if more than 4 articles) Product 1 Product 2 Product 3 Product 4 Please fax free to 0800 722 649 or email to info@ansutek.co.nz 2/6 General article information dry humid oily/greasy instable miscellaneous: coarse deep-frozen slippery °C Given dist. between products’ centres: mm Required dist. between products’ centres: Conveyor speed of customer’s systems: Required conveyor speed: m/min. Maximum load: g Definition (resolution): g Weighing range: g to g raw hot caustic/acid reflective °C MID conformity assessment mm m/min. (Observe whether checkweigher shall be officially calibrated!) incl. MID Box Suitable for official calibration: Design approval in: Direction of transport: leftright rightleft Line height (500-1000): mm (Separate cabinet) Product transport Speed of the existing infeed conveyor (customer): Roller diameter (infeed of customer’s conveyor): Speed of the existing outfeed conveyor (customer): Roller diameter (outfeed of customer’s conveyor): Product sequence: butt-to-butt regular gaps irregular gaps infeed in product groups gap between groups: gap between products: additional information: Product infeed: single article Environmental conditions Placement: ground floor floor platform, stage, scaffold: height Local Conditions: strong air draught by machines, ventilators, door or windows floor vibration extreme temperature from high air humidity, approx. rel. dusty atmosphere °C to °C % use in wet environment Options and accessories, weighing terminal Remote display FAZ W 100 cable length: Metal detector selection (with display on MD) Frequency range (only one choice possible): 3 Frequencies: L(25+100+300 kHz) H(100+300+800 kHz) MD case finish: Pass width MD [mm] Pass Height MD [mm] Usable height [mm] painted silver 700 300 260 m Please fax free to 0800 722 649 or email to info@ansutek.co.nz 3/6 Conveyors Weighing conveyor [mm]: 1200x600 mm Monitoring devices yes no Backup detection light barrier: Light barrier on infeed outfeed customer's conveyor with automatic conveyor shutdown with automatic conveyor shutdown + pot. free contact pot. free contact separate rejection rejection Further electric / electronic options and accessories Emergency stop: Transformer for special voltage: em. stop input contact em. stop push-button increased "emergency stop" category (as per EN 60947-5-1-3) for yes V no Hz Pressure monitoring device: Conveyor START/STOP, remote: automatic conveyor shutdown by customer's system activates potential-free output contact/conv. Shutdown housing w. push-buttons, cable m Potential-free outputs (contacts): timer Classification outputs: pfc 1 for signalling: Zone Good pfc 2 for signalling: pfc 3 for signalling: pfc 4 for signalling: Zone T1+ Zone T1Metal Pot.-free input f. "final evaluation": Pot.-free input f. "reset counters ": Pot.-free input f. "finish batch": Action input 1 Action input 2 Action input 3 stat. signal dyn. signal Function: Function: Function: Signalling device: (standard: with 4 light elements) (available colours: red, green, amber, white, and blue) light element in colour light element in colour light element in colour light element in colour light element in colour horn, for signalling: for signalling: for signalling: for signalling: for signalling: for signalling: Kind of signal: dynamic signal Motor controlled by customer using external guide voltage Checkweigher controls the customer's conveyor motor Checkweigher controls customers rejecting device (pfc) static (permanent) Please fax free to 0800 722 649 or email to info@ansutek.co.nz Programs / Interfaces (max. 1 interface port possible!) yes 4/6 no Other interfaces: GARECO Weight data CL 20 active CL 20 passive RS232 RS422 RS485 Profibus (Miface Modul) Weight zones 3 (Standard) 4 5 OPC Server PINYIN Chinese editor Binary article No. output to PLC Fieldbus interface / system Type of fieldbus: ProfiNet DeviceNet Ethernet IP ProdX Interface Driver Interface FreeWeigh: Statistics program FW.Net incl. Article download Ethernet RS232 Interface cable: 5m 10m length (in meter): m Statistics only with attached ticket printer with Printstick PrintStick-compl.kit/first installation PrintStick extension Add. PrintStick pcs. Please fax free to 0800 722 649 or email to info@ansutek.co.nz 5/6 Miscellaneous Installation of the interface connection(s) by: GARVENS METTLER TOLEDO Customer, name: (It must be ensured, if the customer will do the installation himself, that he has sufficient expertise/know-how to do the interface configuration and connections himselfor Any service intervention necessary will be fully invoiced in cases where an after-sales service engineer is called to solve problems and where the engineer can demonstrate that the GARVENS interface port works correctly.) Initial operation by: GARVENS METTLER TOLEDO On-screen dialogue language: Customer, name: trTR daDK deDE elGR enUS frFR svSE nnNO ruRU hrHR nlNL plPL itIT esE csCZ ptBR ptPT huHU roRO zhCN zhTW thTH slSI skSK srCS fiFI csCZ daDK deDE enGB esES frFR itIT nlNL plPL ruRU slSI skSK svSE Language of operating instructions: Quantity: (additional charge for more than two copies) Type/ratings plate: FAT (1 day): deDE enGB frFR daDK huHU fiFI itIT nlNL date: Add. FAT day(s): EQ Pac: plPL days deDE enGB Spare parts kit Wear Part Kit Complete Kit Wear Part Kit plus motor Customized Kit Communication package: (not available in all countries) Silver Gold Platinum Supplementary text / Comments Electronic Kit trTr svSE hrHR esES Please fax free to 0800 722 649 or email to info@ansutek.co.nz 6/6 Pricing Option Date: Gross list price Name: Signature: Currency